This is the multi-page printable view of this section. Click here to print.

Return to the regular view of this page.

Welcome to Envoy Gateway

Envoy Gateway Documents

Envoy Gateway is an open source project for managing Envoy Proxy as a standalone or Kubernetes-based application gateway. Gateway API resources are used to dynamically provision and configure the managed Envoy Proxies.

architecture

Ready to get started?

1 - Tasks

Learn Envoy Gateway hands-on through tasks

1.1 - Quickstart

Get started with Envoy Gateway in a few simple steps.

This “quick start” will help you get started with Envoy Gateway in a few simple steps.

Prerequisites

A Kubernetes cluster.

Note: Refer to the Compatibility Matrix for supported Kubernetes versions.

Note: In case your Kubernetes cluster, does not have a LoadBalancer implementation, we recommend installing one so the Gateway resource has an Address associated with it. We recommend using MetalLB.

Installation

Install the Gateway API CRDs and Envoy Gateway:

helm install eg oci://docker.io/envoyproxy/gateway-helm --version v1.0.2 -n envoy-gateway-system --create-namespace

Wait for Envoy Gateway to become available:

kubectl wait --timeout=5m -n envoy-gateway-system deployment/envoy-gateway --for=condition=Available

Install the GatewayClass, Gateway, HTTPRoute and example app:

kubectl apply -f https://github.com/envoyproxy/gateway/releases/download/v1.0.2/quickstart.yaml -n default

Note: quickstart.yaml defines that Envoy Gateway will listen for traffic on port 80 on its globally-routable IP address, to make it easy to use browsers to test Envoy Gateway. When Envoy Gateway sees that its Listener is using a privileged port (<1024), it will map this internally to an unprivileged port, so that Envoy Gateway doesn’t need additional privileges. It’s important to be aware of this mapping, since you may need to take it into consideration when debugging.

Testing the Configuration

You can also test the same functionality by sending traffic to the External IP. To get the external IP of the Envoy service, run:

export GATEWAY_HOST=$(kubectl get gateway/eg -o jsonpath='{.status.addresses[0].value}')

In certain environments, the load balancer may be exposed using a hostname, instead of an IP address. If so, replace ip in the above command with hostname.

Curl the example app through Envoy proxy:

curl --verbose --header "Host: www.example.com" http://$GATEWAY_HOST/get

Get the name of the Envoy service created the by the example Gateway:

export ENVOY_SERVICE=$(kubectl get svc -n envoy-gateway-system --selector=gateway.envoyproxy.io/owning-gateway-namespace=default,gateway.envoyproxy.io/owning-gateway-name=eg -o jsonpath='{.items[0].metadata.name}')

Port forward to the Envoy service:

kubectl -n envoy-gateway-system port-forward service/${ENVOY_SERVICE} 8888:80 &

Curl the example app through Envoy proxy:

curl --verbose --header "Host: www.example.com" http://localhost:8888/get

What to explore next?

In this quickstart, you have:

  • Installed Envoy Gateway
  • Deployed a backend service, and a gateway
  • Configured the gateway using Kubernetes Gateway API resources Gateway and HttpRoute to direct incoming requests over HTTP to the backend service.

Here is a suggested list of follow-on tasks to guide you in your exploration of Envoy Gateway:

Review the Tasks section for the scenario matching your use case. The Envoy Gateway tasks are organized by category: traffic management, security, extensibility, observability, and operations.

Clean-Up

Use the steps in this section to uninstall everything from the quickstart.

Delete the GatewayClass, Gateway, HTTPRoute and Example App:

kubectl delete -f https://github.com/envoyproxy/gateway/releases/download/v1.0.2/quickstart.yaml --ignore-not-found=true

Delete the Gateway API CRDs and Envoy Gateway:

helm uninstall eg -n envoy-gateway-system

Next Steps

Checkout the Developer Guide to get involved in the project.

1.2 - Traffic

This section includes Traffic Management tasks.

1.2.1 - Circuit Breakers

Envoy circuit breakers can be used to fail quickly and apply back-pressure in response to upstream service degradation.

Envoy Gateway supports the following circuit breaker thresholds:

  • Concurrent Connections: limit the connections that Envoy can establish to the upstream service. When this threshold is met, new connections will not be established, and some requests will be queued until an existing connection becomes available.
  • Concurrent Requests: limit on concurrent requests in-flight from Envoy to the upstream service. When this threshold is met, requests will be queued.
  • Pending Requests: limit the pending request queue size. When this threshold is met, overflowing requests will be terminated with a 503 status code.

Envoy’s circuit breakers are distributed: counters are not synchronized across different Envoy processes. The default Envoy and Envoy Gateway circuit breaker threshold values (1024) may be too strict for high-throughput systems.

Envoy Gateway introduces a new CRD called BackendTrafficPolicy that allows the user to describe their desired circuit breaker thresholds. This instantiated resource can be linked to a Gateway, HTTPRoute or GRPCRoute resource.

Note: There are distinct circuit breaker counters for each BackendReference in an xRoute rule. Even if a BackendTrafficPolicy targets a Gateway, each BackendReference in that gateway still has separate circuit breaker counter.

Prerequisites

Install Envoy Gateway

  • Follow the installation step from the Quickstart to install Envoy Gateway and sample resources.

Install the hey load testing tool

  • The hey CLI will be used to generate load and measure response times. Follow the installation instruction from the Hey project docs.

Test and customize circuit breaker settings

This example will simulate a degraded backend that responds within 10 seconds by adding the ?delay=10s query parameter to API calls. The hey tool will be used to generate 100 concurrent requests.

hey -n 100 -c 100 -host "www.example.com"  http://${GATEWAY_HOST}/?delay=10s
Summary:
  Total:	10.3426 secs
  Slowest:	10.3420 secs
  Fastest:	10.0664 secs
  Average:	10.2145 secs
  Requests/sec:	9.6687

  Total data:	36600 bytes
  Size/request:	366 bytes

Response time histogram:
  10.066 [1]	|■■■■
  10.094 [4]	|■■■■■■■■■■■■■■■
  10.122 [9]	|■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■
  10.149 [10]	|■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■
  10.177 [10]	|■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■
  10.204 [11]	|■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■
  10.232 [11]	|■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■
  10.259 [11]	|■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■
  10.287 [11]	|■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■
  10.314 [11]	|■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■
  10.342 [11]	|■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■

The default circuit breaker threshold (1024) is not met. As a result, requests do not overflow: all requests are proxied upstream and both Envoy and clients wait for 10s.

In order to fail fast, apply a BackendTrafficPolicy that limits concurrent requests to 10 and pending requests to 0.

cat <<EOF | kubectl apply -f -
apiVersion: gateway.envoyproxy.io/v1alpha1
kind: BackendTrafficPolicy
metadata:
  name: circuitbreaker-for-route
spec:
  targetRef:
    group: gateway.networking.k8s.io
    kind: HTTPRoute
    name: backend
    namespace: default
  circuitBreaker:
    maxPendingRequests: 0
    maxParallelRequests: 10
EOF

Execute the load simulation again.

hey -n 100 -c 100 -host "www.example.com"  http://${GATEWAY_HOST}/?delay=10s
Summary:
  Total:	10.1230 secs
  Slowest:	10.1224 secs
  Fastest:	0.0529 secs
  Average:	1.0677 secs
  Requests/sec:	9.8785

  Total data:	10940 bytes
  Size/request:	109 bytes

Response time histogram:
  0.053 [1]	|
  1.060 [89]	|■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■
  2.067 [0]	|
  3.074 [0]	|
  4.081 [0]	|
  5.088 [0]	|
  6.095 [0]	|
  7.102 [0]	|
  8.109 [0]	|
  9.115 [0]	|
  10.122 [10]	|■■■■

With the new circuit breaker settings, and due to the slowness of the backend, only the first 10 concurrent requests were proxied, while the other 90 overflowed.

  • Overflowing Requests failed fast, reducing proxy resource consumption.
  • Upstream traffic was limited, alleviating the pressure on the degraded service.

1.2.2 - Client Traffic Policy

This guide explains the usage of the ClientTrafficPolicy API.

Introduction

The ClientTrafficPolicy API allows system administrators to configure the behavior for how the Envoy Proxy server behaves with downstream clients.

Motivation

This API was added as a new policy attachment resource that can be applied to Gateway resources and it is meant to hold settings for configuring behavior of the connection between the downstream client and Envoy Proxy listener. It is the counterpart to the BackendTrafficPolicy API resource.

Quickstart

Prerequisites

  • Follow the steps from the Quickstart guide to install Envoy Gateway and the example manifest. Before proceeding, you should be able to query the example backend using HTTP.

Support TCP keepalive for downstream client

cat <<EOF | kubectl apply -f -
apiVersion: gateway.envoyproxy.io/v1alpha1
kind: ClientTrafficPolicy
metadata:
  name: enable-tcp-keepalive-policy
  namespace: default
spec:
  targetRef:
    group: gateway.networking.k8s.io
    kind: Gateway
    name: eg
    namespace: default
  tcpKeepalive:
    idleTime: 20m
    interval: 60s
    probes: 3
EOF

Verify that ClientTrafficPolicy is Accepted:

kubectl get clienttrafficpolicies.gateway.envoyproxy.io -n default

You should see the policy marked as accepted like this:

NAME                          STATUS     AGE
enable-tcp-keepalive-policy   Accepted   5s

Curl the example app through Envoy proxy once again:

curl --verbose  --header "Host: www.example.com" http://$GATEWAY_HOST/get --next --header "Host: www.example.com" http://$GATEWAY_HOST/get

You should see the output like this:

*   Trying 172.18.255.202:80...
* Connected to 172.18.255.202 (172.18.255.202) port 80 (#0)
> GET /get HTTP/1.1
> Host: www.example.com
> User-Agent: curl/8.1.2
> Accept: */*
>
< HTTP/1.1 200 OK
< content-type: application/json
< x-content-type-options: nosniff
< date: Fri, 01 Dec 2023 10:17:04 GMT
< content-length: 507
< x-envoy-upstream-service-time: 0
< server: envoy
<
{
 "path": "/get",
 "host": "www.example.com",
 "method": "GET",
 "proto": "HTTP/1.1",
 "headers": {
  "Accept": [
   "*/*"
  ],
  "User-Agent": [
   "curl/8.1.2"
  ],
  "X-Envoy-Expected-Rq-Timeout-Ms": [
   "15000"
  ],
  "X-Envoy-Internal": [
   "true"
  ],
  "X-Forwarded-For": [
   "172.18.0.2"
  ],
  "X-Forwarded-Proto": [
   "http"
  ],
  "X-Request-Id": [
   "4d0d33e8-d611-41f0-9da0-6458eec20fa5"
  ]
 },
 "namespace": "default",
 "ingress": "",
 "service": "",
 "pod": "backend-58d58f745-2zwvn"
* Connection #0 to host 172.18.255.202 left intact
}* Found bundle for host: 0x7fb9f5204ea0 [serially]
* Can not multiplex, even if we wanted to
* Re-using existing connection #0 with host 172.18.255.202
> GET /headers HTTP/1.1
> Host: www.example.com
> User-Agent: curl/8.1.2
> Accept: */*
>
< HTTP/1.1 200 OK
< content-type: application/json
< x-content-type-options: nosniff
< date: Fri, 01 Dec 2023 10:17:04 GMT
< content-length: 511
< x-envoy-upstream-service-time: 0
< server: envoy
<
{
 "path": "/headers",
 "host": "www.example.com",
 "method": "GET",
 "proto": "HTTP/1.1",
 "headers": {
  "Accept": [
   "*/*"
  ],
  "User-Agent": [
   "curl/8.1.2"
  ],
  "X-Envoy-Expected-Rq-Timeout-Ms": [
   "15000"
  ],
  "X-Envoy-Internal": [
   "true"
  ],
  "X-Forwarded-For": [
   "172.18.0.2"
  ],
  "X-Forwarded-Proto": [
   "http"
  ],
  "X-Request-Id": [
   "9a8874c0-c117-481c-9b04-933571732ca5"
  ]
 },
 "namespace": "default",
 "ingress": "",
 "service": "",
 "pod": "backend-58d58f745-2zwvn"
* Connection #0 to host 172.18.255.202 left intact
}

You can see keepalive connection marked by the output in:

* Connection #0 to host 172.18.255.202 left intact
* Re-using existing connection #0 with host 172.18.255.202

Enable Proxy Protocol for downstream client

This example configures Proxy Protocol for downstream clients.

cat <<EOF | kubectl apply -f -
apiVersion: gateway.envoyproxy.io/v1alpha1
kind: ClientTrafficPolicy
metadata:
  name: enable-proxy-protocol-policy
  namespace: default
spec:
  targetRef:
    group: gateway.networking.k8s.io
    kind: Gateway
    name: eg
    namespace: default
  enableProxyProtocol: true
EOF

Verify that ClientTrafficPolicy is Accepted:

kubectl get clienttrafficpolicies.gateway.envoyproxy.io -n default

You should see the policy marked as accepted like this:

NAME                          STATUS     AGE
enable-proxy-protocol-policy   Accepted   5s

Try the endpoint without using PROXY protocol with curl:

curl -v --header "Host: www.example.com" http://$GATEWAY_HOST/get
*   Trying 172.18.255.202:80...
* Connected to 172.18.255.202 (172.18.255.202) port 80 (#0)
> GET /get HTTP/1.1
> Host: www.example.com
> User-Agent: curl/8.1.2
> Accept: */*
>
* Recv failure: Connection reset by peer
* Closing connection 0
curl: (56) Recv failure: Connection reset by peer

Curl the example app through Envoy proxy once again, now sending HAProxy PROXY protocol header at the beginning of the connection with –haproxy-protocol flag:

curl --verbose --haproxy-protocol --header "Host: www.example.com" http://$GATEWAY_HOST/get

You should now expect 200 response status and also see that source IP was preserved in the X-Forwarded-For header.

*   Trying 172.18.255.202:80...
* Connected to 172.18.255.202 (172.18.255.202) port 80 (#0)
> GET /get HTTP/1.1
> Host: www.example.com
> User-Agent: curl/8.1.2
> Accept: */*
>
< HTTP/1.1 200 OK
< content-type: application/json
< x-content-type-options: nosniff
< date: Mon, 04 Dec 2023 21:11:43 GMT
< content-length: 510
< x-envoy-upstream-service-time: 0
< server: envoy
<
{
 "path": "/get",
 "host": "www.example.com",
 "method": "GET",
 "proto": "HTTP/1.1",
 "headers": {
  "Accept": [
   "*/*"
  ],
  "User-Agent": [
   "curl/8.1.2"
  ],
  "X-Envoy-Expected-Rq-Timeout-Ms": [
   "15000"
  ],
  "X-Envoy-Internal": [
   "true"
  ],
  "X-Forwarded-For": [
   "192.168.255.6"
  ],
  "X-Forwarded-Proto": [
   "http"
  ],
  "X-Request-Id": [
   "290e4b61-44b7-4e5c-a39c-0ec76784e897"
  ]
 },
 "namespace": "default",
 "ingress": "",
 "service": "",
 "pod": "backend-58d58f745-2zwvn"
* Connection #0 to host 172.18.255.202 left intact
}

Configure Client IP Detection

This example configures the number of additional ingress proxy hops from the right side of XFF HTTP headers to trust when determining the origin client’s IP address and determines whether or not x-forwarded-proto headers will be trusted. Refer to https://www.envoyproxy.io/docs/envoy/latest/configuration/http/http_conn_man/headers#x-forwarded-for for details.

cat <<EOF | kubectl apply -f -
apiVersion: gateway.envoyproxy.io/v1alpha1
kind: ClientTrafficPolicy
metadata:
  name: http-client-ip-detection
  namespace: default
spec:
  targetRef:
    group: gateway.networking.k8s.io
    kind: Gateway
    name: eg
    namespace: default
  clientIPDetection:
    xForwardedFor:
      numTrustedHops: 2
EOF

Verify that ClientTrafficPolicy is Accepted:

kubectl get clienttrafficpolicies.gateway.envoyproxy.io -n default

You should see the policy marked as accepted like this:

NAME                          STATUS     AGE
http-client-ip-detection   Accepted   5s

Open port-forward to the admin interface port:

kubectl port-forward deploy/${ENVOY_DEPLOYMENT} -n envoy-gateway-system 19000:19000

Curl the admin interface port to fetch the configured value for xff_num_trusted_hops:

curl -s 'http://localhost:19000/config_dump?resource=dynamic_listeners' \
  | jq -r '.configs[0].active_state.listener.default_filter_chain.filters[0].typed_config 
      | with_entries(select(.key | match("xff|remote_address|original_ip")))'

You should expect to see the following:

{
  "use_remote_address": true,
  "xff_num_trusted_hops": 2
}

Curl the example app through Envoy proxy:

curl -v http://$GATEWAY_HOST/get \
  -H "Host: www.example.com" \
  -H "X-Forwarded-Proto: https" \
  -H "X-Forwarded-For: 1.1.1.1,2.2.2.2"

You should expect 200 response status, see that X-Forwarded-Proto was preserved and X-Envoy-External-Address was set to the leftmost address in the X-Forwarded-For header:

*   Trying [::1]:8888...
* Connected to localhost (::1) port 8888
> GET /get HTTP/1.1
> Host: www.example.com
> User-Agent: curl/8.4.0
> Accept: */*
> X-Forwarded-Proto: https
> X-Forwarded-For: 1.1.1.1,2.2.2.2
> 
Handling connection for 8888
< HTTP/1.1 200 OK
< content-type: application/json
< x-content-type-options: nosniff
< date: Tue, 30 Jan 2024 15:19:22 GMT
< content-length: 535
< x-envoy-upstream-service-time: 0
< server: envoy
< 
{
 "path": "/get",
 "host": "www.example.com",
 "method": "GET",
 "proto": "HTTP/1.1",
 "headers": {
  "Accept": [
   "*/*"
  ],
  "User-Agent": [
   "curl/8.4.0"
  ],
  "X-Envoy-Expected-Rq-Timeout-Ms": [
   "15000"
  ],
  "X-Envoy-External-Address": [
   "1.1.1.1"
  ],
  "X-Forwarded-For": [
   "1.1.1.1,2.2.2.2,10.244.0.9"
  ],
  "X-Forwarded-Proto": [
   "https"
  ],
  "X-Request-Id": [
   "53ccfad7-1899-40fa-9322-ddb833aa1ac3"
  ]
 },
 "namespace": "default",
 "ingress": "",
 "service": "",
 "pod": "backend-58d58f745-8psnc"
* Connection #0 to host localhost left intact
}

Enable HTTP Request Received Timeout

This feature allows you to limit the time taken by the Envoy Proxy fleet to receive the entire request from the client, which is useful in preventing certain clients from consuming too much memory in Envoy This example configures the HTTP request timeout for the client, please check out the details here.

cat <<EOF | kubectl apply -f -
apiVersion: gateway.envoyproxy.io/v1alpha1
kind: ClientTrafficPolicy
metadata:
  name: client-timeout
spec:
  targetRef:
    group: gateway.networking.k8s.io
    kind: Gateway
    name: eg
  timeout:
    http:
      requestReceivedTimeout: 2s
EOF

Curl the example app through Envoy proxy:

curl -v http://$GATEWAY_HOST/get \
  -H "Host: www.example.com" \
  -H "Content-Length: 10000"

You should expect 428 response status after 2s:

curl -v http://$GATEWAY_HOST/get \
  -H "Host: www.example.com" \
  -H "Content-Length: 10000"
*   Trying 172.18.255.200:80...
* Connected to 172.18.255.200 (172.18.255.200) port 80
> GET /get HTTP/1.1
> Host: www.example.com
> User-Agent: curl/8.4.0
> Accept: */*
> Content-Length: 10000
>
< HTTP/1.1 408 Request Timeout
< content-length: 15
< content-type: text/plain
< date: Tue, 27 Feb 2024 07:38:27 GMT
< connection: close
<
* Closing connection
request timeout

1.2.3 - Fault Injection

Envoy fault injection can be used to inject delays and abort requests to mimic failure scenarios such as service failures and overloads.

Envoy Gateway supports the following fault scenarios:

  • delay fault: inject a custom fixed delay into the request with a certain probability to simulate delay failures.
  • abort fault: inject a custom response code into the response with a certain probability to simulate abort failures.

Envoy Gateway introduces a new CRD called BackendTrafficPolicy that allows the user to describe their desired fault scenarios. This instantiated resource can be linked to a Gateway, HTTPRoute or GRPCRoute resource.

Prerequisites

Follow the steps from the Quickstart guide to install Envoy Gateway and the example manifest. For GRPC - follow the steps from the GRPC Routing example. Before proceeding, you should be able to query the example backend using HTTP or GRPC.

Install the hey load testing tool

  • The hey CLI will be used to generate load and measure response times. Follow the installation instruction from the Hey project docs.

Configuration

Allow requests with a valid faultInjection by creating an BackendTrafficPolicy and attaching it to the example HTTPRoute or GRPCRoute.

HTTPRoute

cat <<EOF | kubectl apply -f -
apiVersion: gateway.envoyproxy.io/v1alpha1
kind: BackendTrafficPolicy
metadata:
  name: fault-injection-50-percent-abort
spec:
  targetRef:
    group: gateway.networking.k8s.io
    kind: HTTPRoute
    name: foo
  faultInjection:
    abort:
      httpStatus: 501
      percentage: 50
---
apiVersion: gateway.envoyproxy.io/v1alpha1
kind: BackendTrafficPolicy
metadata:
  name: fault-injection-delay
spec:
  targetRef:
    group: gateway.networking.k8s.io
    kind: HTTPRoute
    name: bar
  faultInjection:
    delay:
      fixedDelay: 2s
---
apiVersion: gateway.networking.k8s.io/v1
kind: HTTPRoute
metadata:
  name: foo
spec:
  parentRefs:
  - name: eg
  hostnames:
  - "www.example.com"
  rules:
  - backendRefs:
    - group: ""
      kind: Service
      name: backend
      port: 3000
      weight: 1
    matches:
    - path:
        type: PathPrefix
        value: /foo
---
apiVersion: gateway.networking.k8s.io/v1
kind: HTTPRoute
metadata:
  name: bar
spec:
  parentRefs:
  - name: eg
  hostnames:
  - "www.example.com"
  rules:
  - backendRefs:
    - group: ""
      kind: Service
      name: backend
      port: 3000
      weight: 1
    matches:
    - path:
        type: PathPrefix
        value: /bar

EOF

Two HTTPRoute has been created, one for /foo and another for /bar. fault-injection-abort BackendTrafficPolicy has been created and targeted HTTPRoute foo to abort requests for /foo. fault-injection-delay BackendTrafficPolicy has been created and targeted HTTPRoute foo to delay 2s requests for /bar.

Verify the HTTPRoute configuration and status:

kubectl get httproute/foo -o yaml
kubectl get httproute/bar -o yaml

Verify the BackendTrafficPolicy configuration:

kubectl get backendtrafficpolicy/fault-injection-50-percent-abort -o yaml
kubectl get backendtrafficpolicy/fault-injection-delay -o yaml

GRPCRoute

cat <<EOF | kubectl apply -f -
apiVersion: gateway.envoyproxy.io/v1alpha1
kind: BackendTrafficPolicy
metadata:
  name: fault-injection-abort
spec:
  targetRef:
    group: gateway.networking.k8s.io
    kind: GRPCRoute
    name: yages
  faultInjection:
    abort:
      grpcStatus: 14
---
apiVersion: gateway.networking.k8s.io/v1alpha2
kind: GRPCRoute
metadata:
  name: yages
  labels:
    example: grpc-routing
spec:
  parentRefs:
  - name: example-gateway
  hostnames:
  - "grpc-example.com"
  rules:
  - backendRefs:
    - group: ""
      kind: Service
      name: yages
      port: 9000
      weight: 1
EOF

A BackendTrafficPolicy has been created and targeted GRPCRoute yages to abort requests for yages service..

