Gateway Address

The Gateway API provides an optional Addresses field through which Envoy Gateway can set addresses for Envoy Proxy Service. Depending on the Service Type, the addresses of gateway can be used as:

Prerequisites

Follow the steps from the Quickstart to install Envoy Gateway and the example manifest.

External IPs

Using the addresses in Gateway.Spec.Addresses as the External IPs of Envoy Proxy Service, this will require the address to be of type IPAddress and the ServiceType to be of LoadBalancer or NodePort.

The Envoy Gateway deploys Envoy Proxy Service as LoadBalancer by default, so you can set the address of the Gateway directly (the address settings here are for reference only):

kubectl patch gateway eg --type=json --patch '
- op: add
  path: /spec/addresses
  value:
   - type: IPAddress
     value: 1.2.3.4
'

Verify the Gateway status:

kubectl get gateway
NAME   CLASS   ADDRESS   PROGRAMMED   AGE
eg     eg      1.2.3.4   True         14m

Verify the Envoy Proxy Service status:

kubectl get service -n envoy-gateway-system
NAME                            TYPE           CLUSTER-IP      EXTERNAL-IP   PORT(S)        AGE
envoy-default-eg-64656661       LoadBalancer   10.96.236.219   1.2.3.4       80:31017/TCP   15m
envoy-gateway                   ClusterIP      10.96.192.76    <none>        18000/TCP      15m
envoy-gateway-metrics-service   ClusterIP      10.96.124.73    <none>        8443/TCP       15m

Note: If the Gateway.Spec.Addresses is explicitly set, it will be the only addresses that populates the Gateway status.

Cluster IP

Using the addresses in Gateway.Spec.Addresses as the Cluster IP of Envoy Proxy Service, this will require the address to be of type IPAddress and the ServiceType to be of ClusterIP.