Verify the GRPCRoute configuration and status:

kubectl get grpcroute/yages -o yaml

Verify the SecurityPolicy configuration:

kubectl get backendtrafficpolicy/fault-injection-abort -o yaml

Testing

Ensure the GATEWAY_HOST environment variable from the Quickstart guide is set. If not, follow the Quickstart instructions to set the variable.

echo $GATEWAY_HOST

HTTPRoute

Verify that requests to foo route are aborted.

hey -n 1000 -c 100 -host "www.example.com"  http://${GATEWAY_HOST}/foo
Status code distribution:
  [200]	501 responses
  [501]	499 responses

Verify that requests to bar route are delayed.

hey -n 1000 -c 100 -host "www.example.com"  http://${GATEWAY_HOST}/bar
Summary:
  Total:	20.1493 secs
  Slowest:	2.1020 secs
  Fastest:	1.9940 secs
  Average:	2.0123 secs
  Requests/sec:	49.6295

  Total data:	557000 bytes
  Size/request:	557 bytes

Response time histogram:
  1.994 [1]	|
  2.005 [475]	|■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■
  2.016 [419]	|■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■
  2.026 [5]	|
  2.037 [0]	|
  2.048 [0]	|
  2.059 [30]	|■■■
  2.070 [0]	|
  2.080 [0]	|
  2.091 [11]	|■
  2.102 [59]	|■■■■■

GRPCRoute

Verify that requests to yagesservice are aborted.

grpcurl -plaintext -authority=grpc-example.com ${GATEWAY_HOST}:80 yages.Echo/Ping

You should see the below response

Error invoking method "yages.Echo/Ping": rpc error: code = Unavailable desc = failed to query for service descriptor "yages.Echo": fault filter abort

Clean-Up

Follow the steps from the Quickstart guide to uninstall Envoy Gateway and the example manifest.

Delete the BackendTrafficPolicy:

kubectl delete BackendTrafficPolicy/fault-injection-abort

1.2.4 - Gateway Address

The Gateway API provides an optional Addresses field through which Envoy Gateway can set addresses for Envoy Proxy Service. Depending on the Service Type, the addresses of gateway can be used as:

Prerequisites

Follow the steps from the Quickstart to install Envoy Gateway and the example manifest.

External IPs

Using the addresses in Gateway.Spec.Addresses as the External IPs of Envoy Proxy Service, this will require the address to be of type IPAddress and the ServiceType to be of LoadBalancer or NodePort.

The Envoy Gateway deploys Envoy Proxy Service as LoadBalancer by default, so you can set the address of the Gateway directly (the address settings here are for reference only):

kubectl patch gateway eg --type=json --patch '
- op: add
  path: /spec/addresses
  value:
   - type: IPAddress
     value: 1.2.3.4
'

Verify the Gateway status:

kubectl get gateway
NAME   CLASS   ADDRESS   PROGRAMMED   AGE
eg     eg      1.2.3.4   True         14m

Verify the Envoy Proxy Service status:

kubectl get service -n envoy-gateway-system
NAME                            TYPE           CLUSTER-IP      EXTERNAL-IP   PORT(S)        AGE
envoy-default-eg-64656661       LoadBalancer   10.96.236.219   1.2.3.4       80:31017/TCP   15m
envoy-gateway                   ClusterIP      10.96.192.76    <none>        18000/TCP      15m
envoy-gateway-metrics-service   ClusterIP      10.96.124.73    <none>        8443/TCP       15m

Note: If the Gateway.Spec.Addresses is explicitly set, it will be the only addresses that populates the Gateway status.

Cluster IP

Using the addresses in Gateway.Spec.Addresses as the Cluster IP of Envoy Proxy Service, this will require the address to be of type IPAddress and the ServiceType to be of ClusterIP.

1.2.5 - Gateway API Support

As mentioned in the system design document, Envoy Gateway’s managed data plane is configured dynamically through Kubernetes resources, primarily Gateway API objects. Envoy Gateway supports configuration using the following Gateway API resources.

GatewayClass

A GatewayClass represents a “class” of gateways, i.e. which Gateways should be managed by Envoy Gateway. Envoy Gateway supports managing a single GatewayClass resource that matches its configured controllerName and follows Gateway API guidelines for resolving conflicts when multiple GatewayClasses exist with a matching controllerName.

Note: If specifying GatewayClass parameters reference, it must refer to an EnvoyProxy resource.

Gateway

When a Gateway resource is created that references the managed GatewayClass, Envoy Gateway will create and manage a new Envoy Proxy deployment. Gateway API resources that reference this Gateway will configure this managed Envoy Proxy deployment.

HTTPRoute

A HTTPRoute configures routing of HTTP traffic through one or more Gateways. The following HTTPRoute filters are supported by Envoy Gateway:

  • requestHeaderModifier: RequestHeaderModifiers can be used to modify or add request headers before the request is proxied to its destination.
  • responseHeaderModifier: ResponseHeaderModifiers can be used to modify or add response headers before the response is sent back to the client.
  • requestMirror: RequestMirrors configure destinations where the requests should also be mirrored to. Responses to mirrored requests will be ignored.
  • requestRedirect: RequestRedirects configure policied for how requests that match the HTTPRoute should be modified and then redirected.
  • urlRewrite: UrlRewrites allow for modification of the request’s hostname and path before it is proxied to its destination.
  • extensionRef: ExtensionRefs are used by Envoy Gateway to implement extended filters. Currently, Envoy Gateway supports rate limiting and request authentication filters. For more information about these filters, refer to the rate limiting and request authentication documentation.

Notes:

  • The only BackendRef kind supported by Envoy Gateway is a Service. Routing traffic to other destinations such as arbitrary URLs is not possible.
  • The filters field within HTTPBackendRef is not supported.

TCPRoute

A TCPRoute configures routing of raw TCP traffic through one or more Gateways. Traffic can be forwarded to the desired BackendRefs based on a TCP port number.

Note: A TCPRoute only supports proxying in non-transparent mode, i.e. the backend will see the source IP and port of the Envoy Proxy instance instead of the client.

UDPRoute

A UDPRoute configures routing of raw UDP traffic through one or more Gateways. Traffic can be forwarded to the desired BackendRefs based on a UDP port number.

Note: Similar to TCPRoutes, UDPRoutes only support proxying in non-transparent mode i.e. the backend will see the source IP and port of the Envoy Proxy instance instead of the client.

GRPCRoute

A GRPCRoute configures routing of gRPC requests through one or more Gateways. They offer request matching by hostname, gRPC service, gRPC method, or HTTP/2 Header. Envoy Gateway supports the following filters on GRPCRoutes to provide additional traffic processing:

  • requestHeaderModifier: RequestHeaderModifiers can be used to modify or add request headers before the request is proxied to its destination.
  • responseHeaderModifier: ResponseHeaderModifiers can be used to modify or add response headers before the response is sent back to the client.
  • requestMirror: RequestMirrors configure destinations where the requests should also be mirrored to. Responses to mirrored requests will be ignored.

Notes:

  • The only BackendRef kind supported by Envoy Gateway is a Service. Routing traffic to other destinations such as arbitrary URLs is not currently possible.
  • The filters field within HTTPBackendRef is not supported.

TLSRoute

A TLSRoute configures routing of TCP traffic through one or more Gateways. However, unlike TCPRoutes, TLSRoutes can match against TLS-specific metadata.

ReferenceGrant

A ReferenceGrant is used to allow a resource to reference another resource in a different namespace. Normally an HTTPRoute created in namespace foo is not allowed to reference a Service in namespace bar. A ReferenceGrant permits these types of cross-namespace references. Envoy Gateway supports the following ReferenceGrant use-cases:

  • Allowing an HTTPRoute, GRPCRoute, TLSRoute, UDPRoute, or TCPRoute to reference a Service in a different namespace.
  • Allowing an HTTPRoute’s requestMirror filter to include a BackendRef that references a Service in a different namespace.
  • Allowing a Gateway’s SecretObjectReference to reference a secret in a different namespace.

1.2.6 - Global Rate Limit

Rate limit is a feature that allows the user to limit the number of incoming requests to a predefined value based on attributes within the traffic flow.

Here are some reasons why you may want to implement Rate limits

  • To prevent malicious activity such as DDoS attacks.
  • To prevent applications and its resources (such as a database) from getting overloaded.
  • To create API limits based on user entitlements.

Envoy Gateway supports two types of rate limiting: Global rate limiting and Local rate limiting.

Global rate limiting applies a shared rate limit to the traffic flowing through all the instances of Envoy proxies where it is configured. i.e. if the data plane has 2 replicas of Envoy running, and the rate limit is 10 requests/second, this limit is shared and will be hit if 5 requests pass through the first replica and 5 requests pass through the second replica within the same second.

Envoy Gateway introduces a new CRD called BackendTrafficPolicy that allows the user to describe their rate limit intent. This instantiated resource can be linked to a Gateway, HTTPRoute or GRPCRoute resource.

Note: Limit is applied per route. Even if a BackendTrafficPolicy targets a gateway, each route in that gateway still has a separate rate limit bucket. For example, if a gateway has 2 routes, and the limit is 100r/s, then each route has its own 100r/s rate limit bucket.

Prerequisites

Install Envoy Gateway

  • Follow the steps from the Quickstart to install Envoy Gateway and the HTTPRoute example manifest. Before proceeding, you should be able to query the example backend using HTTP.

Install Redis

  • The global rate limit feature is based on Envoy Ratelimit which requires a Redis instance as its caching layer. Lets install a Redis deployment in the redis-system namespce.
cat <<EOF | kubectl apply -f -
kind: Namespace
apiVersion: v1
metadata:
  name: redis-system 
---
apiVersion: apps/v1
kind: Deployment
metadata:
  name: redis
  namespace: redis-system
  labels:
    app: redis
spec:
  replicas: 1
  selector:
    matchLabels:
      app: redis
  template:
    metadata:
      labels:
        app: redis
    spec:
      containers:
      - image: redis:6.0.6
        imagePullPolicy: IfNotPresent
        name: redis
        resources:
          limits:
            cpu: 1500m
            memory: 512Mi
          requests:
            cpu: 200m
            memory: 256Mi
---
apiVersion: v1
kind: Service
metadata:
  name: redis
  namespace: redis-system 
  labels:
    app: redis
  annotations:
spec:
  ports:
  - name: redis
    port: 6379
    protocol: TCP
    targetPort: 6379
  selector:
    app: redis
---

EOF

Enable Global Rate limit in Envoy Gateway

  • The default installation of Envoy Gateway installs a default EnvoyGateway configuration and attaches it using a ConfigMap. In the next step, we will update this resource to enable rate limit in Envoy Gateway as well as configure the URL for the Redis instance used for Global rate limiting.
cat <<EOF | kubectl apply -f -
apiVersion: v1
kind: ConfigMap
metadata:
  name: envoy-gateway-config
  namespace: envoy-gateway-system
data:
  envoy-gateway.yaml: |
    apiVersion: gateway.envoyproxy.io/v1alpha1
    kind: EnvoyGateway
    provider:
      type: Kubernetes
    gateway:
      controllerName: gateway.envoyproxy.io/gatewayclass-controller
    rateLimit:
      backend:
        type: Redis
        redis:
          url: redis.redis-system.svc.cluster.local:6379
EOF
  • After updating the ConfigMap, you will need to restart the envoy-gateway deployment so the configuration kicks in
kubectl rollout restart deployment envoy-gateway -n envoy-gateway-system

Rate Limit Specific User

Here is an example of a rate limit implemented by the application developer to limit a specific user by matching on a custom x-user-id header with a value set to one.

cat <<EOF | kubectl apply -f -
apiVersion: gateway.envoyproxy.io/v1alpha1
kind: BackendTrafficPolicy 
metadata:
  name: policy-httproute
spec:
  targetRef:
    group: gateway.networking.k8s.io
    kind: HTTPRoute
    name: http-ratelimit
    namespace: default
  rateLimit:
    type: Global
    global:
      rules:
      - clientSelectors:
        - headers:
          - name: x-user-id
            value: one
        limit:
          requests: 3
          unit: Hour
EOF

HTTPRoute

cat <<EOF | kubectl apply -f -
apiVersion: gateway.networking.k8s.io/v1
kind: HTTPRoute
metadata:
  name: http-ratelimit
spec:
  parentRefs:
  - name: eg
  hostnames:
  - ratelimit.example 
  rules:
  - matches:
    - path:
        type: PathPrefix
        value: /
    backendRefs:
    - group: ""
      kind: Service
      name: backend
      port: 3000
EOF

The HTTPRoute status should indicate that it has been accepted and is bound to the example Gateway.

kubectl get httproute/http-ratelimit -o yaml

Get the Gateway’s address:

export GATEWAY_HOST=$(kubectl get gateway/eg -o jsonpath='{.status.addresses[0].value}')

Let’s query ratelimit.example/get 4 times. We should receive a 200 response from the example Gateway for the first 3 requests and then receive a 429 status code for the 4th request since the limit is set at 3 requests/Hour for the request which contains the header x-user-id and value one.

for i in {1..4}; do curl -I --header "Host: ratelimit.example" --header "x-user-id: one" http://${GATEWAY_HOST}/get ; sleep 1; done
HTTP/1.1 200 OK
content-type: application/json
x-content-type-options: nosniff
date: Wed, 08 Feb 2023 02:33:31 GMT
content-length: 460
x-envoy-upstream-service-time: 4
server: envoy

HTTP/1.1 200 OK
content-type: application/json
x-content-type-options: nosniff
date: Wed, 08 Feb 2023 02:33:32 GMT
content-length: 460
x-envoy-upstream-service-time: 2
server: envoy

HTTP/1.1 200 OK
content-type: application/json
x-content-type-options: nosniff
date: Wed, 08 Feb 2023 02:33:33 GMT
content-length: 460
x-envoy-upstream-service-time: 0
server: envoy

HTTP/1.1 429 Too Many Requests
x-envoy-ratelimited: true
date: Wed, 08 Feb 2023 02:33:34 GMT
server: envoy
transfer-encoding: chunked

You should be able to send requests with the x-user-id header and a different value and receive successful responses from the server.

for i in {1..4}; do curl -I --header "Host: ratelimit.example" --header "x-user-id: two" http://${GATEWAY_HOST}/get ; sleep 1; done
HTTP/1.1 200 OK
content-type: application/json
x-content-type-options: nosniff
date: Wed, 08 Feb 2023 02:34:36 GMT
content-length: 460
x-envoy-upstream-service-time: 0
server: envoy

HTTP/1.1 200 OK
content-type: application/json
x-content-type-options: nosniff
date: Wed, 08 Feb 2023 02:34:37 GMT
content-length: 460
x-envoy-upstream-service-time: 0
server: envoy

HTTP/1.1 200 OK
content-type: application/json
x-content-type-options: nosniff
date: Wed, 08 Feb 2023 02:34:38 GMT
content-length: 460
x-envoy-upstream-service-time: 0
server: envoy

HTTP/1.1 200 OK
content-type: application/json
x-content-type-options: nosniff
date: Wed, 08 Feb 2023 02:34:39 GMT
content-length: 460
x-envoy-upstream-service-time: 0
server: envoy

Rate Limit Distinct Users

Here is an example of a rate limit implemented by the application developer to limit distinct users who can be differentiated based on the value in the x-user-id header. Here, user one (recognised from the traffic flow using the header x-user-id and value one) will be rate limited at 3 requests/hour and so will user two (recognised from the traffic flow using the header x-user-id and value two).

cat <<EOF | kubectl apply -f -
apiVersion: gateway.envoyproxy.io/v1alpha1
kind: BackendTrafficPolicy 
metadata:
  name: policy-httproute
spec:
  targetRef:
    group: gateway.networking.k8s.io
    kind: HTTPRoute
    name: http-ratelimit
    namespace: default
  rateLimit:
    type: Global
    global:
      rules:
      - clientSelectors:
        - headers:
          - type: Distinct
            name: x-user-id
        limit:
          requests: 3
          unit: Hour
EOF

HTTPRoute

cat <<EOF | kubectl apply -f -
apiVersion: gateway.networking.k8s.io/v1
kind: HTTPRoute
metadata:
  name: http-ratelimit
spec:
  parentRefs:
  - name: eg
  hostnames:
  - ratelimit.example 
  rules:
  - matches:
    - path:
        type: PathPrefix
        value: /
    backendRefs:
    - group: ""
      kind: Service
      name: backend
      port: 3000
EOF

Lets run the same command again with the header x-user-id and value one set in the request. We should the first 3 requests succeeding and the 4th request being rate limited.

for i in {1..4}; do curl -I --header "Host: ratelimit.example" --header "x-user-id: one" http://${GATEWAY_HOST}/get ; sleep 1; done
HTTP/1.1 200 OK
content-type: application/json
x-content-type-options: nosniff
date: Wed, 08 Feb 2023 02:33:31 GMT
content-length: 460
x-envoy-upstream-service-time: 4
server: envoy

HTTP/1.1 200 OK
content-type: application/json
x-content-type-options: nosniff
date: Wed, 08 Feb 2023 02:33:32 GMT
content-length: 460
x-envoy-upstream-service-time: 2
server: envoy

HTTP/1.1 200 OK
content-type: application/json
x-content-type-options: nosniff
date: Wed, 08 Feb 2023 02:33:33 GMT
content-length: 460
x-envoy-upstream-service-time: 0
server: envoy

HTTP/1.1 429 Too Many Requests
x-envoy-ratelimited: true
date: Wed, 08 Feb 2023 02:33:34 GMT
server: envoy
transfer-encoding: chunked

You should see the same behavior when the value for header x-user-id is set to two and 4 requests are sent.

for i in {1..4}; do curl -I --header "Host: ratelimit.example" --header "x-user-id: two" http://${GATEWAY_HOST}/get ; sleep 1; done
HTTP/1.1 200 OK
content-type: application/json
x-content-type-options: nosniff
date: Wed, 08 Feb 2023 02:33:31 GMT
content-length: 460
x-envoy-upstream-service-time: 4
server: envoy

HTTP/1.1 200 OK
content-type: application/json
x-content-type-options: nosniff
date: Wed, 08 Feb 2023 02:33:32 GMT
content-length: 460
x-envoy-upstream-service-time: 2
server: envoy

HTTP/1.1 200 OK
content-type: application/json
x-content-type-options: nosniff
date: Wed, 08 Feb 2023 02:33:33 GMT
content-length: 460
x-envoy-upstream-service-time: 0
server: envoy

HTTP/1.1 429 Too Many Requests
x-envoy-ratelimited: true
date: Wed, 08 Feb 2023 02:33:34 GMT
server: envoy
transfer-encoding: chunked

Rate Limit All Requests

This example shows you how to rate limit all requests matching the HTTPRoute rule at 3 requests/Hour by leaving the clientSelectors field unset.

cat <<EOF | kubectl apply -f -
apiVersion: gateway.envoyproxy.io/v1alpha1
kind: BackendTrafficPolicy 
metadata:
  name: policy-httproute
spec:
  targetRef:
    group: gateway.networking.k8s.io
    kind: HTTPRoute
    name: http-ratelimit
    namespace: default
  rateLimit:
    type: Global
    global:
      rules:
      - limit:
          requests: 3
          unit: Hour
EOF

HTTPRoute

cat <<EOF | kubectl apply -f -
apiVersion: gateway.networking.k8s.io/v1
kind: HTTPRoute
metadata:
  name: http-ratelimit
spec:
  parentRefs:
  - name: eg
  hostnames:
  - ratelimit.example 
  rules:
  - matches:
    - path:
        type: PathPrefix
        value: /
    backendRefs:
    - group: ""
      kind: Service
      name: backend
      port: 3000
EOF
for i in {1..4}; do curl -I --header "Host: ratelimit.example" http://${GATEWAY_HOST}/get ; sleep 1; done
HTTP/1.1 200 OK
content-type: application/json
x-content-type-options: nosniff
date: Wed, 08 Feb 2023 02:33:31 GMT
content-length: 460
x-envoy-upstream-service-time: 4
server: envoy

HTTP/1.1 200 OK
content-type: application/json
x-content-type-options: nosniff
date: Wed, 08 Feb 2023 02:33:32 GMT
content-length: 460
x-envoy-upstream-service-time: 2
server: envoy

HTTP/1.1 200 OK
content-type: application/json
x-content-type-options: nosniff
date: Wed, 08 Feb 2023 02:33:33 GMT
content-length: 460
x-envoy-upstream-service-time: 0
server: envoy

HTTP/1.1 429 Too Many Requests
x-envoy-ratelimited: true
date: Wed, 08 Feb 2023 02:33:34 GMT
server: envoy
transfer-encoding: chunked

Rate Limit Client IP Addresses

Here is an example of a rate limit implemented by the application developer to limit distinct users who can be differentiated based on their IP address (also reflected in the X-Forwarded-For header).

Note: EG supports two kinds of rate limit for the IP address: Exact and Distinct.

  • Exact means that all IP addresses within the specified Source IP CIDR share the same rate limit bucket.
  • Distinct means that each IP address within the specified Source IP CIDR has its own rate limit bucket.
cat <<EOF | kubectl apply -f -
apiVersion: gateway.envoyproxy.io/v1alpha1
kind: BackendTrafficPolicy 
metadata:
  name: policy-httproute
spec:
  targetRef:
    group: gateway.networking.k8s.io
    kind: HTTPRoute
    name: http-ratelimit 
    namespace: default
  rateLimit:
    type: Global
    global:
      rules:
      - clientSelectors:
        - sourceCIDR: 
            value: 0.0.0.0/0
            type: Distinct
        limit:
          requests: 3
          unit: Hour
---
apiVersion: gateway.networking.k8s.io/v1
kind: HTTPRoute
metadata:
  name: http-ratelimit
spec:
  parentRefs:
  - name: eg
  hostnames:
  - ratelimit.example 
  rules:
  - matches:
    - path:
        type: PathPrefix
        value: /
    backendRefs:
    - group: ""
      kind: Service
      name: backend
      port: 3000
EOF
for i in {1..4}; do curl -I --header "Host: ratelimit.example" http://${GATEWAY_HOST}/get ; sleep 1; done
HTTP/1.1 200 OK
content-type: application/json
x-content-type-options: nosniff
date: Tue, 28 Mar 2023 08:28:45 GMT
content-length: 512
x-envoy-upstream-service-time: 0
server: envoy

HTTP/1.1 200 OK
content-type: application/json
x-content-type-options: nosniff
date: Tue, 28 Mar 2023 08:28:46 GMT
content-length: 512
x-envoy-upstream-service-time: 0
server: envoy

HTTP/1.1 200 OK
content-type: application/json
x-content-type-options: nosniff
date: Tue, 28 Mar 2023 08:28:48 GMT
content-length: 512
x-envoy-upstream-service-time: 0
server: envoy

HTTP/1.1 429 Too Many Requests
x-envoy-ratelimited: true
date: Tue, 28 Mar 2023 08:28:48 GMT
server: envoy
transfer-encoding: chunked

Rate Limit Jwt Claims

Here is an example of a rate limit implemented by the application developer to limit distinct users who can be differentiated based on the value of the Jwt claims carried.

cat <<EOF | kubectl apply -f -
apiVersion: gateway.envoyproxy.io/v1alpha1
kind: SecurityPolicy
metadata:
  name: jwt-example
spec:
  targetRef:
    group: gateway.networking.k8s.io
    kind: HTTPRoute
    name: example
  jwt:
    providers:
    - name: example
      remoteJWKS:
        uri: https://raw.githubusercontent.com/envoyproxy/gateway/main/examples/kubernetes/jwt/jwks.json
      claimToHeaders:
      - claim: name
        header: x-claim-name
---
apiVersion: gateway.envoyproxy.io/v1alpha1
kind: BackendTrafficPolicy 
metadata:
  name: policy-httproute
spec:
  targetRef:
    group: gateway.networking.k8s.io
    kind: HTTPRoute
    name: example 
  rateLimit:
    type: Global
    global:
      rules:
      - clientSelectors:
        - headers:
          - name: x-claim-name
            value: John Doe
        limit:
          requests: 3
          unit: Hour
---
apiVersion: gateway.networking.k8s.io/v1
kind: HTTPRoute
metadata:
  name: example
spec:
  parentRefs:
  - name: eg
  hostnames:
  - ratelimit.example
  rules:
  - backendRefs:
    - group: ""
      kind: Service
      name: backend
      port: 3000
      weight: 1
    matches:
    - path:
        type: PathPrefix
        value: /foo
EOF

Get the JWT used for testing request authentication:

TOKEN=$(curl https://raw.githubusercontent.com/envoyproxy/gateway/main/examples/kubernetes/jwt/test.jwt -s) && echo "$TOKEN" | cut -d '.' -f2 - | base64 --decode
TOKEN1=$(curl https://raw.githubusercontent.com/envoyproxy/gateway/main/examples/kubernetes/jwt/with-different-claim.jwt -s) && echo "$TOKEN1" | cut -d '.' -f2 - | base64 --decode

Rate limit by carrying TOKEN

for i in {1..4}; do curl -I --header "Host: ratelimit.example" --header "Authorization: Bearer $TOKEN" http://${GATEWAY_HOST}/foo ; sleep 1; done
HTTP/1.1 200 OK
content-type: application/json
x-content-type-options: nosniff
date: Mon, 12 Jun 2023 12:00:25 GMT
content-length: 561
x-envoy-upstream-service-time: 0
server: envoy


HTTP/1.1 200 OK
content-type: application/json
x-content-type-options: nosniff
date: Mon, 12 Jun 2023 12:00:26 GMT
content-length: 561
x-envoy-upstream-service-time: 0
server: envoy


HTTP/1.1 200 OK
content-type: application/json
x-content-type-options: nosniff
date: Mon, 12 Jun 2023 12:00:27 GMT
content-length: 561
x-envoy-upstream-service-time: 0
server: envoy


HTTP/1.1 429 Too Many Requests
x-envoy-ratelimited: true
date: Mon, 12 Jun 2023 12:00:28 GMT
server: envoy
transfer-encoding: chunked

No Rate Limit by carrying TOKEN1

for i in {1..4}; do curl -I --header "Host: ratelimit.example" --header "Authorization: Bearer $TOKEN1" http://${GATEWAY_HOST}/foo ; sleep 1; done
HTTP/1.1 200 OK
content-type: application/json
x-content-type-options: nosniff
date: Mon, 12 Jun 2023 12:02:34 GMT
content-length: 556
x-envoy-upstream-service-time: 0
server: envoy

HTTP/1.1 200 OK
content-type: application/json
x-content-type-options: nosniff
date: Mon, 12 Jun 2023 12:02:35 GMT
content-length: 556
x-envoy-upstream-service-time: 0
server: envoy

HTTP/1.1 200 OK
content-type: application/json
x-content-type-options: nosniff
date: Mon, 12 Jun 2023 12:02:36 GMT
content-length: 556
x-envoy-upstream-service-time: 1
server: envoy

HTTP/1.1 200 OK
content-type: application/json
x-content-type-options: nosniff
date: Mon, 12 Jun 2023 12:02:37 GMT
content-length: 556
x-envoy-upstream-service-time: 0
server: envoy

(Optional) Editing Kubernetes Resources settings for the Rate Limit Service

  • The default installation of Envoy Gateway installs a default EnvoyGateway configuration and provides the initial rate limit kubernetes resources settings. such as replicas is 1, requests resources cpu is 100m, memory is 512Mi. the others like container image, securityContext, env and pod annotations and securityContext can be modified by modifying the ConfigMap.

  • tls.certificateRef set the client certificate for redis server TLS connections.

cat <<EOF | kubectl apply -f -
apiVersion: v1
kind: ConfigMap
metadata:
  name: envoy-gateway-config
  namespace: envoy-gateway-system
data:
  envoy-gateway.yaml: |
    apiVersion: gateway.envoyproxy.io/v1alpha1
    kind: EnvoyGateway
    provider:
      type: Kubernetes
      kubernetes:
        rateLimitDeployment:
          replicas: 1
          container:
            image: envoyproxy/ratelimit:master
            env:
            - name: CACHE_KEY_PREFIX
              value: "eg:rl:"
            resources:
              requests:
                cpu: 100m
                memory: 512Mi
            securityContext:
              runAsUser: 2000
              allowPrivilegeEscalation: false
          pod:
            annotations:
              key1: val1
              key2: val2
            securityContext:
              runAsUser: 1000
              runAsGroup: 3000
              fsGroup: 2000
              fsGroupChangePolicy: "OnRootMismatch"
    gateway:
      controllerName: gateway.envoyproxy.io/gatewayclass-controller
    rateLimit:
      backend:
        type: Redis
        redis:
          url: redis.redis-system.svc.cluster.local:6379
          tls:
            certificateRef:
              name: ratelimit-cert
EOF
  • After updating the ConfigMap, you will need to restart the envoy-gateway deployment so the configuration kicks in
kubectl rollout restart deployment envoy-gateway -n envoy-gateway-system

1.2.7 - GRPC Routing

The GRPCRoute resource allows users to configure gRPC routing by matching HTTP/2 traffic and forwarding it to backend gRPC servers. To learn more about gRPC routing, refer to the Gateway API documentation.

Prerequisites

Follow the steps from the Quickstart guide to install Envoy Gateway and the example manifest. Before proceeding, you should be able to query the example backend using HTTP.

Installation

Install the gRPC routing example resources:

kubectl apply -f https://raw.githubusercontent.com/envoyproxy/gateway/latest/examples/kubernetes/grpc-routing.yaml

The manifest installs a GatewayClass, Gateway, a Deployment, a Service, and a GRPCRoute resource. The GatewayClass is a cluster-scoped resource that represents a class of Gateways that can be instantiated.

Note: Envoy Gateway is configured by default to manage a GatewayClass with controllerName: gateway.envoyproxy.io/gatewayclass-controller.

Verification

Check the status of the GatewayClass:

kubectl get gc --selector=example=grpc-routing

The status should reflect “Accepted=True”, indicating Envoy Gateway is managing the GatewayClass.

A Gateway represents configuration of infrastructure. When a Gateway is created, Envoy proxy infrastructure is provisioned or configured by Envoy Gateway. The gatewayClassName defines the name of a GatewayClass used by this Gateway. Check the status of the Gateway:

kubectl get gateways --selector=example=grpc-routing

The status should reflect “Ready=True”, indicating the Envoy proxy infrastructure has been provisioned. The status also provides the address of the Gateway. This address is used later in the guide to test connectivity to proxied backend services.

Check the status of the GRPCRoute:

kubectl get grpcroutes --selector=example=grpc-routing -o yaml

The status for the GRPCRoute should surface “Accepted=True” and a parentRef that references the example Gateway. The example-route matches any traffic for “grpc-example.com” and forwards it to the “yages” Service.

Testing the Configuration

Before testing GRPC routing to the yages backend, get the Gateway’s address.

export GATEWAY_HOST=$(kubectl get gateway/example-gateway -o jsonpath='{.status.addresses[0].value}')

Test GRPC routing to the yages backend using the grpcurl command.

grpcurl -plaintext -authority=grpc-example.com ${GATEWAY_HOST}:80 yages.Echo/Ping

You should see the below response

{
  "text": "pong"
}

Envoy Gateway also supports gRPC-Web requests for this configuration. The below curl command can be used to send a grpc-Web request with over HTTP/2. You should receive the same response seen in the previous command.

The data in the body AAAAAAA= is a base64 encoded representation of an empty message (data length 0) that the Ping RPC accepts.

curl --http2-prior-knowledge -s ${GATEWAY_HOST}:80/yages.Echo/Ping -H 'Host: grpc-example.com'   -H 'Content-Type: application/grpc-web-text'   -H 'Accept: application/grpc-web-text' -XPOST -d'AAAAAAA=' | base64 -d

GRPCRoute Match

The matches field can be used to restrict the route to a specific set of requests based on GRPC’s service and/or method names. It supports two match types: Exact and RegularExpression.

Exact

Exact match is the default match type.

The following example shows how to match a request based on the service and method names for grpc.reflection.v1alpha.ServerReflection/ServerReflectionInfo, as well as a match for all services with a method name Ping which matches yages.Echo/Ping in our deployment.

cat <<EOF | kubectl apply -f -
apiVersion: gateway.networking.k8s.io/v1alpha2
kind: GRPCRoute
metadata:
  name: yages
  labels:
    example: grpc-routing
spec:
  parentRefs:
    - name: example-gateway
  hostnames:
    - "grpc-example.com"
  rules:
    - matches:
      - method:
          method: ServerReflectionInfo
          service: grpc.reflection.v1alpha.ServerReflection
      - method:
          method: Ping
      backendRefs:
        - group: ""
          kind: Service
          name: yages
          port: 9000
          weight: 1
EOF

Verify the GRPCRoute status:

kubectl get grpcroutes --selector=example=grpc-routing -o yaml

Test GRPC routing to the yages backend using the grpcurl command.

grpcurl -plaintext -authority=grpc-example.com ${GATEWAY_HOST}:80 yages.Echo/Ping

RegularExpression

The following example shows how to match a request based on the service and method names with match type RegularExpression. It matches all the services and methods with pattern /.*.Echo/Pin.+, which matches yages.Echo/Ping in our deployment.

cat <<EOF | kubectl apply -f -
apiVersion: gateway.networking.k8s.io/v1alpha2
kind: GRPCRoute
metadata:
  name: yages
  labels:
    example: grpc-routing
spec:
  parentRefs:
    - name: example-gateway
  hostnames:
    - "grpc-example.com"
  rules:
    - matches:
      - method:
          method: ServerReflectionInfo
          service: grpc.reflection.v1alpha.ServerReflection
      - method:
          method: "Pin.+"
          service: ".*.Echo"
          type: RegularExpression
      backendRefs:
        - group: ""
          kind: Service
          name: yages
          port: 9000
          weight: 1
EOF

Verify the GRPCRoute status:

kubectl get grpcroutes --selector=example=grpc-routing -o yaml

Test GRPC routing to the yages backend using the grpcurl command.

grpcurl -plaintext -authority=grpc-example.com ${GATEWAY_HOST}:80 yages.Echo/Ping

1.2.8 - HTTP Redirects

The HTTPRoute resource can issue redirects to clients or rewrite paths sent upstream using filters. Note that HTTPRoute rules cannot use both filter types at once. Currently, Envoy Gateway only supports core HTTPRoute filters which consist of RequestRedirect and RequestHeaderModifier at the time of this writing. To learn more about HTTP routing, refer to the Gateway API documentation.

Prerequisites

Follow the steps from the Quickstart to install Envoy Gateway and the example manifest. Before proceeding, you should be able to query the example backend using HTTPS.

Redirects

Redirects return HTTP 3XX responses to a client, instructing it to retrieve a different resource. A RequestRedirect filter instructs Gateways to emit a redirect response to requests that match the rule. For example, to issue a permanent redirect (301) from HTTP to HTTPS, configure requestRedirect.statusCode=301 and requestRedirect.scheme="https":

cat <<EOF | kubectl apply -f -
apiVersion: gateway.networking.k8s.io/v1
kind: HTTPRoute
metadata:
  name: http-to-https-filter-redirect
spec:
  parentRefs:
    - name: eg
  hostnames:
    - redirect.example
  rules:
    - filters:
      - type: RequestRedirect
        requestRedirect:
          scheme: https
          statusCode: 301
          hostname: www.example.com
EOF

Save and apply the following resource to your cluster:

---
apiVersion: gateway.networking.k8s.io/v1
kind: HTTPRoute
metadata:
  name: http-to-https-filter-redirect
spec:
  parentRefs:
    - name: eg
  hostnames:
    - redirect.example
  rules:
    - filters:
      - type: RequestRedirect
        requestRedirect:
          scheme: https
          statusCode: 301
          hostname: www.example.com

Note: 301 (default) and 302 are the only supported statusCodes.

The HTTPRoute status should indicate that it has been accepted and is bound to the example Gateway.

kubectl get httproute/http-to-https-filter-redirect -o yaml

Get the Gateway’s address:

export GATEWAY_HOST=$(kubectl get gateway/eg -o jsonpath='{.status.addresses[0].value}')

Querying redirect.example/get should result in a 301 response from the example Gateway and redirecting to the configured redirect hostname.

$ curl -L -vvv --header "Host: redirect.example" "http://${GATEWAY_HOST}/get"
...
< HTTP/1.1 301 Moved Permanently
< location: https://www.example.com/get
...

If you followed the steps in the Secure Gateways task, you should be able to curl the redirect location.

HTTP –> HTTPS

Listeners expose the TLS setting on a per domain or subdomain basis. TLS settings of a listener are applied to all domains that satisfy the hostname criteria.

Create a root certificate and private key to sign certificates:

openssl req -x509 -sha256 -nodes -days 365 -newkey rsa:2048 -subj '/CN=example.com' -keyout CA.key -out CA.crt
openssl req -out example.com.csr -newkey rsa:2048 -nodes -keyout tls.key -subj "/CN=example.com"

Generate a self-signed wildcard certificate for example.com with *.example.com extension

cat <<EOF | openssl x509 -req -days 365 -CA CA.crt -CAkey CA.key -set_serial 0 \
-subj "/CN=example.com" \
-in example.com.csr -out tls.crt -extensions v3_req  -extfile -
[v3_req]
keyUsage = keyEncipherment, dataEncipherment
extendedKeyUsage = serverAuth
subjectAltName = @alt_names
[alt_names]
DNS.1   = example.com
DNS.2   = *.example.com
EOF

Create the kubernetes tls secret

kubectl create secret tls example-com --key=tls.key --cert=tls.crt

Define a https listener on the existing gateway

cat <<EOF | kubectl apply -f -
apiVersion: gateway.networking.k8s.io/v1
kind: Gateway
metadata:
  name: eg
spec:
  gatewayClassName: eg
  listeners:
  - name: http
    port: 80
    protocol: HTTP
    # hostname: "*.example.com"
  - name: https
    port: 443
    protocol: HTTPS
    # hostname: "*.example.com"
    tls:
      mode: Terminate
      certificateRefs:
      - kind: Secret
        name: example-com
EOF

Save and apply the following resource to your cluster:

---
apiVersion: gateway.networking.k8s.io/v1
kind: Gateway
metadata:
  name: eg
spec:
  gatewayClassName: eg
  listeners:
  - name: http
    port: 80
    protocol: HTTP
    # hostname: "*.example.com"
  - name: https
    port: 443
    protocol: HTTPS
    # hostname: "*.example.com"
    tls:
      mode: Terminate
      certificateRefs:
      - kind: Secret
        name: example-com

Check for any TLS certificate issues on the gateway.

kubectl -n default describe gateway eg

Create two HTTPRoutes and attach them to the HTTP and HTTPS listeners using the sectionName field.

cat <<EOF | kubectl apply -f -
apiVersion: gateway.networking.k8s.io/v1
kind: HTTPRoute
metadata:
  name: tls-redirect
spec:
  parentRefs:
    - name: eg
      sectionName: http
  hostnames:
    # - "*.example.com" # catch all hostnames
    - "www.example.com"
  rules:
    - filters:
        - type: RequestRedirect
          requestRedirect:
            scheme: https
---
apiVersion: gateway.networking.k8s.io/v1
kind: HTTPRoute
metadata:
  name: backend
spec:
  parentRefs:
    - name: eg
      sectionName: https
  hostnames:
    - "www.example.com"
  rules:
    - backendRefs:
        - group: ""
          kind: Service
          name: backend
          port: 3000
          weight: 1
      matches:
        - path:
            type: PathPrefix
            value: /
EOF

Save and apply the following resources to your cluster:

---
apiVersion: gateway.networking.k8s.io/v1
kind: HTTPRoute
metadata:
  name: tls-redirect
spec:
  parentRefs:
    - name: eg
      sectionName: http
  hostnames:
    # - "*.example.com" # catch all hostnames
    - "www.example.com"
  rules:
    - filters:
        - type: RequestRedirect
          requestRedirect:
            scheme: https
---
apiVersion: gateway.networking.k8s.io/v1
kind: HTTPRoute
metadata:
  name: backend
spec:
  parentRefs:
    - name: eg
      sectionName: https
  hostnames:
    - "www.example.com"
  rules:
    - backendRefs:
        - group: ""
          kind: Service
          name: backend
          port: 3000
          weight: 1
      matches:
        - path:
            type: PathPrefix
            value: /

Curl the example app through http listener:

curl --verbose --header "Host: www.example.com" http://$GATEWAY_HOST/get

Curl the example app through https listener:

curl -v -H 'Host:www.example.com' --resolve "www.example.com:443:$GATEWAY_HOST" \
--cacert CA.crt https://www.example.com:443/get

Path Redirects

Path redirects use an HTTP Path Modifier to replace either entire paths or path prefixes. For example, the HTTPRoute below will issue a 302 redirect to all path.redirect.example requests whose path begins with /get to /status/200.

cat <<EOF | kubectl apply -f -
apiVersion: gateway.networking.k8s.io/v1
kind: HTTPRoute
metadata:
  name: http-filter-path-redirect
spec:
  parentRefs:
    - name: eg
  hostnames:
    - path.redirect.example
  rules:
    - matches:
      - path:
          type: PathPrefix
          value: /get
      filters:
      - type: RequestRedirect
        requestRedirect:
          path:
            type: ReplaceFullPath
            replaceFullPath: /status/200
          statusCode: 302
EOF

Save and apply the following resource to your cluster:

---
apiVersion: gateway.networking.k8s.io/v1
kind: HTTPRoute
metadata:
  name: http-filter-path-redirect
spec:
  parentRefs:
    - name: eg
  hostnames:
    - path.redirect.example
  rules:
    - matches:
      - path:
          type: PathPrefix
          value: /get
      filters:
      - type: RequestRedirect
        requestRedirect:
          path:
            type: ReplaceFullPath
            replaceFullPath: /status/200
          statusCode: 302

The HTTPRoute status should indicate that it has been accepted and is bound to the example Gateway.

kubectl get httproute/http-filter-path-redirect -o yaml

Querying path.redirect.example should result in a 302 response from the example Gateway and a redirect location containing the configured redirect path.

Query the path.redirect.example host:

curl -vvv --header "Host: path.redirect.example" "http://${GATEWAY_HOST}/get"

You should receive a 302 with a redirect location of http://path.redirect.example/status/200.

1.2.9 - HTTP Request Headers

The HTTPRoute resource can modify the headers of a request before forwarding it to the upstream service. HTTPRoute rules cannot use both filter types at once. Currently, Envoy Gateway only supports core HTTPRoute filters which consist of RequestRedirect and RequestHeaderModifier at the time of this writing. To learn more about HTTP routing, refer to the Gateway API documentation.

A RequestHeaderModifier filter instructs Gateways to modify the headers in requests that match the rule before forwarding the request upstream. Note that the RequestHeaderModifier filter will only modify headers before the request is sent from Envoy to the upstream service and will not affect response headers returned to the downstream client.

Prerequisites

Follow the steps from the Quickstart to install Envoy Gateway and the example manifest. Before proceeding, you should be able to query the example backend using HTTP.

Adding Request Headers

The RequestHeaderModifier filter can add new headers to a request before it is sent to the upstream. If the request does not have the header configured by the filter, then that header will be added to the request. If the request already has the header configured by the filter, then the value of the header in the filter will be appended to the value of the header in the request.

cat <<EOF | kubectl apply -f -
apiVersion: gateway.networking.k8s.io/v1
kind: HTTPRoute
metadata:
  name: http-headers
spec:
  parentRefs:
  - name: eg
  hostnames:
  - headers.example
  rules:
  - matches:
    - path:
        type: PathPrefix
        value: /
    backendRefs:
    - group: ""
      kind: Service
      name: backend
      port: 3000
      weight: 1
    filters:
    - type: RequestHeaderModifier
      requestHeaderModifier:
        add:
        - name: "add-header"
          value: "foo"
EOF

The HTTPRoute status should indicate that it has been accepted and is bound to the example Gateway.

kubectl get httproute/http-headers -o yaml

Get the Gateway’s address:

export GATEWAY_HOST=$(kubectl get gateway/eg -o jsonpath='{.status.addresses[0].value}')

Querying headers.example/get should result in a 200 response from the example Gateway and the output from the example app should indicate that the upstream example app received the header add-header with the value: something,foo

$ curl -vvv --header "Host: headers.example" "http://${GATEWAY_HOST}/get" --header "add-header: something"
...
> GET /get HTTP/1.1
> Host: headers.example
> User-Agent: curl/7.81.0
> Accept: */*
> add-header: something
>
* Mark bundle as not supporting multiuse
< HTTP/1.1 200 OK
< content-type: application/json
< x-content-type-options: nosniff
< content-length: 474
< x-envoy-upstream-service-time: 0
< server: envoy
<
...
 "headers": {
  "Accept": [
   "*/*"
  ],
  "Add-Header": [
   "something",
   "foo"
  ],
...

Setting Request Headers

Setting headers is similar to adding headers. If the request does not have the header configured by the filter, then it will be added, but unlike adding request headers which will append the value of the header if the request already contains it, setting a header will cause the value to be replaced by the value configured in the filter.

cat <<EOF | kubectl apply -f -
apiVersion: gateway.networking.k8s.io/v1
kind: HTTPRoute
metadata:
  name: http-headers
spec:
  parentRefs:
  - name: eg
  hostnames:
  - headers.example
  rules:
  - backendRefs:
    - group: ""
      kind: Service
      name: backend
      port: 3000
      weight: 1
    matches:
    - path:
        type: PathPrefix
        value: /
    filters:
    - type: RequestHeaderModifier
      requestHeaderModifier:
        set:
        - name: "set-header"
          value: "foo"
EOF

Querying headers.example/get should result in a 200 response from the example Gateway and the output from the example app should indicate that the upstream example app received the header add-header with the original value something replaced by foo.

$ curl -vvv --header "Host: headers.example" "http://${GATEWAY_HOST}/get" --header "set-header: something"
...
> GET /get HTTP/1.1
> Host: headers.example
> User-Agent: curl/7.81.0
> Accept: */*
> add-header: something
>
* Mark bundle as not supporting multiuse
< HTTP/1.1 200 OK
< content-type: application/json
< x-content-type-options: nosniff
< content-length: 474
< x-envoy-upstream-service-time: 0
< server: envoy
<
 "headers": {
  "Accept": [
   "*/*"
  ],
  "Set-Header": [
   "foo"
  ],
...

Removing Request Headers

Headers can be removed from a request by simply supplying a list of header names.

Setting headers is similar to adding headers. If the request does not have the header configured by the filter, then it will be added, but unlike adding request headers which will append the value of the header if the request already contains it, setting a header will cause the value to be replaced by the value configured in the filter.

cat <<EOF | kubectl apply -f -
apiVersion: gateway.networking.k8s.io/v1
kind: HTTPRoute
metadata:
  name: http-headers
spec:
  parentRefs:
  - name: eg
  hostnames:
  - headers.example
  rules:
  - matches:
    - path:
        type: PathPrefix
        value: /
    backendRefs:
    - group: ""
      name: backend
      port: 3000
      weight: 1
    filters:
    - type: RequestHeaderModifier
      requestHeaderModifier:
        remove:
        - "remove-header"
EOF

Querying headers.example/get should result in a 200 response from the example Gateway and the output from the example app should indicate that the upstream example app received the header add-header, but the header remove-header that was sent by curl was removed before the upstream received the request.

$ curl -vvv --header "Host: headers.example" "http://${GATEWAY_HOST}/get" --header "add-header: something" --header "remove-header: foo"
...
> GET /get HTTP/1.1
> Host: headers.example
> User-Agent: curl/7.81.0
> Accept: */*
> add-header: something
>
* Mark bundle as not supporting multiuse
< HTTP/1.1 200 OK
< content-type: application/json
< x-content-type-options: nosniff
< content-length: 474
< x-envoy-upstream-service-time: 0
< server: envoy
<

 "headers": {
  "Accept": [
   "*/*"
  ],
  "Add-Header": [
   "something"
  ],
...

Combining Filters

Headers can be added/set/removed in a single filter on the same HTTPRoute and they will all perform as expected

cat <<EOF | kubectl apply -f -
apiVersion: gateway.networking.k8s.io/v1
kind: HTTPRoute
metadata:
  name: http-headers
spec:
  parentRefs:
  - name: eg
  hostnames:
  - headers.example
  rules:
  - matches:
    - path:
        type: PathPrefix
        value: /
    backendRefs:
    - group: ""
      kind: Service
      name: backend
      port: 3000
      weight: 1
    filters:
    - type: RequestHeaderModifier
      requestHeaderModifier:
        add:
        - name: "add-header-1"
          value: "foo"
        set:
        - name: "set-header-1"
          value: "bar"
        remove:
        - "removed-header"
EOF

1.2.10 - HTTP Response Headers

The HTTPRoute resource can modify the headers of a response before responding it to the downstream service. To learn more about HTTP routing, refer to the Gateway API documentation.

A ResponseHeaderModifier filter instructs Gateways to modify the headers in responses that match the rule before responding to the downstream. Note that the ResponseHeaderModifier filter will only modify headers before the response is returned from Envoy to the downstream client and will not affect request headers forwarding to the upstream service.

Prerequisites

Follow the steps from the Quickstart to install Envoy Gateway and the example manifest. Before proceeding, you should be able to query the example backend using HTTP.

Adding Response Headers

The ResponseHeaderModifier filter can add new headers to a response before it is sent to the upstream. If the response does not have the header configured by the filter, then that header will be added to the response. If the response already has the header configured by the filter, then the value of the header in the filter will be appended to the value of the header in the response.

cat <<EOF | kubectl apply -f -
apiVersion: gateway.networking.k8s.io/v1
kind: HTTPRoute
metadata:
  name: http-headers
spec:
  parentRefs:
  - name: eg
  hostnames:
  - headers.example
  rules:
  - matches:
    - path:
        type: PathPrefix
        value: /
    backendRefs:
    - group: ""
      kind: Service
      name: backend
      port: 3000
      weight: 1
    filters:
    - type: ResponseHeaderModifier
      responseHeaderModifier:
        add:
        - name: "add-header"
          value: "foo"
EOF

The HTTPRoute status should indicate that it has been accepted and is bound to the example Gateway.

kubectl get httproute/http-headers -o yaml

Get the Gateway’s address:

export GATEWAY_HOST=$(kubectl get gateway/eg -o jsonpath='{.status.addresses[0].value}')

Querying headers.example/get should result in a 200 response from the example Gateway and the output from the example app should indicate that the downstream client received the header add-header with the value: foo

$ curl -vvv --header "Host: headers.example" "http://${GATEWAY_HOST}/get" -H 'X-Echo-Set-Header: X-Foo: value1'
...
> GET /get HTTP/1.1
> Host: headers.example
> User-Agent: curl/7.81.0
> Accept: */*
> X-Echo-Set-Header: X-Foo: value1
>
* Mark bundle as not supporting multiuse
< HTTP/1.1 200 OK
< content-type: application/json
< x-content-type-options: nosniff
< content-length: 474
< x-envoy-upstream-service-time: 0
< server: envoy
< x-foo: value1
< add-header: foo
<
...
 "headers": {
  "Accept": [
   "*/*"
  ],
  "X-Echo-Set-Header": [
   "X-Foo: value1"
  ]
...

Setting Response Headers

Setting headers is similar to adding headers. If the response does not have the header configured by the filter, then it will be added, but unlike adding response headers which will append the value of the header if the response already contains it, setting a header will cause the value to be replaced by the value configured in the filter.

cat <<EOF | kubectl apply -f -
apiVersion: gateway.networking.k8s.io/v1
kind: HTTPRoute
metadata:
  name: http-headers
spec:
  parentRefs:
  - name: eg
  hostnames:
  - headers.example
  rules:
  - backendRefs:
    - group: ""
      kind: Service
      name: backend
      port: 3000
      weight: 1
    matches:
    - path:
        type: PathPrefix
        value: /
    filters:
    - type: ResponseHeaderModifier
      responseHeaderModifier:
        set:
        - name: "set-header"
          value: "foo"
EOF

Querying headers.example/get should result in a 200 response from the example Gateway and the output from the example app should indicate that the downstream client received the header set-header with the original value value1 replaced by foo.

$ curl -vvv --header "Host: headers.example" "http://${GATEWAY_HOST}/get" -H 'X-Echo-Set-Header: set-header: value1'
...
> GET /get HTTP/1.1
> Host: headers.example
> User-Agent: curl/7.81.0
> Accept: */*
> X-Echo-Set-Header: set-header: value1
>
* Mark bundle as not supporting multiuse
< HTTP/1.1 200 OK
< content-type: application/json
< x-content-type-options: nosniff
< content-length: 474
< x-envoy-upstream-service-time: 0
< server: envoy
< set-header: foo
<
 "headers": {
  "Accept": [
   "*/*"
  ],
  "X-Echo-Set-Header": [
    "set-header": value1"
  ]
...

Removing Response Headers

Headers can be removed from a response by simply supplying a list of header names.

Setting headers is similar to adding headers. If the response does not have the header configured by the filter, then it will be added, but unlike adding response headers which will append the value of the header if the response already contains it, setting a header will cause the value to be replaced by the value configured in the filter.

cat <<EOF | kubectl apply -f -
apiVersion: gateway.networking.k8s.io/v1
kind: HTTPRoute
metadata:
  name: http-headers
spec:
  parentRefs:
  - name: eg
  hostnames:
  - headers.example
  rules:
  - matches:
    - path:
        type: PathPrefix
        value: /
    backendRefs:
    - group: ""
      name: backend
      port: 3000
      weight: 1
    filters:
    - type: ResponseHeaderModifier
      responseHeaderModifier:
        remove:
        - "remove-header"
EOF

Querying headers.example/get should result in a 200 response from the example Gateway and the output from the example app should indicate that the header remove-header that was sent by curl was removed before the upstream received the response.

$ curl -vvv --header "Host: headers.example" "http://${GATEWAY_HOST}/get" -H 'X-Echo-Set-Header: remove-header: value1'
...
> GET /get HTTP/1.1
> Host: headers.example
> User-Agent: curl/7.81.0
> Accept: */*
> X-Echo-Set-Header: remove-header: value1
>
* Mark bundle as not supporting multiuse
< HTTP/1.1 200 OK
< content-type: application/json
< x-content-type-options: nosniff
< content-length: 474
< x-envoy-upstream-service-time: 0
< server: envoy
<

 "headers": {
  "Accept": [
   "*/*"
  ],
  "X-Echo-Set-Header": [
    "remove-header": value1"
  ]
...

Combining Filters

Headers can be added/set/removed in a single filter on the same HTTPRoute and they will all perform as expected

cat <<EOF | kubectl apply -f -
apiVersion: gateway.networking.k8s.io/v1
kind: HTTPRoute
metadata:
  name: http-headers
spec:
  parentRefs:
  - name: eg
  hostnames:
  - headers.example
  rules:
  - matches:
    - path:
        type: PathPrefix
        value: /
    backendRefs:
    - group: ""
      kind: Service
      name: backend
      port: 3000
      weight: 1
    filters:
    - type: ResponseHeaderModifier
      responseHeaderModifier:
        add:
        - name: "add-header-1"
          value: "foo"
        set:
        - name: "set-header-1"
          value: "bar"
        remove:
        - "removed-header"
EOF

1.2.11 - HTTP Routing

The HTTPRoute resource allows users to configure HTTP routing by matching HTTP traffic and forwarding it to Kubernetes backends. Currently, the only supported backend supported by Envoy Gateway is a Service resource. This guide shows how to route traffic based on host, header, and path fields and forward the traffic to different Kubernetes Services. To learn more about HTTP routing, refer to the Gateway API documentation.

Prerequisites

Follow the steps from the Quickstart guide to install Envoy Gateway and the example manifest. Before proceeding, you should be able to query the example backend using HTTP.

Installation

Install the HTTP routing example resources:

kubectl apply -f https://raw.githubusercontent.com/envoyproxy/gateway/latest/examples/kubernetes/http-routing.yaml

The manifest installs a GatewayClass, Gateway, four Deployments, four Services, and three HTTPRoute resources. The GatewayClass is a cluster-scoped resource that represents a class of Gateways that can be instantiated.

Note: Envoy Gateway is configured by default to manage a GatewayClass with controllerName: gateway.envoyproxy.io/gatewayclass-controller.

Verification

Check the status of the GatewayClass:

kubectl get gc --selector=example=http-routing

The status should reflect “Accepted=True”, indicating Envoy Gateway is managing the GatewayClass.

A Gateway represents configuration of infrastructure. When a Gateway is created, Envoy proxy infrastructure is provisioned or configured by Envoy Gateway. The gatewayClassName defines the name of a GatewayClass used by this Gateway. Check the status of the Gateway:

kubectl get gateways --selector=example=http-routing

The status should reflect “Ready=True”, indicating the Envoy proxy infrastructure has been provisioned. The status also provides the address of the Gateway. This address is used later in the guide to test connectivity to proxied backend services.

The three HTTPRoute resources create routing rules on the Gateway. In order to receive traffic from a Gateway, an HTTPRoute must be configured with parentRefs which reference the parent Gateway(s) that it should be attached to. An HTTPRoute can match against a single set of hostnames. These hostnames are matched before any other matching within the HTTPRoute takes place. Since example.com, foo.example.com, and bar.example.com are separate hosts with different routing requirements, each is deployed as its own HTTPRoute - example-route, ``foo-route, and bar-route.

Check the status of the HTTPRoutes:

kubectl get httproutes --selector=example=http-routing -o yaml

The status for each HTTPRoute should surface “Accepted=True” and a parentRef that references the example Gateway. The example-route matches any traffic for “example.com” and forwards it to the “example-svc” Service.

Testing the Configuration

Before testing HTTP routing to the example-svc backend, get the Gateway’s address.

export GATEWAY_HOST=$(kubectl get gateway/example-gateway -o jsonpath='{.status.addresses[0].value}')

Test HTTP routing to the example-svc backend.

curl -vvv --header "Host: example.com" "http://${GATEWAY_HOST}/"

A 200 status code should be returned and the body should include "pod": "example-backend-*" indicating the traffic was routed to the example backend service. If you change the hostname to a hostname not represented in any of the HTTPRoutes, e.g. “www.example.com”, the HTTP traffic will not be routed and a 404 should be returned.

The foo-route matches any traffic for foo.example.com and applies its routing rules to forward the traffic to the “foo-svc” Service. Since there is only one path prefix match for /login, only foo.example.com/login/* traffic will be forwarded. Test HTTP routing to the foo-svc backend.

curl -vvv --header "Host: foo.example.com" "http://${GATEWAY_HOST}/login"

A 200 status code should be returned and the body should include "pod": "foo-backend-*" indicating the traffic was routed to the foo backend service. Traffic to any other paths that do not begin with /login will not be matched by this HTTPRoute. Test this by removing /login from the request.

curl -vvv --header "Host: foo.example.com" "http://${GATEWAY_HOST}/"

The HTTP traffic will not be routed and a 404 should be returned.

Similarly, the bar-route HTTPRoute matches traffic for bar.example.com. All traffic for this hostname will be evaluated against the routing rules. The most specific match will take precedence which means that any traffic with the env:canary header will be forwarded to bar-svc-canary and if the header is missing or not canary then it’ll be forwarded to bar-svc. Test HTTP routing to the bar-svc backend.

curl -vvv --header "Host: bar.example.com" "http://${GATEWAY_HOST}/"

A 200 status code should be returned and the body should include "pod": "bar-backend-*" indicating the traffic was routed to the foo backend service.

Test HTTP routing to the bar-canary-svc backend by adding the env: canary header to the request.

curl -vvv --header "Host: bar.example.com" --header "env: canary" "http://${GATEWAY_HOST}/"

A 200 status code should be returned and the body should include "pod": "bar-canary-backend-*" indicating the traffic was routed to the foo backend service.

JWT Claims Based Routing

Users can route to a specific backend by matching on JWT claims. This can be achieved, by defining a SecurityPolicy with a jwt configuration that does the following

  • Converts jwt claims to headers, which can be used for header based routing
  • Sets the recomputeRoute field to true. This is required so that the incoming request matches on a fallback/catch all route where the JWT can be authenticated, the claims from the JWT can be converted to headers, and then the route match can be recomputed to match based on the updated headers.

For this feature to work please make sure

  • you have a fallback route rule defined, the backend for this route rule can be invalid.
  • The SecurityPolicy is applied to both the fallback route as well as the route with the claim header matches, to avoid spoofing.
cat <<EOF | kubectl apply -f -
apiVersion: gateway.envoyproxy.io/v1alpha1
kind: SecurityPolicy
metadata:
  name: jwt-example
spec:
  targetRef:
    group: gateway.networking.k8s.io
    kind: HTTPRoute
    name: jwt-claim-routing
  jwt:
    providers:
      - name: example
        recomputeRoute: true
        claimToHeaders:
          - claim: sub
            header: x-sub
          - claim: admin
            header: x-admin
          - claim: name
            header: x-name
        remoteJWKS:
          uri: https://raw.githubusercontent.com/envoyproxy/gateway/main/examples/kubernetes/jwt/jwks.json
---
apiVersion: gateway.networking.k8s.io/v1
kind: HTTPRoute
metadata:
  name: jwt-claim-routing
spec:
  parentRefs:
    - name: eg
  rules:
    - backendRefs:
        - kind: Service
          name: foo-svc
          port: 8080
          weight: 1
      matches:
        - headers:
            - name: x-name
              value: John Doe
    - backendRefs:
        - kind: Service
          name: bar-svc
          port: 8080
          weight: 1
      matches:
        - headers:
            - name: x-name
              value: Tom
    # catch all
    - backendRefs:
        - kind: Service
          name: infra-backend-invalid
          port: 8080
          weight: 1
      matches:
        - path:
            type: PathPrefix
            value: /
EOF

Get the JWT used for testing request authentication:

TOKEN=$(curl https://raw.githubusercontent.com/envoyproxy/gateway/main/examples/kubernetes/jwt/test.jwt -s) && echo "$TOKEN" | cut -d '.' -f2 - | base64 --decode

Test routing to the foo-svc backend by specifying a JWT Token with a claim name: John Doe.

curl -sS -H "Host: foo.example.com" -H "Authorization: Bearer $TOKEN" "http://${GATEWAY_HOST}/login" | jq .pod
"foo-backend-6df8cc6b9f-fmwcg"

Get another JWT used for testing request authentication:

TOKEN=$(curl https://raw.githubusercontent.com/envoyproxy/gateway/main/examples/kubernetes/jwt/with-different-claim.jwt -s) && echo "$TOKEN" | cut -d '.' -f2 - | base64 --decode

Test HTTP routing to the bar-svc backend by specifying a JWT Token with a claim name: Tom.

curl -sS -H "Host: bar.example.com" -H "Authorization: Bearer $TOKEN" "http://${GATEWAY_HOST}/" | jq .pod
"bar-backend-6688b8944c-s8htr"

1.2.12 - HTTP Timeouts

The default request timeout is set to 15 seconds in Envoy Proxy. The HTTPRouteTimeouts resource allows users to configure request timeouts for an HTTPRouteRule. This task shows you how to configure timeouts.

The HTTPRouteTimeouts supports two kinds of timeouts:

  • request: Request specifies the maximum duration for a gateway to respond to an HTTP request.
  • backendRequest: BackendRequest specifies a timeout for an individual request from the gateway to a backend.

Note: The Request duration must be >= BackendRequest duration

Installation

Follow the steps from the Quickstart to install Envoy Gateway and the example manifest. Before proceeding, you should be able to query the example backend using HTTP.

Verification

backend has the ability to delay responses; we use it as the backend to control response time.

request timeout

We configure the backend to delay responses by 3 seconds, then we set the request timeout to 4 seconds. Envoy Gateway will successfully respond to the request.

cat <<EOF | kubectl apply -f -
apiVersion: gateway.networking.k8s.io/v1
kind: HTTPRoute
metadata:
  name: backend
spec:
  hostnames:
  - timeout.example.com
  parentRefs:
  - group: gateway.networking.k8s.io
    kind: Gateway
    name: eg
  rules:
  - backendRefs:
    - group: ""
      kind: Service
      name: backend
      port: 3000
      weight: 1
    matches:
    - path:
        type: PathPrefix
        value: /
    timeouts:
      request: "4s"
EOF

Save and apply the following resource to your cluster:

---
apiVersion: gateway.networking.k8s.io/v1
kind: HTTPRoute
metadata:
  name: backend
spec:
  hostnames:
  - timeout.example.com
  parentRefs:
  - group: gateway.networking.k8s.io
    kind: Gateway
    name: eg
  rules:
  - backendRefs:
    - group: ""
      kind: Service
      name: backend
      port: 3000
      weight: 1
    matches:
    - path:
        type: PathPrefix
        value: /
    timeouts:
      request: "4s"
curl --header "Host: timeout.example.com" http://${GATEWAY_HOST}/?delay=3s  -I
HTTP/1.1 200 OK
content-type: application/json
x-content-type-options: nosniff
date: Mon, 04 Mar 2024 02:34:21 GMT
content-length: 480

Then we set the request timeout to 2 seconds. In this case, Envoy Gateway will respond with a timeout.

cat <<EOF | kubectl apply -f -
apiVersion: gateway.networking.k8s.io/v1
kind: HTTPRoute
metadata:
  name: backend
spec:
  hostnames:
  - timeout.example.com
  parentRefs:
  - group: gateway.networking.k8s.io
    kind: Gateway
    name: eg
  rules:
  - backendRefs:
    - group: ""
      kind: Service
      name: backend
      port: 3000
      weight: 1
    matches:
    - path:
        type: PathPrefix
        value: /
    timeouts:
      request: "2s"
EOF

Save and apply the following resource to your cluster:

---
apiVersion: gateway.networking.k8s.io/v1
kind: HTTPRoute
metadata:
  name: backend
spec:
  hostnames:
  - timeout.example.com
  parentRefs:
  - group: gateway.networking.k8s.io
    kind: Gateway
    name: eg
  rules:
  - backendRefs:
    - group: ""
      kind: Service
      name: backend
      port: 3000
      weight: 1
    matches:
    - path:
        type: PathPrefix
        value: /
    timeouts:
      request: "2s"
curl --header "Host: timeout.example.com" http://${GATEWAY_HOST}/?delay=3s  -v
*   Trying 127.0.0.1:80...
* Connected to 127.0.0.1 (127.0.0.1) port 80
> GET /?delay=3s HTTP/1.1
> Host: timeout.example.com
> User-Agent: curl/8.6.0
> Accept: */*
>


< HTTP/1.1 504 Gateway Timeout
< content-length: 24
< content-type: text/plain
< date: Mon, 04 Mar 2024 02:35:03 GMT
<
* Connection #0 to host 127.0.0.1 left intact
upstream request timeout

1.2.13 - HTTP URL Rewrite

HTTPURLRewriteFilter defines a filter that modifies a request during forwarding. At most one of these filters may be used on a Route rule. This MUST NOT be used on the same Route rule as a HTTPRequestRedirect filter.

Prerequisites

Follow the steps from the Quickstart to install Envoy Gateway and the example manifest. Before proceeding, you should be able to query the example backend using HTTP.

Rewrite URL Prefix Path

You can configure to rewrite the prefix in the url like below. In this example, any curls to http://${GATEWAY_HOST}/get/xxx will be rewritten to http://${GATEWAY_HOST}/replace/xxx.

cat <<EOF | kubectl apply -f -
apiVersion: gateway.networking.k8s.io/v1
kind: HTTPRoute
metadata:
  name: http-filter-url-rewrite
spec:
  parentRefs:
    - name: eg
  hostnames:
    - path.rewrite.example
  rules:
    - matches:
      - path:
          value: "/get"
      filters:
      - type: URLRewrite
        urlRewrite:
          path:
            type: ReplacePrefixMatch
            replacePrefixMatch: /replace
      backendRefs:
      - name: backend
        port: 3000
EOF

The HTTPRoute status should indicate that it has been accepted and is bound to the example Gateway.

kubectl get httproute/http-filter-url-rewrite -o yaml

Get the Gateway’s address:

export GATEWAY_HOST=$(kubectl get gateway/eg -o jsonpath='{.status.addresses[0].value}')

Querying http://${GATEWAY_HOST}/get/origin/path should rewrite to http://${GATEWAY_HOST}/replace/origin/path.

$ curl -L -vvv --header "Host: path.rewrite.example" "http://${GATEWAY_HOST}/get/origin/path"
...
> GET /get/origin/path HTTP/1.1
> Host: path.rewrite.example
> User-Agent: curl/7.85.0
> Accept: */*
>

< HTTP/1.1 200 OK
< content-type: application/json
< x-content-type-options: nosniff
< date: Wed, 21 Dec 2022 11:03:28 GMT
< content-length: 503
< x-envoy-upstream-service-time: 0
< server: envoy
<
{
 "path": "/replace/origin/path",
 "host": "path.rewrite.example",
 "method": "GET",
 "proto": "HTTP/1.1",
 "headers": {
  "Accept": [
   "*/*"
  ],
  "User-Agent": [
   "curl/7.85.0"
  ],
  "X-Envoy-Expected-Rq-Timeout-Ms": [
   "15000"
  ],
  "X-Envoy-Original-Path": [
   "/get/origin/path"
  ],
  "X-Forwarded-Proto": [
   "http"
  ],
  "X-Request-Id": [
   "fd84b842-9937-4fb5-83c7-61470d854b90"
  ]
 },
 "namespace": "default",
 "ingress": "",
 "service": "",
 "pod": "backend-6fdd4b9bd8-8vlc5"
...

You can see that the X-Envoy-Original-Path is /get/origin/path, but the actual path is /replace/origin/path.

Rewrite URL Full Path

You can configure to rewrite the fullpath in the url like below. In this example, any request sent to http://${GATEWAY_HOST}/get/origin/path/xxxx will be rewritten to http://${GATEWAY_HOST}/force/replace/fullpath.

cat <<EOF | kubectl apply -f -
apiVersion: gateway.networking.k8s.io/v1
kind: HTTPRoute
metadata:
  name: http-filter-url-rewrite
spec:
  parentRefs:
    - name: eg
  hostnames:
    - path.rewrite.example
  rules:
    - matches:
      - path:
          type: PathPrefix
          value: "/get/origin/path"
      filters:
      - type: URLRewrite
        urlRewrite:
          path:
            type: ReplaceFullPath
            replaceFullPath: /force/replace/fullpath
      backendRefs:
      - name: backend
        port: 3000
EOF

The HTTPRoute status should indicate that it has been accepted and is bound to the example Gateway.

kubectl get httproute/http-filter-url-rewrite -o yaml

Querying http://${GATEWAY_HOST}/get/origin/path/extra should rewrite the request to http://${GATEWAY_HOST}/force/replace/fullpath.

$ curl -L -vvv --header "Host: path.rewrite.example" "http://${GATEWAY_HOST}/get/origin/path/extra"
...
> GET /get/origin/path/extra HTTP/1.1
> Host: path.rewrite.example
> User-Agent: curl/7.85.0
> Accept: */*
>
* Mark bundle as not supporting multiuse
< HTTP/1.1 200 OK
< content-type: application/json
< x-content-type-options: nosniff
< date: Wed, 21 Dec 2022 11:09:31 GMT
< content-length: 512
< x-envoy-upstream-service-time: 0
< server: envoy
<
{
 "path": "/force/replace/fullpath",
 "host": "path.rewrite.example",
 "method": "GET",
 "proto": "HTTP/1.1",
 "headers": {
  "Accept": [
   "*/*"
  ],
  "User-Agent": [
   "curl/7.85.0"
  ],
  "X-Envoy-Expected-Rq-Timeout-Ms": [
   "15000"
  ],
  "X-Envoy-Original-Path": [
   "/get/origin/path/extra"
  ],
  "X-Forwarded-Proto": [
   "http"
  ],
  "X-Request-Id": [
   "8ab774d6-9ffa-4faa-abbb-f45b0db00895"
  ]
 },
 "namespace": "default",
 "ingress": "",
 "service": "",
 "pod": "backend-6fdd4b9bd8-8vlc5"
...

You can see that the X-Envoy-Original-Path is /get/origin/path/extra, but the actual path is /force/replace/fullpath.

Rewrite Host Name

You can configure to rewrite the hostname like below. In this example, any requests sent to http://${GATEWAY_HOST}/get with --header "Host: path.rewrite.example" will rewrite host into envoygateway.io.

cat <<EOF | kubectl apply -f -
apiVersion: gateway.networking.k8s.io/v1
kind: HTTPRoute
metadata:
  name: http-filter-url-rewrite
spec:
  parentRefs:
    - name: eg
  hostnames:
    - path.rewrite.example
  rules:
    - matches:
      - path:
          type: PathPrefix
          value: "/get"
      filters:
      - type: URLRewrite
        urlRewrite:
          hostname: "envoygateway.io"
      backendRefs:
      - name: backend
        port: 3000
EOF

The HTTPRoute status should indicate that it has been accepted and is bound to the example Gateway.

kubectl get httproute/http-filter-url-rewrite -o yaml

Querying http://${GATEWAY_HOST}/get with --header "Host: path.rewrite.example" will rewrite host into envoygateway.io.

$ curl -L -vvv --header "Host: path.rewrite.example" "http://${GATEWAY_HOST}/get"
...
> GET /get HTTP/1.1
> Host: path.rewrite.example
> User-Agent: curl/7.85.0
> Accept: */*
>
* Mark bundle as not supporting multiuse
< HTTP/1.1 200 OK
< content-type: application/json
< x-content-type-options: nosniff
< date: Wed, 21 Dec 2022 11:15:15 GMT
< content-length: 481
< x-envoy-upstream-service-time: 0
< server: envoy
<
{
 "path": "/get",
 "host": "envoygateway.io",
 "method": "GET",
 "proto": "HTTP/1.1",
 "headers": {
  "Accept": [
   "*/*"
  ],
  "User-Agent": [
   "curl/7.85.0"
  ],
  "X-Envoy-Expected-Rq-Timeout-Ms": [
   "15000"
  ],
  "X-Forwarded-Host": [
   "path.rewrite.example"
  ],
  "X-Forwarded-Proto": [
   "http"
  ],
  "X-Request-Id": [
   "39aa447c-97b9-45a3-a675-9fb266ab1af0"
  ]
 },
 "namespace": "default",
 "ingress": "",
 "service": "",
 "pod": "backend-6fdd4b9bd8-8vlc5"
...

You can see that the X-Forwarded-Host is path.rewrite.example, but the actual host is envoygateway.io.

1.2.14 - HTTP3

This task will help you get started using HTTP3 using EG. This task uses a self-signed CA, so it should be used for testing and demonstration purposes only.

Prerequisites

  • OpenSSL to generate TLS assets.

Installation

Follow the steps from the Quickstart to install Envoy Gateway and the example manifest. Before proceeding, you should be able to query the example backend using HTTP.

TLS Certificates

Generate the certificates and keys used by the Gateway to terminate client TLS connections.

Create a root certificate and private key to sign certificates:

openssl req -x509 -sha256 -nodes -days 365 -newkey rsa:2048 -subj '/O=example Inc./CN=example.com' -keyout example.com.key -out example.com.crt

Create a certificate and a private key for www.example.com:

openssl req -out www.example.com.csr -newkey rsa:2048 -nodes -keyout www.example.com.key -subj "/CN=www.example.com/O=example organization"
openssl x509 -req -days 365 -CA example.com.crt -CAkey example.com.key -set_serial 0 -in www.example.com.csr -out www.example.com.crt

Store the cert/key in a Secret:

kubectl create secret tls example-cert --key=www.example.com.key --cert=www.example.com.crt

Update the Gateway from the Quickstart to include an HTTPS listener that listens on port 443 and references the example-cert Secret:

kubectl patch gateway eg --type=json --patch '
  - op: add
    path: /spec/listeners/-
    value:
      name: https
      protocol: HTTPS
      port: 443
      tls:
        mode: Terminate
        certificateRefs:
        - kind: Secret
          group: ""
          name: example-cert
  '

Apply the following ClientTrafficPolicy to enable HTTP3

kubectl apply -f - <<EOF
apiVersion: gateway.envoyproxy.io/v1alpha1
kind: ClientTrafficPolicy
metadata:
  name: enable-http3
spec:
  http3: {}
  targetRef:
    group: gateway.networking.k8s.io
    kind: Gateway
    name: eg
    namespace: default
EOF

Verify the Gateway status:

kubectl get gateway/eg -o yaml

Testing

Clusters without External LoadBalancer Support

It is not possible at the moment to port-forward UDP protocol in kubernetes service check out https://github.com/kubernetes/kubernetes/issues/47862. Hence we need external loadbalancer to test this feature out.

Clusters with External LoadBalancer Support

Get the External IP of the Gateway:

export GATEWAY_HOST=$(kubectl get gateway/eg -o jsonpath='{.status.addresses[0].value}')

Query the example app through the Gateway:

Below example uses a custom docker image with custom curl binary with built-in http3.

docker run --net=host --rm ghcr.io/macbre/curl-http3 curl -kv --http3 -HHost:www.example.com --resolve "www.example.com:443:${GATEWAY_HOST}" https://www.example.com/get

1.2.15 - HTTPRoute Request Mirroring

The HTTPRoute resource allows one or more backendRefs to be provided. Requests will be routed to these upstreams. It is possible to divide the traffic between these backends using Traffic Splitting, but it is also possible to mirror requests to another Service instead. Request mirroring is accomplished using Gateway API’s HTTPRequestMirrorFilter on the HTTPRoute.

When requests are made to a HTTPRoute that uses a HTTPRequestMirrorFilter, the response will never come from the backendRef defined in the filter. Responses from the mirror backendRef are always ignored.

Installation

Follow the steps from the Quickstart to install Envoy Gateway and the example manifest. Before proceeding, you should be able to query the example backend using HTTP.

Mirroring the Traffic

Next, create a new Deployment and Service to mirror requests to. The following example will use a second instance of the application deployed in the quickstart.

kubectl apply -f - <<EOF
---
apiVersion: v1
kind: ServiceAccount
metadata:
  name: backend-2
---
apiVersion: v1
kind: Service
metadata:
  name: backend-2
  labels:
    app: backend-2
    service: backend-2
spec:
  ports:
    - name: http
      port: 3000
      targetPort: 3000
  selector:
    app: backend-2
---
apiVersion: apps/v1
kind: Deployment
metadata:
  name: backend-2
spec:
  replicas: 1
  selector:
    matchLabels:
      app: backend-2
      version: v1
  template:
    metadata:
      labels:
        app: backend-2
        version: v1
    spec:
      serviceAccountName: backend-2
      containers:
        - image: gcr.io/k8s-staging-gateway-api/echo-basic:v20231214-v1.0.0-140-gf544a46e
          imagePullPolicy: IfNotPresent
          name: backend-2
          ports:
            - containerPort: 3000
          env:
            - name: POD_NAME
              valueFrom:
                fieldRef:
                  fieldPath: metadata.name
            - name: NAMESPACE
              valueFrom:
                fieldRef:
                  fieldPath: metadata.namespace
EOF

Then create an HTTPRoute that uses a HTTPRequestMirrorFilter to send requests to the original service from the quickstart, and mirror request to the service that was just deployed.

kubectl apply -f - <<EOF
apiVersion: gateway.networking.k8s.io/v1
kind: HTTPRoute
metadata:
  name: http-mirror
spec:
  parentRefs:
  - name: eg
  hostnames:
  - backends.example
  rules:
  - matches:
    - path:
        type: PathPrefix
        value: /
    filters:
    - type: RequestMirror
      requestMirror:
        backendRef:
          kind: Service
          name: backend-2
          port: 3000
    backendRefs:
    - group: ""
      kind: Service
      name: backend
      port: 3000
EOF

The HTTPRoute status should indicate that it has been accepted and is bound to the example Gateway.

kubectl get httproute/http-mirror -o yaml

Get the Gateway’s address:

export GATEWAY_HOST=$(kubectl get gateway/eg -o jsonpath='{.status.addresses[0].value}')

Querying backends.example/get should result in a 200 response from the example Gateway and the output from the example app should indicate which pod handled the request. There is only one pod in the deployment for the example app from the quickstart, so it will be the same on all subsequent requests.

$ curl -v --header "Host: backends.example" "http://${GATEWAY_HOST}/get"
...
> GET /get HTTP/1.1
> Host: backends.example
> User-Agent: curl/7.81.0
> Accept: */*
> add-header: something
>
* Mark bundle as not supporting multiuse
< HTTP/1.1 200 OK
< content-type: application/json
< x-content-type-options: nosniff
< content-length: 474
< x-envoy-upstream-service-time: 0
< server: envoy
<
...
 "namespace": "default",
 "ingress": "",
 "service": "",
 "pod": "backend-79665566f5-s589f"
...

Check the logs of the pods and you will see that the original deployment and the new deployment each got a request:

$ kubectl logs deploy/backend && kubectl logs deploy/backend-2
...
Starting server, listening on port 3000 (http)
Echoing back request made to /get to client (10.42.0.10:41566)
Starting server, listening on port 3000 (http)
Echoing back request made to /get to client (10.42.0.10:45096)

Multiple BackendRefs

When an HTTPRoute has multiple backendRefs and an HTTPRequestMirrorFilter, traffic splitting will still behave the same as it normally would for the main backendRefs while the backendRef of the HTTPRequestMirrorFilter will continue receiving mirrored copies of the incoming requests.

cat <<EOF | kubectl apply -f -
apiVersion: gateway.networking.k8s.io/v1
kind: HTTPRoute
metadata:
  name: http-mirror
spec:
  parentRefs:
  - name: eg
  hostnames:
  - backends.example
  rules:
  - matches:
    - path:
        type: PathPrefix
        value: /
    filters:
    - type: RequestMirror
      requestMirror:
        backendRef:
          kind: Service
          name: backend-2
          port: 3000
    backendRefs:
    - group: ""
      kind: Service
      name: backend
      port: 3000
    - group: ""
      kind: Service
      name: backend-3
      port: 3000
EOF

Multiple HTTPRequestMirrorFilters

Multiple HTTPRequestMirrorFilters are not supported on the same HTTPRoute rule. When attempting to do so, the admission webhook will reject the configuration.

cat <<EOF | kubectl apply -f -
apiVersion: gateway.networking.k8s.io/v1
kind: HTTPRoute
metadata:
  name: http-mirror
spec:
  parentRefs:
  - name: eg
  hostnames:
  - backends.example
  rules:
  - matches:
    - path:
        type: PathPrefix
        value: /
    filters:
    - type: RequestMirror
      requestMirror:
        backendRef:
          kind: Service
          name: backend-2
          port: 3000
    - type: RequestMirror
      requestMirror:
        backendRef:
          kind: Service
          name: backend-3
          port: 3000
    backendRefs:
    - group: ""
      kind: Service
      name: backend
      port: 3000
EOF
Error from server: error when creating "STDIN": admission webhook "validate.gateway.networking.k8s.io" denied the request: spec.rules[0].filters: Invalid value: "RequestMirror": cannot be used multiple times in the same rule

1.2.16 - HTTPRoute Traffic Splitting

The HTTPRoute resource allows one or more backendRefs to be provided. Requests will be routed to these upstreams if they match the rules of the HTTPRoute. If an invalid backendRef is configured, then HTTP responses will be returned with status code 500 for all requests that would have been sent to that backend.

Installation

Follow the steps from the Quickstart to install Envoy Gateway and the example manifest. Before proceeding, you should be able to query the example backend using HTTP.

Single backendRef

When a single backendRef is configured in a HTTPRoute, it will receive 100% of the traffic.

cat <<EOF | kubectl apply -f -
apiVersion: gateway.networking.k8s.io/v1
kind: HTTPRoute
metadata:
  name: http-headers
spec:
  parentRefs:
  - name: eg
  hostnames:
  - backends.example
  rules:
  - matches:
    - path:
        type: PathPrefix
        value: /
    backendRefs:
    - group: ""
      kind: Service
      name: backend
      port: 3000
EOF

The HTTPRoute status should indicate that it has been accepted and is bound to the example Gateway.

kubectl get httproute/http-headers -o yaml

Get the Gateway’s address:

export GATEWAY_HOST=$(kubectl get gateway/eg -o jsonpath='{.status.addresses[0].value}')

Querying backends.example/get should result in a 200 response from the example Gateway and the output from the example app should indicate which pod handled the request. There is only one pod in the deployment for the example app from the quickstart, so it will be the same on all subsequent requests.

$ curl -vvv --header "Host: backends.example" "http://${GATEWAY_HOST}/get"
...
> GET /get HTTP/1.1
> Host: backends.example
> User-Agent: curl/7.81.0
> Accept: */*
> add-header: something
>
* Mark bundle as not supporting multiuse
< HTTP/1.1 200 OK
< content-type: application/json
< x-content-type-options: nosniff
< content-length: 474
< x-envoy-upstream-service-time: 0
< server: envoy
<
...
 "namespace": "default",
 "ingress": "",
 "service": "",
 "pod": "backend-79665566f5-s589f"
...

Multiple backendRefs

If multiple backendRefs are configured, then traffic will be split between the backendRefs equally unless a weight is configured.

First, create a second instance of the example app from the quickstart:

cat <<EOF | kubectl apply -f -
---
apiVersion: v1
kind: ServiceAccount
metadata:
  name: backend-2
---
apiVersion: v1
kind: Service
metadata:
  name: backend-2
  labels:
    app: backend-2
    service: backend-2
spec:
  ports:
    - name: http
      port: 3000
      targetPort: 3000
  selector:
    app: backend-2
---
apiVersion: apps/v1
kind: Deployment
metadata:
  name: backend-2
spec:
  replicas: 1
  selector:
    matchLabels:
      app: backend-2
      version: v1
  template:
    metadata:
      labels:
        app: backend-2
        version: v1
    spec:
      serviceAccountName: backend-2
      containers:
        - image: gcr.io/k8s-staging-gateway-api/echo-basic:v20231214-v1.0.0-140-gf544a46e
          imagePullPolicy: IfNotPresent
          name: backend-2
          ports:
            - containerPort: 3000
          env:
            - name: POD_NAME
              valueFrom:
                fieldRef:
                  fieldPath: metadata.name
            - name: NAMESPACE
              valueFrom:
                fieldRef:
                  fieldPath: metadata.namespace
EOF

Then create an HTTPRoute that uses both the app from the quickstart and the second instance that was just created

cat <<EOF | kubectl apply -f -
apiVersion: gateway.networking.k8s.io/v1
kind: HTTPRoute
metadata:
  name: http-headers
spec:
  parentRefs:
  - name: eg
  hostnames:
  - backends.example
  rules:
  - matches:
    - path:
        type: PathPrefix
        value: /
    backendRefs:
    - group: ""
      kind: Service
      name: backend
      port: 3000
    - group: ""
      kind: Service
      name: backend-2
      port: 3000
EOF

Querying backends.example/get should result in 200 responses from the example Gateway and the output from the example app that indicates which pod handled the request should switch between the first pod and the second one from the new deployment on subsequent requests.

$ curl -vvv --header "Host: backends.example" "http://${GATEWAY_HOST}/get"
...
> GET /get HTTP/1.1
> Host: backends.example
> User-Agent: curl/7.81.0
> Accept: */*
> add-header: something
>
* Mark bundle as not supporting multiuse
< HTTP/1.1 200 OK
< content-type: application/json
< x-content-type-options: nosniff
< content-length: 474
< x-envoy-upstream-service-time: 0
< server: envoy
<
...
 "namespace": "default",
 "ingress": "",
 "service": "",
 "pod": "backend-75bcd4c969-lsxpz"
...

Weighted backendRefs

If multiple backendRefs are configured and an un-even traffic split between the backends is desired, then the weight field can be used to control the weight of requests to each backend. If weight is not configured for a backendRef it is assumed to be 1.

The weight field in a backendRef controls the distribution of the traffic split. The proportion of requests to a single backendRef is calculated by dividing its weight by the sum of all backendRef weights in the HTTPRoute. The weight is not a percentage and the sum of all weights does not need to add up to 100.

The HTTPRoute below will configure the gateway to send 80% of the traffic to the backend service, and 20% to the backend-2 service.

cat <<EOF | kubectl apply -f -
apiVersion: gateway.networking.k8s.io/v1
kind: HTTPRoute
metadata:
  name: http-headers
spec:
  parentRefs:
  - name: eg
  hostnames:
  - backends.example
  rules:
  - matches:
    - path:
        type: PathPrefix
        value: /
    backendRefs:
    - group: ""
      kind: Service
      name: backend
      port: 3000
      weight: 8
    - group: ""
      kind: Service
      name: backend-2
      port: 3000
      weight: 2
EOF

Invalid backendRefs

backendRefs can be considered invalid for the following reasons:

  • The group field is configured to something other than "". Currently, only the core API group (specified by omitting the group field or setting it to an empty string) is supported
  • The kind field is configured to anything other than Service. Envoy Gateway currently only supports Kubernetes Service backendRefs
  • The backendRef configures a service with a namespace not permitted by any existing ReferenceGrants
  • The port field is not configured or is configured to a port that does not exist on the Service
  • The named Service configured by the backendRef cannot be found

Modifying the above example to make the backend-2 backendRef invalid by using a port that does not exist on the Service will result in 80% of the traffic being sent to the backend service, and 20% of the traffic receiving an HTTP response with status code 500.

cat <<EOF | kubectl apply -f -
apiVersion: gateway.networking.k8s.io/v1
kind: HTTPRoute
metadata:
  name: http-headers
spec:
  parentRefs:
  - name: eg
  hostnames:
  - backends.example
  rules:
  - matches:
    - path:
        type: PathPrefix
        value: /
    backendRefs:
    - group: ""
      kind: Service
      name: backend
      port: 3000
      weight: 8
    - group: ""
      kind: Service
      name: backend-2
      port: 9000
      weight: 2
EOF

Querying backends.example/get should result in 200 responses 80% of the time, and 500 responses 20% of the time.

$ curl -vvv --header "Host: backends.example" "http://${GATEWAY_HOST}/get"
> GET /get HTTP/1.1
> Host: backends.example
> User-Agent: curl/7.81.0
> Accept: */*
>
* Mark bundle as not supporting multiuse
< HTTP/1.1 500 Internal Server Error
< server: envoy
< content-length: 0
<

1.2.17 - Local Rate Limit

Rate limit is a feature that allows the user to limit the number of incoming requests to a predefined value based on attributes within the traffic flow.

Here are some reasons why you may want to implement Rate limits

  • To prevent malicious activity such as DDoS attacks.
  • To prevent applications and its resources (such as a database) from getting overloaded.
  • To create API limits based on user entitlements.

Envoy Gateway supports two types of rate limiting: Global rate limiting and Local rate limiting.

Local rate limiting applies rate limits to the traffic flowing through a single instance of Envoy proxy. This means that if the data plane has 2 replicas of Envoy running, and the rate limit is 10 requests/second, each replica will allow 10 requests/second. This is in contrast to Global Rate Limiting which applies rate limits to the traffic flowing through all instances of Envoy proxy.

Envoy Gateway introduces a new CRD called BackendTrafficPolicy that allows the user to describe their rate limit intent. This instantiated resource can be linked to a Gateway, HTTPRoute or GRPCRoute resource.

Note: Limit is applied per route. Even if a BackendTrafficPolicy targets a gateway, each route in that gateway still has a separate rate limit bucket. For example, if a gateway has 2 routes, and the limit is 100r/s, then each route has its own 100r/s rate limit bucket.

Prerequisites

Install Envoy Gateway

  • Follow the steps from the Quickstart to install Envoy Gateway and the HTTPRoute example manifest. Before proceeding, you should be able to query the example backend using HTTP.

Rate Limit Specific User

Here is an example of a rate limit implemented by the application developer to limit a specific user by matching on a custom x-user-id header with a value set to one.

cat <<EOF | kubectl apply -f -
apiVersion: gateway.envoyproxy.io/v1alpha1
kind: BackendTrafficPolicy 
metadata:
  name: policy-httproute
spec:
  targetRef:
    group: gateway.networking.k8s.io
    kind: HTTPRoute
    name: http-ratelimit
    namespace: default
  rateLimit:
    type: Local
    local:
      rules:
      - clientSelectors:
        - headers:
          - name: x-user-id
            value: one
        limit:
          requests: 3
          unit: Hour
EOF

HTTPRoute

cat <<EOF | kubectl apply -f -
apiVersion: gateway.networking.k8s.io/v1
kind: HTTPRoute
metadata:
  name: http-ratelimit
spec:
  parentRefs:
  - name: eg
  hostnames:
  - ratelimit.example 
  rules:
  - matches:
    - path:
        type: PathPrefix
        value: /
    backendRefs:
    - group: ""
      kind: Service
      name: backend
      port: 3000
EOF

The HTTPRoute status should indicate that it has been accepted and is bound to the example Gateway.

kubectl get httproute/http-ratelimit -o yaml

Get the Gateway’s address:

export GATEWAY_HOST=$(kubectl get gateway/eg -o jsonpath='{.status.addresses[0].value}')

Let’s query ratelimit.example/get 4 times. We should receive a 200 response from the example Gateway for the first 3 requests and then receive a 429 status code for the 4th request since the limit is set at 3 requests/Hour for the request which contains the header x-user-id and value one.

for i in {1..4}; do curl -I --header "Host: ratelimit.example" --header "x-user-id: one" http://${GATEWAY_HOST}/get ; sleep 1; done
HTTP/1.1 200 OK
content-type: application/json
x-content-type-options: nosniff
date: Wed, 08 Feb 2023 02:33:31 GMT
content-length: 460
x-envoy-upstream-service-time: 4
server: envoy

HTTP/1.1 200 OK
content-type: application/json
x-content-type-options: nosniff
date: Wed, 08 Feb 2023 02:33:32 GMT
content-length: 460
x-envoy-upstream-service-time: 2
server: envoy

HTTP/1.1 200 OK
content-type: application/json
x-content-type-options: nosniff
date: Wed, 08 Feb 2023 02:33:33 GMT
content-length: 460
x-envoy-upstream-service-time: 0
server: envoy

HTTP/1.1 429 Too Many Requests
x-envoy-ratelimited: true
date: Wed, 08 Feb 2023 02:33:34 GMT
server: envoy
transfer-encoding: chunked

You should be able to send requests with the x-user-id header and a different value and receive successful responses from the server.

for i in {1..4}; do curl -I --header "Host: ratelimit.example" --header "x-user-id: two" http://${GATEWAY_HOST}/get ; sleep 1; done
HTTP/1.1 200 OK
content-type: application/json
x-content-type-options: nosniff
date: Wed, 08 Feb 2023 02:34:36 GMT
content-length: 460
x-envoy-upstream-service-time: 0
server: envoy

HTTP/1.1 200 OK
content-type: application/json
x-content-type-options: nosniff
date: Wed, 08 Feb 2023 02:34:37 GMT
content-length: 460
x-envoy-upstream-service-time: 0
server: envoy

HTTP/1.1 200 OK
content-type: application/json
x-content-type-options: nosniff
date: Wed, 08 Feb 2023 02:34:38 GMT
content-length: 460
x-envoy-upstream-service-time: 0
server: envoy

HTTP/1.1 200 OK
content-type: application/json
x-content-type-options: nosniff
date: Wed, 08 Feb 2023 02:34:39 GMT
content-length: 460
x-envoy-upstream-service-time: 0
server: envoy

Rate Limit All Requests

This example shows you how to rate limit all requests matching the HTTPRoute rule at 3 requests/Hour by leaving the clientSelectors field unset.

cat <<EOF | kubectl apply -f -
apiVersion: gateway.envoyproxy.io/v1alpha1
kind: BackendTrafficPolicy 
metadata:
  name: policy-httproute
spec:
  targetRef:
    group: gateway.networking.k8s.io
    kind: HTTPRoute
    name: http-ratelimit
    namespace: default
  rateLimit:
    type: Local
    local:
      rules:
      - limit:
          requests: 3
          unit: Hour
EOF

HTTPRoute

cat <<EOF | kubectl apply -f -
apiVersion: gateway.networking.k8s.io/v1
kind: HTTPRoute
metadata:
  name: http-ratelimit
spec:
  parentRefs:
  - name: eg
  hostnames:
  - ratelimit.example 
  rules:
  - matches:
    - path:
        type: PathPrefix
        value: /
    backendRefs:
    - group: ""
      kind: Service
      name: backend
      port: 3000
EOF
for i in {1..4}; do curl -I --header "Host: ratelimit.example" http://${GATEWAY_HOST}/get ; sleep 1; done
HTTP/1.1 200 OK
content-type: application/json
x-content-type-options: nosniff
date: Wed, 08 Feb 2023 02:33:31 GMT
content-length: 460
x-envoy-upstream-service-time: 4
server: envoy

HTTP/1.1 200 OK
content-type: application/json
x-content-type-options: nosniff
date: Wed, 08 Feb 2023 02:33:32 GMT
content-length: 460
x-envoy-upstream-service-time: 2
server: envoy

HTTP/1.1 200 OK
content-type: application/json
x-content-type-options: nosniff
date: Wed, 08 Feb 2023 02:33:33 GMT
content-length: 460
x-envoy-upstream-service-time: 0
server: envoy

HTTP/1.1 429 Too Many Requests
x-envoy-ratelimited: true
date: Wed, 08 Feb 2023 02:33:34 GMT
server: envoy
transfer-encoding: chunked

Note: Local rate limiting does not support distinct matching. If you want to rate limit based on distinct values, you should use Global Rate Limiting.

1.2.18 - Multicluster Service Routing

The Multicluster Service API ServiceImport object can be used as part of the GatewayAPI backendRef for configuring routes. For more information about multicluster service API follow sig documentation.

We will use Submariner project for setting up the multicluster environment for exporting the service to be routed from peer clusters.

Setting KIND clusters and installing Submariner.

  • We will be using KIND clusters to demonstrate this example.
git clone https://github.com/submariner-io/submariner-operator
cd submariner-operator
make clusters

Note: remain in submariner-operator directory for the rest of the steps in this section

  • Install subctl:
curl -Ls https://get.submariner.io  | VERSION=v0.14.6 bash
  • Set up multicluster service API and submariner for cross cluster traffic using ServiceImport
subctl deploy-broker --kubeconfig output/kubeconfigs/kind-config-cluster1 --globalnet
subctl join --kubeconfig output/kubeconfigs/kind-config-cluster1 broker-info.subm --clusterid cluster1 --natt=false
subctl join --kubeconfig output/kubeconfigs/kind-config-cluster2 broker-info.subm --clusterid cluster2 --natt=false

Once the above steps are done and all the pods are up in both the clusters. We are ready for installing envoy gateway.

Install EnvoyGateway

Install the Gateway API CRDs and Envoy Gateway in cluster1:

helm install eg oci://docker.io/envoyproxy/gateway-helm --version v1.0.2 -n envoy-gateway-system --create-namespace --kubeconfig output/kubeconfigs/kind-config-cluster1

Wait for Envoy Gateway to become available:

kubectl wait --timeout=5m -n envoy-gateway-system deployment/envoy-gateway --for=condition=Available --kubeconfig output/kubeconfigs/kind-config-cluster1

Install Application

Install the backend application in cluster2 and export it through subctl command.

kubectl apply -f https://raw.githubusercontent.com/envoyproxy/gateway/latest/examples/kubernetes/application.yaml --kubeconfig output/kubeconfigs/kind-config-cluster2
subctl export service backend --namespace default --kubeconfig output/kubeconfigs/kind-config-cluster2

Create Gateway API Objects

Create the Gateway API objects GatewayClass, Gateway and HTTPRoute in cluster1 to set up the routing.

kubectl apply -f https://raw.githubusercontent.com/envoyproxy/gateway/latest/examples/kubernetes/multicluster-service.yaml --kubeconfig output/kubeconfigs/kind-config-cluster1

Testing the Configuration

Get the name of the Envoy service created the by the example Gateway:

export ENVOY_SERVICE=$(kubectl get svc -n envoy-gateway-system --selector=gateway.envoyproxy.io/owning-gateway-namespace=default,gateway.envoyproxy.io/owning-gateway-name=eg -o jsonpath='{.items[0].metadata.name}')

Port forward to the Envoy service:

kubectl -n envoy-gateway-system port-forward service/${ENVOY_SERVICE} 8888:80 &

Curl the example app through Envoy proxy:

curl --verbose --header "Host: www.example.com" http://localhost:8888/get

1.2.19 - Retry

A retry setting specifies the maximum number of times an Envoy proxy attempts to connect to a service if the initial call fails. Retries can enhance service availability and application performance by making sure that calls don’t fail permanently because of transient problems such as a temporarily overloaded service or network. The interval between retries prevents the called service from being overwhelmed with requests.

Envoy Gateway supports the following retry settings:

  • NumRetries: is the number of retries to be attempted. Defaults to 2.
  • RetryOn: specifies the retry trigger condition.
  • PerRetryPolicy: is the retry policy to be applied per retry attempt.

Envoy Gateway introduces a new CRD called BackendTrafficPolicy that allows the user to describe their desired retry settings. This instantiated resource can be linked to a Gateway, HTTPRoute or GRPCRoute resource.

Note: There are distinct circuit breaker counters for each BackendReference in an xRoute rule. Even if a BackendTrafficPolicy targets a Gateway, each BackendReference in that gateway still has separate circuit breaker counter.

Prerequisites

Follow the installation step from the Quickstart to install Envoy Gateway and sample resources.

Test and customize retry settings

Before applying a BackendTrafficPolicy with retry setting to a route, let’s test the default retry settings.

curl -v -H "Host: www.example.com" "http://${GATEWAY_HOST}/status/500"

It will return 500 response immediately.

*   Trying 172.18.255.200:80...
* Connected to 172.18.255.200 (172.18.255.200) port 80
> GET /status/500 HTTP/1.1
> Host: www.example.com
> User-Agent: curl/8.4.0
> Accept: */*
>
< HTTP/1.1 500 Internal Server Error
< date: Fri, 01 Mar 2024 15:12:55 GMT
< content-length: 0
<
* Connection #0 to host 172.18.255.200 left intact

Let’s create a BackendTrafficPolicy with a retry setting.

The request will be retried 5 times with a 100ms base interval and a 10s maximum interval.

cat <<EOF | kubectl apply -f -
apiVersion: gateway.envoyproxy.io/v1alpha1
kind: BackendTrafficPolicy
metadata:
  name: retry-for-route
spec:
  targetRef:
    group: gateway.networking.k8s.io
    kind: HTTPRoute
    name: backend
    namespace: default
  retry:
    numRetries: 5
    perRetry:
      backOff:
        baseInterval: 100ms
        maxInterval: 10s
      timeout: 250ms
    retryOn:
      httpStatusCodes:
        - 500
      triggers:
        - connect-failure
        - retriable-status-codes
EOF

Execute the test again.

curl -v -H "Host: www.example.com" "http://${GATEWAY_HOST}/status/500"

It will return 500 response after a few while.

*   Trying 172.18.255.200:80...
* Connected to 172.18.255.200 (172.18.255.200) port 80
> GET /status/500 HTTP/1.1
> Host: www.example.com
> User-Agent: curl/8.4.0
> Accept: */*
>
< HTTP/1.1 500 Internal Server Error
< date: Fri, 01 Mar 2024 15:15:53 GMT
< content-length: 0
<
* Connection #0 to host 172.18.255.200 left intact

Let’s check the stats to see the retry behavior.

egctl x stats envoy-proxy -n envoy-gateway-system -l gateway.envoyproxy.io/owning-gateway-name=eg,gateway.envoyproxy.io/owning-gateway-namespace=default | grep "envoy_cluster_upstream_rq_retry{envoy_cluster_name=\"httproute/default/backend/rule/0\"}"

You will expect to see the stats.

envoy_cluster_upstream_rq_retry{envoy_cluster_name="httproute/default/backend/rule/0"} 5

1.2.20 - Routing outside Kubernetes

Routing to endpoints outside the Kubernetes cluster where Envoy Gateway and its corresponding Envoy Proxy fleet is running is a common use case. This can be achieved by defining FQDN addresses in a EndpointSlice.

Installation

Follow the steps from the Quickstart to install Envoy Gateway and the example manifest. Before proceeding, you should be able to query the example backend using HTTP.

Configuration

Define a Service and EndpointSlice that represents https://httpbin.org

cat <<EOF | kubectl apply -f -
apiVersion: v1
kind: Service
metadata:
  name: httpbin
  namespace: default
spec:
  ports:
    - port: 443
      protocol: TCP
      targetPort: 443
      name: https
---
apiVersion: discovery.k8s.io/v1
kind: EndpointSlice
metadata:
  name: httpbin
  namespace: default
  labels:
    kubernetes.io/service-name: httpbin 
addressType: FQDN
ports:
- name: https
  protocol: TCP
  port: 443
endpoints:
- addresses:
  - "httpbin.org"
EOF

Update the Gateway to include a TLS Listener on port 443

kubectl patch gateway eg --type=json --patch '
  - op: add
    path: /spec/listeners/-
    value:
      name: tls
      protocol: TLS
      port: 443
      tls:
        mode: Passthrough
  '

Add a TLSRoute that can route incoming traffic to the above backend that we created

cat <<EOF | kubectl apply -f -
apiVersion: gateway.networking.k8s.io/v1alpha2
kind: TLSRoute
metadata:
  name: httpbin 
spec:
  parentRefs:
  - name: eg 
    sectionName: tls
  rules:
  - backendRefs:
    - name: httpbin
      port: 443
EOF

Get the Gateway address:

export GATEWAY_HOST=$(kubectl get gateway/eg -o jsonpath='{.status.addresses[0].value}')

Send a request and view the response:

curl -I -HHost:httpbin.org --resolve "httpbin.org:443:${GATEWAY_HOST}" https://httpbin.org/

1.2.21 - TCP Routing

TCPRoute provides a way to route TCP requests. When combined with a Gateway listener, it can be used to forward connections on the port specified by the listener to a set of backends specified by the TCPRoute. To learn more about HTTP routing, refer to the Gateway API documentation.

Installation

Follow the steps from the Quickstart guide to install Envoy Gateway and the example manifest. Before proceeding, you should be able to query the example backend using HTTP.

Configuration

In this example, we have one Gateway resource and two TCPRoute resources that distribute the traffic with the following rules:

All TCP streams on port 8088 of the Gateway are forwarded to port 3001 of foo Kubernetes Service. All TCP streams on port 8089 of the Gateway are forwarded to port 3002 of bar Kubernetes Service. In this example two TCP listeners will be applied to the Gateway in order to route them to two separate backend TCPRoutes, note that the protocol set for the listeners on the Gateway is TCP:

Install the GatewayClass and a tcp-gateway Gateway first.

cat <<EOF | kubectl apply -f -
kind: GatewayClass
apiVersion: gateway.networking.k8s.io/v1
metadata:
  name: eg
spec:
  controllerName: gateway.envoyproxy.io/gatewayclass-controller
---
apiVersion: gateway.networking.k8s.io/v1
kind: Gateway
metadata:
  name: tcp-gateway
spec:
  gatewayClassName: eg
  listeners:
  - name: foo
    protocol: TCP
    port: 8088
    allowedRoutes:
      kinds:
      - kind: TCPRoute
  - name: bar
    protocol: TCP
    port: 8089
    allowedRoutes:
      kinds:
      - kind: TCPRoute
EOF

Install two services foo and bar, which are binded to backend-1 and backend-2.

cat <<EOF | kubectl apply -f -
apiVersion: v1
kind: Service
metadata:
  name: foo
  labels:
    app: backend-1
spec:
  ports:
    - name: http
      port: 3001
      targetPort: 3000
  selector:
    app: backend-1
---
apiVersion: v1
kind: Service
metadata:
  name: bar
  labels:
    app: backend-2
spec:
  ports:
    - name: http
      port: 3002
      targetPort: 3000
  selector:
    app: backend-2
---
apiVersion: apps/v1
kind: Deployment
metadata:
  name: backend-1
spec:
  replicas: 1
  selector:
    matchLabels:
      app: backend-1
      version: v1
  template:
    metadata:
      labels:
        app: backend-1
        version: v1
    spec:
      containers:
        - image: gcr.io/k8s-staging-gateway-api/echo-basic:v20231214-v1.0.0-140-gf544a46e
          imagePullPolicy: IfNotPresent
          name: backend-1
          ports:
            - containerPort: 3000
          env:
            - name: POD_NAME
              valueFrom:
                fieldRef:
                  fieldPath: metadata.name
            - name: NAMESPACE
              valueFrom:
                fieldRef:
                  fieldPath: metadata.namespace
            - name: SERVICE_NAME
              value: foo
---
apiVersion: apps/v1
kind: Deployment
metadata:
  name: backend-2
spec:
  replicas: 1
  selector:
    matchLabels:
      app: backend-2
      version: v1
  template:
    metadata:
      labels:
        app: backend-2
        version: v1
    spec:
      containers:
        - image: gcr.io/k8s-staging-gateway-api/echo-basic:v20231214-v1.0.0-140-gf544a46e
          imagePullPolicy: IfNotPresent
          name: backend-2
          ports:
            - containerPort: 3000
          env:
            - name: POD_NAME
              valueFrom:
                fieldRef:
                  fieldPath: metadata.name
            - name: NAMESPACE
              valueFrom:
                fieldRef:
                  fieldPath: metadata.namespace
            - name: SERVICE_NAME
              value: bar
EOF

Install two TCPRoutes tcp-app-1 and tcp-app-2 with different sectionName:

cat <<EOF | kubectl apply -f -
apiVersion: gateway.networking.k8s.io/v1alpha2
kind: TCPRoute
metadata:
  name: tcp-app-1
spec:
  parentRefs:
  - name: tcp-gateway
    sectionName: foo
  rules:
  - backendRefs:
    - name: foo
      port: 3001
---
apiVersion: gateway.networking.k8s.io/v1alpha2
kind: TCPRoute
metadata:
  name: tcp-app-2
spec:
  parentRefs:
  - name: tcp-gateway
    sectionName: bar
  rules:
  - backendRefs:
    - name: bar
      port: 3002
EOF

In the above example we separate the traffic for the two separate backend TCP Services by using the sectionName field in the parentRefs:

spec:
  parentRefs:
  - name: tcp-gateway
    sectionName: foo

This corresponds directly with the name in the listeners in the Gateway:

  listeners:
  - name: foo
    protocol: TCP
    port: 8088
  - name: bar
    protocol: TCP
    port: 8089

In this way each TCPRoute “attaches” itself to a different port on the Gateway so that the foo service is taking traffic for port 8088 from outside the cluster and bar service takes the port 8089 traffic.

Before testing, please get the tcp-gateway Gateway’s address first:

export GATEWAY_HOST=$(kubectl get gateway/tcp-gateway -o jsonpath='{.status.addresses[0].value}')

You can try to use nc to test the TCP connections of envoy gateway with different ports, and you can see them succeeded:

nc -zv ${GATEWAY_HOST} 8088

nc -zv ${GATEWAY_HOST} 8089

You can also try to send requests to envoy gateway and get responses as shown below:

curl -i "http://${GATEWAY_HOST}:8088"

HTTP/1.1 200 OK
Content-Type: application/json
X-Content-Type-Options: nosniff
Date: Tue, 03 Jan 2023 10:18:36 GMT
Content-Length: 267

{
 "path": "/",
 "host": "xxx.xxx.xxx.xxx:8088",
 "method": "GET",
 "proto": "HTTP/1.1",
 "headers": {
  "Accept": [
   "*/*"
  ],
  "User-Agent": [
   "curl/7.85.0"
  ]
 },
 "namespace": "default",
 "ingress": "",
 "service": "foo",
 "pod": "backend-1-c6c5fb958-dl8vl"
}

You can see that the traffic routing to foo service when sending request to 8088 port.

curl -i "http://${GATEWAY_HOST}:8089"

HTTP/1.1 200 OK
Content-Type: application/json
X-Content-Type-Options: nosniff
Date: Tue, 03 Jan 2023 10:19:28 GMT
Content-Length: 267

{
 "path": "/",
 "host": "xxx.xxx.xxx.xxx:8089",
 "method": "GET",
 "proto": "HTTP/1.1",
 "headers": {
  "Accept": [
   "*/*"
  ],
  "User-Agent": [
   "curl/7.85.0"
  ]
 },
 "namespace": "default",
 "ingress": "",
 "service": "bar",
 "pod": "backend-2-98fcff498-hcmgb"
}                                            

You can see that the traffic routing to bar service when sending request to 8089 port.

1.2.22 - UDP Routing

The UDPRoute resource allows users to configure UDP routing by matching UDP traffic and forwarding it to Kubernetes backends. This task will use CoreDNS example to walk you through the steps required to configure UDPRoute on Envoy Gateway.

Note: UDPRoute allows Envoy Gateway to operate as a non-transparent proxy between a UDP client and server. The lack of transparency means that the upstream server will see the source IP and port of the Gateway instead of the client. For additional information, refer to Envoy’s UDP proxy documentation.

Prerequisites

Follow the steps from the Quickstart to install Envoy Gateway and the example manifest. Before proceeding, you should be able to query the example backend using HTTP.

Installation

Install CoreDNS in the Kubernetes cluster as the example backend. The installed CoreDNS is listening on UDP port 53 for DNS lookups.

kubectl apply -f https://raw.githubusercontent.com/envoyproxy/gateway/latest/examples/kubernetes/udp-routing-example-backend.yaml

Wait for the CoreDNS deployment to become available:

kubectl wait --timeout=5m deployment/coredns --for=condition=Available

Update the Gateway from the Quickstart to include a UDP listener that listens on UDP port 5300:

kubectl patch gateway eg --type=json --patch '
  - op: add
    path: /spec/listeners/-
    value:
      name: coredns
      protocol: UDP
      port: 5300
      allowedRoutes:
        kinds:
        - kind: UDPRoute
  '

Verify the Gateway status:

kubectl get gateway/eg -o yaml

Configuration

Create a UDPRoute resource to route UDP traffic received on Gateway port 5300 to the CoredDNS backend.

cat <<EOF | kubectl apply -f -
apiVersion: gateway.networking.k8s.io/v1alpha2
kind: UDPRoute
metadata:
  name: coredns
spec:
  parentRefs:
    - name: eg
      sectionName: coredns
  rules:
    - backendRefs:
        - name: coredns
          port: 53
EOF

Verify the UDPRoute status:

kubectl get udproute/coredns -o yaml

Testing

Get the External IP of the Gateway:

export GATEWAY_HOST=$(kubectl get gateway/eg -o jsonpath='{.status.addresses[0].value}')

Use dig command to query the dns entry foo.bar.com through the Gateway.

dig @${GATEWAY_HOST} -p 5300 foo.bar.com

You should see the result of the dns query as the below output, which means that the dns query has been successfully routed to the backend CoreDNS.

Note: 49.51.177.138 is the resolved address of GATEWAY_HOST.

; <<>> DiG 9.18.1-1ubuntu1.1-Ubuntu <<>> @49.51.177.138 -p 5300 foo.bar.com
; (1 server found)
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 58125
;; flags: qr aa rd; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 3
;; WARNING: recursion requested but not available

;; OPT PSEUDOSECTION:
; EDNS: version: 0, flags:; udp: 1232
; COOKIE: 24fb86eba96ebf62 (echoed)
;; QUESTION SECTION:
;foo.bar.com.			IN	A

;; ADDITIONAL SECTION:
foo.bar.com.		0	IN	A	10.244.0.19
_udp.foo.bar.com.	0	IN	SRV	0 0 42376 .

;; Query time: 1 msec
;; SERVER: 49.51.177.138#5300(49.51.177.138) (UDP)
;; WHEN: Fri Jan 13 10:20:34 UTC 2023
;; MSG SIZE  rcvd: 114

Clean-Up

Follow the steps from the Quickstart to uninstall Envoy Gateway.

Delete the CoreDNS example manifest and the UDPRoute:

kubectl delete deploy/coredns
kubectl delete service/coredns
kubectl delete cm/coredns
kubectl delete udproute/coredns

Next Steps

Checkout the Developer Guide to get involved in the project.

1.3 - Security

This section includes security-related tasks.

1.3.1 - Backend TLS: Gateway to Backend

This task demonstrates how TLS can be achieved between the Gateway and a backend. This task uses a self-signed CA, so it should be used for testing and demonstration purposes only.

Envoy Gateway supports the Gateway-API defined BackendTLSPolicy.

Prerequisites

  • OpenSSL to generate TLS assets.

Installation

Follow the steps from the Quickstart to install Envoy Gateway and the example manifest.

TLS Certificates

Generate the certificates and keys used by the backend to terminate TLS connections from the Gateways.

Create a root certificate and private key to sign certificates:

openssl req -x509 -sha256 -nodes -days 365 -newkey rsa:2048 -subj '/O=example Inc./CN=example.com' -keyout ca.key -out ca.crt

Create a certificate and a private key for www.example.com.

First, create an openssl configuration file:

cat > openssl.conf  <<EOF
[req]
req_extensions = v3_req
prompt = no

[v3_req]
keyUsage = keyEncipherment, digitalSignature
extendedKeyUsage = serverAuth
subjectAltName = @alt_names
[alt_names]
DNS.1 = www.example.com
EOF

Then create a certificate using this openssl configuration file:

openssl req -out www.example.com.csr -newkey rsa:2048 -nodes -keyout www.example.com.key -subj "/CN=www.example.com/O=example organization"
openssl x509 -req -days 365 -CA ca.crt -CAkey ca.key -set_serial 0 -in www.example.com.csr -out www.example.com.crt -extfile openssl.conf -extensions v3_req

Store the cert/key in a Secret:

kubectl create secret tls example-cert --key=www.example.com.key --cert=www.example.com.crt

Store the CA Cert in another Secret:

kubectl create configmap example-ca --from-file=ca.crt

Setup TLS on the backend

Patch the existing quickstart backend to enable TLS. The patch will mount the TLS certificate secret into the backend as volume.

kubectl patch deployment backend --type=json --patch '
  - op: add
    path: /spec/template/spec/containers/0/volumeMounts
    value:
    - name: secret-volume
      mountPath: /etc/secret-volume
  - op: add
    path: /spec/template/spec/volumes
    value:
    - name: secret-volume
      secret:
        secretName: example-cert
        items:
        - key: tls.crt
          path: crt
        - key: tls.key
          path: key
  - op: add
    path: /spec/template/spec/containers/0/env/-
    value:
      name: TLS_SERVER_CERT
      value: /etc/secret-volume/crt
  - op: add
    path: /spec/template/spec/containers/0/env/-
    value:
      name: TLS_SERVER_PRIVKEY
      value: /etc/secret-volume/key
  '

Create a service that exposes port 443 on the backend service.

cat <<EOF | kubectl apply -f -
apiVersion: v1
kind: Service
metadata:
  labels:
    app: backend
    service: backend
  name: tls-backend
  namespace: default
spec:
  selector:
    app: backend
  ports:
  - name: https
    port: 443
    protocol: TCP
    targetPort: 8443
EOF

Create a BackendTLSPolicy instructing Envoy Gateway to establish a TLS connection with the backend and validate the backend certificate is issued by a trusted CA and contains an appropriate DNS SAN.

cat <<EOF | kubectl apply -f -
apiVersion: gateway.networking.k8s.io/v1alpha2
kind: BackendTLSPolicy
metadata:
  name: enable-backend-tls
  namespace: default
spec:
  targetRef:
    group: ''
    kind: Service
    name: tls-backend
    sectionName: "443"
  tls:
    caCertRefs:
    - name: example-ca
      group: ''
      kind: ConfigMap
    hostname: www.example.com
EOF

Patch the HTTPRoute’s backend reference, so that it refers to the new TLS-enabled service:

kubectl patch HTTPRoute backend --type=json --patch '
  - op: replace
    path: /spec/rules/0/backendRefs/0/port
    value: 443
  - op: replace
    path: /spec/rules/0/backendRefs/0/name
    value: tls-backend
  '

Verify the HTTPRoute status:

kubectl get HTTPRoute backend -o yaml

Testing

Clusters without External LoadBalancer Support

Get the name of the Envoy service created the by the example Gateway:

export ENVOY_SERVICE=$(kubectl get svc -n envoy-gateway-system --selector=gateway.envoyproxy.io/owning-gateway-namespace=default,gateway.envoyproxy.io/owning-gateway-name=eg -o jsonpath='{.items[0].metadata.name}')

Port forward to the Envoy service:

kubectl -n envoy-gateway-system port-forward service/${ENVOY_SERVICE} 80:80 &

Query the TLS-enabled backend through Envoy proxy:

curl -v -HHost:www.example.com --resolve "www.example.com:80:127.0.0.1" \
http://www.example.com:80/get

Inspect the output and see that the response contains the details of the TLS handshake between Envoy and the backend:

< HTTP/1.1 200 OK
[...]
 "tls": {
  "version": "TLSv1.2",
  "serverName": "www.example.com",
  "negotiatedProtocol": "http/1.1",
  "cipherSuite": "TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256"
 }

Clusters with External LoadBalancer Support

Get the External IP of the Gateway:

export GATEWAY_HOST=$(kubectl get gateway/eg -o jsonpath='{.status.addresses[0].value}')

Query the example app through the Gateway:

curl -v -HHost:www.example.com --resolve "www.example.com:80:${GATEWAY_HOST}" \
http://www.example.com:80/get

Inspect the output and see that the response contains the details of the TLS handshake between Envoy and the backend:

< HTTP/1.1 200 OK
[...]
 "tls": {
  "version": "TLSv1.2",
  "serverName": "www.example.com",
  "negotiatedProtocol": "http/1.1",
  "cipherSuite": "TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256"
 }

1.3.2 - Basic Authentication

This task provides instructions for configuring HTTP Basic authentication. HTTP Basic authentication checks if an incoming request has a valid username and password before routing the request to a backend service.

Envoy Gateway introduces a new CRD called SecurityPolicy that allows the user to configure HTTP Basic authentication. This instantiated resource can be linked to a Gateway, HTTPRoute or GRPCRoute resource.

Prerequisites

Follow the steps from the Quickstart to install Envoy Gateway and the example manifest. Before proceeding, you should be able to query the example backend using HTTP.

Configuration

Envoy Gateway uses .htpasswd format to store the username-password pairs for authentication. The file must be stored in a kubernetes secret and referenced in the SecurityPolicy configuration. The secret is an Opaque secret, and the username-password pairs must be stored in the key “.htpasswd”.

Create a root certificate

Create a root certificate and private key to sign certificates:

openssl req -x509 -sha256 -nodes -days 365 -newkey rsa:2048 -subj '/O=example Inc./CN=example.com' -keyout example.com.key -out example.com.crt

Create a certificate secret

Create a certificate and a private key for www.example.com:

openssl req -out www.example.com.csr -newkey rsa:2048 -nodes -keyout www.example.com.key -subj "/CN=www.example.com/O=example organization"
openssl x509 -req -days 365 -CA example.com.crt -CAkey example.com.key -set_serial 0 -in www.example.com.csr -out www.example.com.crt

Create certificate

kubectl create secret tls example-cert --key=www.example.com.key --cert=www.example.com.crt

Enable HTTPS

Update the Gateway from the Quickstart to include an HTTPS listener that listens on port 443 and references the example-cert Secret:

kubectl patch gateway eg --type=json --patch '
  - op: add
    path: /spec/listeners/-
    value:
      name: https
      protocol: HTTPS
      port: 443
      tls:
        mode: Terminate
        certificateRefs:
          - kind: Secret
            group: ""
            name: example-cert
  '

Create a .htpasswd file

First, create a .htpasswd file with the username and password you want to use for authentication.

Note: Please always use HTTPS with Basic Authentication. This prevents credentials from being transmitted in plain text.

The input password won’t be saved, instead, a hash will be generated and saved in the output file. When a request tries to access protected resources, the password in the “Authorization” HTTP header will be hashed and compared with the saved hash.

Note: only SHA hash algorithm is supported for now.

htpasswd -cbs .htpasswd foo bar

You can also add more users to the file:

htpasswd -bs .htpasswd foo1 bar1

Create a basic-auth secret

Next, create a kubernetes secret with the generated .htpasswd file in the previous step.

kubectl create secret generic basic-auth --from-file=.htpasswd

Create a SecurityPolicy

The below example defines a SecurityPolicy that authenticates requests against the user list in the kubernetes secret generated in the previous step.

cat <<EOF | kubectl apply -f -
apiVersion: gateway.envoyproxy.io/v1alpha1
kind: SecurityPolicy
metadata:
  name: basic-auth-example
spec:
  targetRef:
    group: gateway.networking.k8s.io
    kind: HTTPRoute
    name: backend
  basicAuth:
    users:
      name: "basic-auth"
EOF

Verify the SecurityPolicy configuration:

kubectl get securitypolicy/basic-auth-example -o yaml

Testing

Ensure the GATEWAY_HOST environment variable from the Quickstart is set. If not, follow the Quickstart instructions to set the variable.

echo $GATEWAY_HOST

Send a request to the backend service without Authentication header:

curl -v -H "Host: www.example.com" "http://${GATEWAY_HOST}/"

You should see 401 Unauthorized in the response, indicating that the request is not allowed without authentication.

* Connected to 127.0.0.1 (127.0.0.1) port 443
...
* Server certificate:
*  subject: CN=www.example.com; O=example organization
*  issuer: O=example Inc.; CN=example.com
> GET / HTTP/2
> Host: www.example.com
> User-Agent: curl/8.6.0
> Accept: */*
...
< HTTP/2 401
< content-length: 58
< content-type: text/plain
< date: Wed, 06 Mar 2024 15:59:36 GMT
<

* Connection #0 to host 127.0.0.1 left intact
User authentication failed. Missing username and password.

Send a request to the backend service with Authentication header:

curl -kv -H "Host: www.example.com" -u 'foo:bar' "https://${GATEWAY_HOST}/" 

The request should be allowed and you should see the response from the backend service.

Clean-Up

Follow the steps from the Quickstart to uninstall Envoy Gateway and the example manifest.

Delete the SecurityPolicy and the secret

kubectl delete securitypolicy/basic-auth-example
kubectl delete secret/basic-auth
kubectl delete secret/example-cert

Next Steps

Checkout the Developer Guide to get involved in the project.

1.3.3 - CORS

This guide provides instructions for configuring Cross-Origin Resource Sharing (CORS) on Envoy Gateway. CORS defines a way for client web applications that are loaded in one domain to interact with resources in a different domain.

Envoy Gateway introduces a new CRD called SecurityPolicy that allows the user to configure CORS. This instantiated resource can be linked to a Gateway, HTTPRoute or GRPCRoute resource.

Prerequisites

Follow the steps from the Quickstart guide to install Envoy Gateway and the example manifest. Before proceeding, you should be able to query the example backend using HTTP.

Configuration

When configuring CORS either an origin with a precise hostname can be configured or an hostname containing a wildcard prefix, allowing all subdomains of the specified hostname. In addition to that the entire origin (with or without specifying a scheme) can be a wildcard to allow all origins.

The below example defines a SecurityPolicy that allows CORS for all HTTP requests originating from www.foo.com.

cat <<EOF | kubectl apply -f -
apiVersion: gateway.envoyproxy.io/v1alpha1
kind: SecurityPolicy
metadata:
  name: cors-example
spec:
  targetRef:
    group: gateway.networking.k8s.io
    kind: HTTPRoute
    name: backend
  cors:
    allowOrigins:
    - "http://*.foo.com"
    - "http://*.foo.com:80"
    allowMethods:
    - GET
    - POST
    allowHeaders:
    - "x-header-1"
    - "x-header-2"
    exposeHeaders:
    - "x-header-3"
    - "x-header-4"
EOF

Verify the SecurityPolicy configuration:

kubectl get securitypolicy/cors-example -o yaml

Testing

Ensure the GATEWAY_HOST environment variable from the Quickstart guide is set. If not, follow the Quickstart instructions to set the variable.

echo $GATEWAY_HOST

Verify that the CORS headers are present in the response of the OPTIONS request from http://www.foo.com:

curl -H "Origin: http://www.foo.com" \
  -H "Host: www.example.com" \
  -H "Access-Control-Request-Method: GET" \
  -X OPTIONS -v -s \
  http://$GATEWAY_HOST \
  1> /dev/null

You should see the below response, indicating that the request from http://www.foo.com is allowed:

< access-control-allow-origin: http://www.foo.com
< access-control-allow-methods: GET, POST
< access-control-allow-headers: x-header-1, x-header-2
< access-control-max-age: 86400
< access-control-expose-headers: x-header-3, x-header-4

If you try to send a request from http://www.bar.com, you should see the below response:

curl -H "Origin: http://www.bar.com" \
  -H "Host: www.example.com" \
  -H "Access-Control-Request-Method: GET" \
  -X OPTIONS -v -s \
  http://$GATEWAY_HOST \
  1> /dev/null

You won’t see any CORS headers in the response, indicating that the request from http://www.bar.com was not allowed.

If you try to send a request from http://www.foo.com:8080, you should also see similar response because the port number 8080 is not included in the allowed origins.

```shell
curl -H "Origin: http://www.foo.com:8080" \
  -H "Host: www.example.com" \
  -H "Access-Control-Request-Method: GET" \
  -X OPTIONS -v -s \
  http://$GATEWAY_HOST \
  1> /dev/null

Note:

  • CORS specification requires that the browsers to send a preflight request to the server to ask if it’s allowed to access the limited resource in another domains. The browsers are supposed to follow the response from the server to determine whether to send the actual request or not. The CORS filter only response to the preflight requests according to its configuration. It won’t deny any requests. The browsers are responsible for enforcing the CORS policy.
  • The targeted HTTPRoute or the HTTPRoutes that the targeted Gateway routes to must allow the OPTIONS method for the CORS filter to work. Otherwise, the OPTIONS request won’t match the routes and the CORS filter won’t be invoked.

Clean-Up

Follow the steps from the Quickstart guide to uninstall Envoy Gateway and the example manifest.

Delete the SecurityPolicy:

kubectl delete securitypolicy/cors-example

Next Steps

Checkout the Developer Guide to get involved in the project.

1.3.4 - External Authorization

This guide provides instructions for configuring external authentication.

External authorization calls an external HTTP or gRPC service to check whether an incoming HTTP request is authorized or not. If the request is deemed unauthorized, then the request will be denied with a 403 (Forbidden) response. If the request is authorized, then the request will be allowed to proceed to the backend service.

Envoy Gateway introduces a new CRD called SecurityPolicy that allows the user to configure external authorization. This instantiated resource can be linked to a Gateway and HTTPRoute resource.

Prerequisites

Follow the steps from the Quickstart guide to install Envoy Gateway and the example manifest. Before proceeding, you should be able to query the example backend using HTTP.

Verify the Gateway status:

kubectl get gateway/eg -o yaml

HTTP External Authorization Service

Installation

Install a demo HTTP service that will be used as the external authorization service:

kubectl apply -f https://raw.githubusercontent.com/envoyproxy/gateway/latest/examples/kubernetes/ext-auth-http-service.yaml

Create a new HTTPRoute resource to route traffic on the path /myapp to the backend service.

cat <<EOF | kubectl apply -f -
apiVersion: gateway.networking.k8s.io/v1
kind: HTTPRoute
metadata:
  name: myapp
spec:
  parentRefs:
  - name: eg
  hostnames:
  - "www.example.com"
  rules:
  - matches:
    - path:
        type: PathPrefix
        value: /myapp
    backendRefs:
    - name: backend
      port: 3000   
EOF

Verify the HTTPRoute status:

kubectl get httproute/myapp -o yaml

Configuration

Create a new SecurityPolicy resource to configure the external authorization. This SecurityPolicy targets the HTTPRoute “myApp” created in the previous step. It calls the HTTP external authorization service “http-ext-auth” on port 9002 for authorization. The headersToBackend field specifies the headers that will be sent to the backend service if the request is successfully authorized.

cat <<EOF | kubectl apply -f -
apiVersion: gateway.envoyproxy.io/v1alpha1
kind: SecurityPolicy
metadata:
  name: ext-auth-example
spec:
  targetRef:
    group: gateway.networking.k8s.io
    kind: HTTPRoute
    name: myapp
  extAuth:
    http:
      backendRef:
        name: http-ext-auth
        port: 9002
      headersToBackend: ["x-current-user"]
EOF

Verify the SecurityPolicy configuration:

kubectl get securitypolicy/ext-auth-example -o yaml

Testing

Ensure the GATEWAY_HOST environment variable from the Quickstart guide is set. If not, follow the Quickstart instructions to set the variable.

echo $GATEWAY_HOST

Send a request to the backend service without Authentication header:

curl -v -H "Host: www.example.com" "http://${GATEWAY_HOST}/myapp"

You should see 403 Forbidden in the response, indicating that the request is not allowed without authentication.

* Connected to 172.18.255.200 (172.18.255.200) port 80 (#0)
> GET /myapp HTTP/1.1
> Host: www.example.com
> User-Agent: curl/7.68.0
> Accept: */*
...
< HTTP/1.1 403 Forbidden
< date: Mon, 11 Mar 2024 03:41:15 GMT
< x-envoy-upstream-service-time: 0
< content-length: 0
< 
* Connection #0 to host 172.18.255.200 left intact

Send a request to the backend service with Authentication header:

curl -v -H "Host: www.example.com" -H "Authorization: Bearer token1" "http://${GATEWAY_HOST}/myapp"

The request should be allowed and you should see the response from the backend service. Because the x-current-user header from the auth response has been sent to the backend service, you should see the x-current-user header in the response.

"X-Current-User": [
   "user1"
  ],

GRPC External Authorization Service

Installation

Install a demo gRPC service that will be used as the external authorization service. The demo gRPC service is enabled with TLS and a BackendTLSConfig is created to configure the communication between the Envoy proxy and the gRPC service.

Note: TLS is optional for HTTP or gRPC external authorization services. However, enabling TLS is recommended for enhanced security in production environments.

kubectl apply -f https://raw.githubusercontent.com/envoyproxy/gateway/latest/examples/kubernetes/ext-auth-grpc-service.yaml

The HTTPRoute created in the previous section is still valid and can be used with the gRPC auth service, but if you have not created the HTTPRoute, you can create it now.

Create a new HTTPRoute resource to route traffic on the path /myapp to the backend service.

cat <<EOF | kubectl apply -f -
apiVersion: gateway.networking.k8s.io/v1
kind: HTTPRoute
metadata:
  name: myapp
spec:
  parentRefs:
  - name: eg
  hostnames:
  - "www.example.com"
  rules:
  - matches:
    - path:
        type: PathPrefix
        value: /myapp
    backendRefs:
    - name: backend
      port: 3000   
EOF

Verify the HTTPRoute status:

kubectl get httproute/myapp -o yaml

Configuration

Update the SecurityPolicy that was created in the previous section to use the gRPC external authorization service. It calls the gRPC external authorization service “grpc-ext-auth” on port 9002 for authorization.

cat <<EOF | kubectl apply -f -
apiVersion: gateway.envoyproxy.io/v1alpha1
kind: SecurityPolicy
metadata:
  name: ext-auth-example
spec:
  targetRef:
    group: gateway.networking.k8s.io
    kind: HTTPRoute
    name: myapp
  extAuth:
    grpc:
      backendRef:
        name: grpc-ext-auth
        port: 9002
EOF

Verify the SecurityPolicy configuration:

kubectl get securitypolicy/ext-auth-example -o yaml

Because the gRPC external authorization service is enabled with TLS, a BackendTLSConfig needs to be created to configure the communication between the Envoy proxy and the gRPC auth service.

cat <<EOF | kubectl apply -f -
apiVersion: gateway.networking.k8s.io/v1alpha2
kind: BackendTLSPolicy
metadata:
  name: grpc-ext-auth-btls
spec:
  targetRef:
    group: ''
    kind: Service
    name: grpc-ext-auth
    sectionName: "9002"
  tls:
    caCertRefs:
    - name: grpc-ext-auth-ca
      group: ''
      kind: ConfigMap
    hostname: grpc-ext-auth
EOF

Verify the BackendTLSPolicy configuration:

kubectl get backendtlspolicy/grpc-ext-auth-btls -o yaml

Testing

Ensure the GATEWAY_HOST environment variable from the Quickstart guide is set. If not, follow the Quickstart instructions to set the variable.

echo $GATEWAY_HOST

Send a request to the backend service without Authentication header:

curl -v -H "Host: www.example.com" "http://${GATEWAY_HOST}/myapp"

You should see 403 Forbidden in the response, indicating that the request is not allowed without authentication.

* Connected to 172.18.255.200 (172.18.255.200) port 80 (#0)
> GET /myapp HTTP/1.1
> Host: www.example.com
> User-Agent: curl/7.68.0
> Accept: */*
...
< HTTP/1.1 403 Forbidden
< date: Mon, 11 Mar 2024 03:41:15 GMT
< x-envoy-upstream-service-time: 0
< content-length: 0
< 
* Connection #0 to host 172.18.255.200 left intact

Send a request to the backend service with Authentication header:

curl -v -H "Host: www.example.com" -H "Authorization: Bearer token1" "http://${GATEWAY_HOST}/myapp"

Clean-Up

Follow the steps from the Quickstart guide to uninstall Envoy Gateway and the example manifest.

Delete the demo auth services, HTTPRoute, SecurityPolicy and BackendTLSPolicy:

kubectl delete -f https://raw.githubusercontent.com/envoyproxy/gateway/latest/examples/kubernetes/ext-auth-http-service.yaml
kubectl delete -f https://raw.githubusercontent.com/envoyproxy/gateway/latest/examples/kubernetes/ext-auth-grpc-service.yaml
kubectl delete httproute/myapp
kubectl delete securitypolicy/ext-auth-example
kubectl delete backendtlspolicy/grpc-ext-auth-btls

Next Steps

Checkout the Developer Guide to get involved in the project.

1.3.5 - JWT Authentication

This guide provides instructions for configuring JSON Web Token (JWT) authentication. JWT authentication checks if an incoming request has a valid JWT before routing the request to a backend service. Currently, Envoy Gateway only supports validating a JWT from an HTTP header, e.g. Authorization: Bearer <token>.

Envoy Gateway introduces a new CRD called SecurityPolicy that allows the user to configure JWT authentication. This instantiated resource can be linked to a Gateway, HTTPRoute or GRPCRoute resource.

Prerequisites

Follow the steps from the Quickstart guide to install Envoy Gateway and the example manifest. For GRPC - follow the steps from the GRPC Routing example. Before proceeding, you should be able to query the example backend using HTTP or GRPC.

Configuration

Allow requests with a valid JWT by creating an SecurityPolicy and attaching it to the example HTTPRoute or GRPCRoute.

HTTPRoute

kubectl apply -f https://raw.githubusercontent.com/envoyproxy/gateway/latest/examples/kubernetes/jwt/jwt.yaml

Two HTTPRoute has been created, one for /foo and another for /bar. A SecurityPolicy has been created and targeted HTTPRoute foo to authenticate requests for /foo. The HTTPRoute bar is not targeted by the SecurityPolicy and will allow
unauthenticated requests to /bar.

Verify the HTTPRoute configuration and status:

kubectl get httproute/foo -o yaml
kubectl get httproute/bar -o yaml

The SecurityPolicy is configured for JWT authentication and uses a single JSON Web Key Set (JWKS) provider for authenticating the JWT.

Verify the SecurityPolicy configuration:

kubectl get securitypolicy/jwt-example -o yaml

GRPCRoute

kubectl apply -f https://raw.githubusercontent.com/envoyproxy/gateway/latest/examples/kubernetes/jwt/grpc-jwt.yaml

A SecurityPolicy has been created and targeted GRPCRoute yages to authenticate all requests for yages service..

Verify the GRPCRoute configuration and status:

kubectl get grpcroute/yages -o yaml

The SecurityPolicy is configured for JWT authentication and uses a single JSON Web Key Set (JWKS) provider for authenticating the JWT.

Verify the SecurityPolicy configuration:

kubectl get securitypolicy/jwt-example -o yaml

Testing

Ensure the GATEWAY_HOST environment variable from the Quickstart guide is set. If not, follow the Quickstart instructions to set the variable.

echo $GATEWAY_HOST

HTTPRoute

Verify that requests to /foo are denied without a JWT:

curl -sS -o /dev/null -H "Host: www.example.com" -w "%{http_code}\n" http://$GATEWAY_HOST/foo

A 401 HTTP response code should be returned.

Get the JWT used for testing request authentication:

TOKEN=$(curl https://raw.githubusercontent.com/envoyproxy/gateway/main/examples/kubernetes/jwt/test.jwt -s) && echo "$TOKEN" | cut -d '.' -f2 - | base64 --decode

Note: The above command decodes and returns the token’s payload. You can replace f2 with f1 to view the token’s header.

Verify that a request to /foo with a valid JWT is allowed:

curl -sS -o /dev/null -H "Host: www.example.com" -H "Authorization: Bearer $TOKEN" -w "%{http_code}\n" http://$GATEWAY_HOST/foo

A 200 HTTP response code should be returned.

Verify that requests to /bar are allowed without a JWT:

curl -sS -o /dev/null -H "Host: www.example.com" -w "%{http_code}\n" http://$GATEWAY_HOST/bar

GRPCRoute

Verify that requests to yagesservice are denied without a JWT:

grpcurl -plaintext -authority=grpc-example.com ${GATEWAY_HOST}:80 yages.Echo/Ping

You should see the below response

Error invoking method "yages.Echo/Ping": rpc error: code = Unauthenticated desc = failed to query for service descriptor "yages.Echo": Jwt is missing

Get the JWT used for testing request authentication:

TOKEN=$(curl https://raw.githubusercontent.com/envoyproxy/gateway/main/examples/kubernetes/jwt/test.jwt -s) && echo "$TOKEN" | cut -d '.' -f2 - | base64 --decode

Note: The above command decodes and returns the token’s payload. You can replace f2 with f1 to view the token’s header.

Verify that a request to yages service with a valid JWT is allowed:

grpcurl -plaintext -H "authorization: Bearer $TOKEN" -authority=grpc-example.com ${GATEWAY_HOST}:80 yages.Echo/Ping

You should see the below response

{
  "text": "pong"
}

Clean-Up

Follow the steps from the Quickstart guide to uninstall Envoy Gateway and the example manifest.

Delete the SecurityPolicy:

kubectl delete securitypolicy/jwt-example

Next Steps

Checkout the Developer Guide to get involved in the project.

1.3.6 - Mutual TLS: External Clients to the Gateway

This task demonstrates how mutual TLS can be achieved between external clients and the Gateway. This task uses a self-signed CA, so it should be used for testing and demonstration purposes only.

Prerequisites

  • OpenSSL to generate TLS assets.

Installation

Follow the steps from the Quickstart to install Envoy Gateway and the example manifest. Before proceeding, you should be able to query the example backend using HTTP.

TLS Certificates

Generate the certificates and keys used by the Gateway to terminate client TLS connections.

Create a root certificate and private key to sign certificates:

openssl req -x509 -sha256 -nodes -days 365 -newkey rsa:2048 -subj '/O=example Inc./CN=example.com' -keyout example.com.key -out example.com.crt

Create a certificate and a private key for www.example.com:

openssl req -out www.example.com.csr -newkey rsa:2048 -nodes -keyout www.example.com.key -subj "/CN=www.example.com/O=example organization"
openssl x509 -req -days 365 -CA example.com.crt -CAkey example.com.key -set_serial 0 -in www.example.com.csr -out www.example.com.crt

Store the cert/key in a Secret:

kubectl create secret tls example-cert --key=www.example.com.key --cert=www.example.com.crt --certificate-authority=example.com.crt

Store the CA Cert in another Secret:

kubectl create secret generic example-ca-cert --from-file=ca.crt=example.com.crt

Create a certificate and a private key for the client client.example.com:

openssl req -out client.example.com.csr -newkey rsa:2048 -nodes -keyout client.example.com.key -subj "/CN=client.example.com/O=example organization"
openssl x509 -req -days 365 -CA example.com.crt -CAkey example.com.key -set_serial 0 -in client.example.com.csr -out client.example.com.crt

Update the Gateway from the Quickstart to include an HTTPS listener that listens on port 443 and references the example-cert Secret:

kubectl patch gateway eg --type=json --patch '
  - op: add
    path: /spec/listeners/-
    value:
      name: https
      protocol: HTTPS
      port: 443
      tls:
        mode: Terminate
        certificateRefs:
          - kind: Secret
            group: ""
            name: example-cert
  '

Verify the Gateway status:

kubectl get gateway/eg -o yaml

Create a ClientTrafficPolicy to enforce client validation using the CA Certificate as a trusted anchor.

cat <<EOF | kubectl apply -f -
apiVersion: gateway.envoyproxy.io/v1alpha1
kind: ClientTrafficPolicy
metadata:
  name: enable-mtls
  namespace: default
spec:
  targetRef:
    group: gateway.networking.k8s.io
    kind: Gateway
    name: eg
    namespace: default
  tls:
    clientValidation:
      caCertificateRefs:
      - kind: "Secret"
        group: ""
        name: "example-ca-cert"
EOF

Testing

Clusters without External LoadBalancer Support

Get the name of the Envoy service created the by the example Gateway:

export ENVOY_SERVICE=$(kubectl get svc -n envoy-gateway-system --selector=gateway.envoyproxy.io/owning-gateway-namespace=default,gateway.envoyproxy.io/owning-gateway-name=eg -o jsonpath='{.items[0].metadata.name}')

Port forward to the Envoy service:

kubectl -n envoy-gateway-system port-forward service/${ENVOY_SERVICE} 8443:443 &

Query the example app through Envoy proxy:

curl -v -HHost:www.example.com --resolve "www.example.com:8443:127.0.0.1" \
--cert client.example.com.crt --key client.example.com.key \
--cacert example.com.crt https://www.example.com:8443/get

Clusters with External LoadBalancer Support

Get the External IP of the Gateway:

export GATEWAY_HOST=$(kubectl get gateway/eg -o jsonpath='{.status.addresses[0].value}')

Query the example app through the Gateway:

curl -v -HHost:www.example.com --resolve "www.example.com:443:${GATEWAY_HOST}" \
--cert client.example.com.crt --key client.example.com.key \
--cacert example.com.crt https://www.example.com/get

Dont specify the client key and certificate in the above command, and ensure that the connection fails

curl -v -HHost:www.example.com --resolve "www.example.com:443:${GATEWAY_HOST}" \
--cacert example.com.crt https://www.example.com/get

1.3.7 - OIDC Authentication

This task provides instructions for configuring OpenID Connect (OIDC) authentication. OpenID Connect (OIDC) is an authentication standard built on top of OAuth 2.0. It enables EG to rely on authentication that is performed by an OpenID Connect Provider (OP) to verify the identity of a user.

Envoy Gateway introduces a new CRD called SecurityPolicy that allows the user to configure OIDC authentication. This instantiated resource can be linked to a Gateway and HTTPRoute resource.

Prerequisites

Follow the steps from the Quickstart to install Envoy Gateway and the example manifest. Before proceeding, you should be able to query the example backend using HTTP.

EG OIDC authentication requires the redirect URL to be HTTPS. Follow the Secure Gateways guide to generate the TLS certificates and update the Gateway configuration to add an HTTPS listener.

Verify the Gateway status:

kubectl get gateway/eg -o yaml

Let’s create an HTTPRoute that represents an application protected by OIDC.

cat <<EOF | kubectl apply -f -
apiVersion: gateway.networking.k8s.io/v1
kind: HTTPRoute
metadata:
  name: myapp
spec:
  parentRefs:
  - name: eg
  hostnames: ["www.example.com"]
  rules:
  - matches:
    - path:
        type: PathPrefix
        value: /myapp
    backendRefs:
    - name: backend
      port: 3000
EOF

Save and apply the following resource to your cluster:

---
apiVersion: gateway.networking.k8s.io/v1
kind: HTTPRoute
metadata:
  name: myapp
spec:
  parentRefs:
  - name: eg
  hostnames: ["www.example.com"]
  rules:
  - matches:
    - path:
        type: PathPrefix
        value: /myapp
    backendRefs:
    - name: backend
      port: 3000

Verify the HTTPRoute status:

kubectl get httproute/myapp -o yaml

OIDC Authentication for a HTTPRoute

OIDC can be configured at the Gateway level to authenticate all the HTTPRoutes that are associated with the Gateway with the same OIDC configuration, or at the HTTPRoute level to authenticate each HTTPRoute with different OIDC configurations.

This section demonstrates how to configure OIDC authentication for a specific HTTPRoute.

Register an OIDC application

This task uses Google as the OIDC provider to demonstrate the configuration of OIDC. However, EG works with any OIDC providers, including Auth0, Azure AD, Keycloak, Okta, OneLogin, Salesforce, UAA, etc.

Follow the steps in the Google OIDC documentation to register an OIDC application. Please make sure the redirect URL is set to the one you configured in the SecurityPolicy that you will create in the step below. In this example, the redirect URL is http://www.example.com:8443/myapp/oauth2/callback.

After registering the application, you should have the following information:

  • Client ID: The client ID of the OIDC application.
  • Client Secret: The client secret of the OIDC application.

Create a kubernetes secret

Next, create a kubernetes secret with the Client Secret created in the previous step. The secret is an Opaque secret, and the Client Secret must be stored in the key “client-secret”.

Note: please replace the ${CLIENT_SECRET} with the actual Client Secret that you got from the previous step.

kubectl create secret generic my-app-client-secret --from-literal=client-secret=${CLIENT_SECRET}

Create a SecurityPolicy

Please notice that the redirectURL and logoutPath must match the target HTTPRoute. In this example, the target HTTPRoute is configured to match the host www.example.com and the path /myapp, so the redirectURL must be prefixed with https://www.example.com:8443/myapp, and logoutPath must be prefixed with/myapp, otherwise the OIDC authentication will fail because the redirect and logout requests will not match the target HTTPRoute and therefore can’t be processed by the OAuth2 filter on that HTTPRoute.

Note: please replace the ${CLIENT_ID} in the below yaml snippet with the actual Client ID that you got from the OIDC provider.

cat <<EOF | kubectl apply -f -
apiVersion: gateway.envoyproxy.io/v1alpha1
kind: SecurityPolicy
metadata:
  name: oidc-example
spec:
  targetRef:
    group: gateway.networking.k8s.io
    kind: HTTPRoute
    name: myapp
  oidc:
    provider:
      issuer: "https://accounts.google.com"
    clientID: "${CLIENT_ID}"
    clientSecret:
      name: "my-app-client-secret"
    redirectURL: "https://www.example.com:8443/myapp/oauth2/callback"
    logoutPath: "/myapp/logout"
EOF

Save and apply the following resource to your cluster:

---
apiVersion: gateway.envoyproxy.io/v1alpha1
kind: SecurityPolicy
metadata:
  name: oidc-example
spec:
  targetRef:
    group: gateway.networking.k8s.io
    kind: HTTPRoute
    name: myapp
  oidc:
    provider:
      issuer: "https://accounts.google.com"
    clientID: "${CLIENT_ID}"
    clientSecret:
      name: "my-app-client-secret"
    redirectURL: "https://www.example.com:8443/myapp/oauth2/callback"
    logoutPath: "/myapp/logout"

Verify the SecurityPolicy configuration:

kubectl get securitypolicy/oidc-example -o yaml

Testing

Port forward gateway port to localhost:

export ENVOY_SERVICE=$(kubectl get svc -n envoy-gateway-system --selector=gateway.envoyproxy.io/owning-gateway-namespace=default,gateway.envoyproxy.io/owning-gateway-name=eg -o jsonpath='{.items[0].metadata.name}')

kubectl -n envoy-gateway-system port-forward service/${ENVOY_SERVICE} 8443:443

Put www.example.com in the /etc/hosts file in your test machine, so we can use this host name to access the gateway from a browser:

...
127.0.0.1 www.example.com

Open a browser and navigate to the https://www.example.com:8443/myapp address. You should be redirected to the Google login page. After you successfully login, you should see the response from the backend service.

Clean the cookies in the browser and try to access https://www.example.com:8443/foo address. You should be able to see this page since the path /foo is not protected by the OIDC policy.

OIDC Authentication for a Gateway

OIDC can be configured at the Gateway level to authenticate all the HTTPRoutes that are associated with the Gateway with the same OIDC configuration, or at the HTTPRoute level to authenticate each HTTPRoute with different OIDC configurations.

This section demonstrates how to configure OIDC authentication for a Gateway.

Register an OIDC application

If you haven’t registered an OIDC application, follow the steps in the previous section to register an OIDC application.

Create a kubernetes secret

If you haven’t created a kubernetes secret, follow the steps in the previous section to create a kubernetes secret.

Create a SecurityPolicy

Create or update the SecurityPolicy to target the Gateway instead of the HTTPRoute. Please notice that the redirectURL and logoutPath must match one of the HTTPRoutes associated with the Gateway. In this example, the target Gateway has two HTTPRoutes associated with it, one with the host www.example.com and the path /myapp, and the other with the host www.example.com and the path /. Either one of the HTTPRoutes can be used to match the redirectURL and logoutPath.

cat <<EOF | kubectl apply -f -
apiVersion: gateway.envoyproxy.io/v1alpha1
kind: SecurityPolicy
metadata:
  name: oidc-example
spec:
  targetRef:
    group: gateway.networking.k8s.io
    kind: Gateway
    name: eg
  oidc:
    provider:
      issuer: "https://accounts.google.com"
    clientID: "${CLIENT_ID}"
    clientSecret:
      name: "my-app-client-secret"
    redirectURL: "https://www.example.com:8443/myapp/oauth2/callback"
    logoutPath: "/myapp/logout"
EOF

Save and apply the following resource to your cluster:

---
apiVersion: gateway.envoyproxy.io/v1alpha1
kind: SecurityPolicy
metadata:
  name: oidc-example
spec:
  targetRef:
    group: gateway.networking.k8s.io
    kind: Gateway
    name: eg
  oidc:
    provider:
      issuer: "https://accounts.google.com"
    clientID: "${CLIENT_ID}"
    clientSecret:
      name: "my-app-client-secret"
    redirectURL: "https://www.example.com:8443/myapp/oauth2/callback"
    logoutPath: "/myapp/logout"

Verify the SecurityPolicy configuration:

kubectl get securitypolicy/oidc-example -o yaml

Testing

If you haven’t done so, follow the steps in the previous section to port forward gateway port to localhost and put www.example.com in the /etc/hosts file in your test machine.

Open a browser and navigate to the https://www.example.com:8443/foo address. You should be redirected to the Google login page. After you successfully login, you should see the response from the backend service.

You can also try to access https://www.example.com:8443/myapp address. You should be able to see this page since the path /myapp is protected by the same OIDC policy.

Clean-Up

Follow the steps from the Quickstart to uninstall Envoy Gateway and the example manifest.

Delete the SecurityPolicy, the secret and the HTTPRoute:

kubectl delete securitypolicy/oidc-example
kubectl delete secret/my-app-client-secret
kubectl delete httproute/myapp

Next Steps

Checkout the Developer Guide to get involved in the project.

1.3.8 - Secure Gateways

This task will help you get started using secure Gateways. This task uses a self-signed CA, so it should be used for testing and demonstration purposes only.

Prerequisites

  • OpenSSL to generate TLS assets.

Installation

Follow the steps from the Quickstart to install Envoy Gateway and the example manifest. Before proceeding, you should be able to query the example backend using HTTP.

TLS Certificates

Generate the certificates and keys used by the Gateway to terminate client TLS connections.

Create a root certificate and private key to sign certificates:

openssl req -x509 -sha256 -nodes -days 365 -newkey rsa:2048 -subj '/O=example Inc./CN=example.com' -keyout example.com.key -out example.com.crt

Create a certificate and a private key for www.example.com:

openssl req -out www.example.com.csr -newkey rsa:2048 -nodes -keyout www.example.com.key -subj "/CN=www.example.com/O=example organization"
openssl x509 -req -days 365 -CA example.com.crt -CAkey example.com.key -set_serial 0 -in www.example.com.csr -out www.example.com.crt

Store the cert/key in a Secret:

kubectl create secret tls example-cert --key=www.example.com.key --cert=www.example.com.crt

Update the Gateway from the Quickstart to include an HTTPS listener that listens on port 443 and references the example-cert Secret:

kubectl patch gateway eg --type=json --patch '
  - op: add
    path: /spec/listeners/-
    value:
      name: https
      protocol: HTTPS
      port: 443
      tls:
        mode: Terminate
        certificateRefs:
        - kind: Secret
          group: ""
          name: example-cert
  '

Verify the Gateway status:

kubectl get gateway/eg -o yaml

Testing

Clusters without External LoadBalancer Support

Get the name of the Envoy service created the by the example Gateway:

export ENVOY_SERVICE=$(kubectl get svc -n envoy-gateway-system --selector=gateway.envoyproxy.io/owning-gateway-namespace=default,gateway.envoyproxy.io/owning-gateway-name=eg -o jsonpath='{.items[0].metadata.name}')

Port forward to the Envoy service:

kubectl -n envoy-gateway-system port-forward service/${ENVOY_SERVICE} 8443:443 &

Query the example app through Envoy proxy:

curl -v -HHost:www.example.com --resolve "www.example.com:8443:127.0.0.1" \
--cacert example.com.crt https://www.example.com:8443/get

Clusters with External LoadBalancer Support

Get the External IP of the Gateway:

export GATEWAY_HOST=$(kubectl get gateway/eg -o jsonpath='{.status.addresses[0].value}')

Query the example app through the Gateway:

curl -v -HHost:www.example.com --resolve "www.example.com:443:${GATEWAY_HOST}" \
--cacert example.com.crt https://www.example.com/get

Multiple HTTPS Listeners

Create a TLS cert/key for the additional HTTPS listener:

openssl req -out foo.example.com.csr -newkey rsa:2048 -nodes -keyout foo.example.com.key -subj "/CN=foo.example.com/O=example organization"
openssl x509 -req -days 365 -CA example.com.crt -CAkey example.com.key -set_serial 0 -in foo.example.com.csr -out foo.example.com.crt

Store the cert/key in a Secret:

kubectl create secret tls foo-cert --key=foo.example.com.key --cert=foo.example.com.crt

Create another HTTPS listener on the example Gateway:

kubectl patch gateway eg --type=json --patch '
  - op: add
    path: /spec/listeners/-
    value:
      name: https-foo
      protocol: HTTPS
      port: 443
      hostname: foo.example.com
      tls:
        mode: Terminate
        certificateRefs:
        - kind: Secret
          group: ""
          name: foo-cert
  '

Update the HTTPRoute to route traffic for hostname foo.example.com to the example backend service:

kubectl patch httproute backend --type=json --patch '
  - op: add
    path: /spec/hostnames/-
    value: foo.example.com
  '

Verify the Gateway status:

kubectl get gateway/eg -o yaml

Follow the steps in the Testing section to test connectivity to the backend app through both Gateway listeners. Replace www.example.com with foo.example.com to test the new HTTPS listener.

Cross Namespace Certificate References

A Gateway can be configured to reference a certificate in a different namespace. This is allowed by a ReferenceGrant created in the target namespace. Without the ReferenceGrant, a cross-namespace reference is invalid.

Before proceeding, ensure you can query the HTTPS backend service from the Testing section.

To demonstrate cross namespace certificate references, create a ReferenceGrant that allows Gateways from the “default” namespace to reference Secrets in the “envoy-gateway-system” namespace:

cat <<EOF | kubectl apply -f -
apiVersion: gateway.networking.k8s.io/v1beta1
kind: ReferenceGrant
metadata:
  name: example
  namespace: envoy-gateway-system
spec:
  from:
  - group: gateway.networking.k8s.io
    kind: Gateway
    namespace: default
  to:
  - group: ""
    kind: Secret
EOF

Delete the previously created Secret:

kubectl delete secret/example-cert

The Gateway HTTPS listener should now surface the Ready: False status condition and the example HTTPS backend should no longer be reachable through the Gateway.

kubectl get gateway/eg -o yaml

Recreate the example Secret in the envoy-gateway-system namespace:

kubectl create secret tls example-cert -n envoy-gateway-system --key=www.example.com.key --cert=www.example.com.crt

Update the Gateway HTTPS listener with namespace: envoy-gateway-system, for example:

cat <<EOF | kubectl apply -f -
apiVersion: gateway.networking.k8s.io/v1
kind: Gateway
metadata:
  name: eg
spec:
  gatewayClassName: eg
  listeners:
    - name: http
      protocol: HTTP
      port: 80
    - name: https
      protocol: HTTPS
      port: 443
      tls:
        mode: Terminate
        certificateRefs:
          - kind: Secret
            group: ""
            name: example-cert
            namespace: envoy-gateway-system
EOF

The Gateway HTTPS listener status should now surface the Ready: True condition and you should once again be able to query the HTTPS backend through the Gateway.

Lastly, test connectivity using the above Testing section.

Clean-Up

Follow the steps from the Quickstart to uninstall Envoy Gateway and the example manifest.

Delete the Secrets:

kubectl delete secret/example-cert
kubectl delete secret/foo-cert

RSA + ECDSA Dual stack certificates

This section gives a walkthrough to generate RSA and ECDSA derived certificates and keys for the Server, which can then be configured in the Gateway listener, to terminate TLS traffic.

Prerequisites

Follow the steps from the Quickstart to install Envoy Gateway and the example manifest. Before proceeding, you should be able to query the example backend using HTTP.

Follow the steps in the TLS Certificates section to generate self-signed RSA derived Server certificate and private key, and configure those in the Gateway listener configuration to terminate HTTPS traffic.

Pre-checks

While testing in Cluster without External LoadBalancer Support, we can query the example app through Envoy proxy while enforcing an RSA cipher, as shown below:

curl -v -HHost:www.example.com --resolve "www.example.com:8443:127.0.0.1" \
--cacert example.com.crt https://www.example.com:8443/get  -Isv --ciphers ECDHE-RSA-CHACHA20-POLY1305 --tlsv1.2 --tls-max 1.2

Since the Secret configured at this point is an RSA based Secret, if we enforce the usage of an ECDSA cipher, the call should fail as follows

$ curl -v -HHost:www.example.com --resolve "www.example.com:8443:127.0.0.1" \
--cacert example.com.crt https://www.example.com:8443/get  -Isv --ciphers ECDHE-ECDSA-CHACHA20-POLY1305 --tlsv1.2 --tls-max 1.2

* Added www.example.com:8443:127.0.0.1 to DNS cache
* Hostname www.example.com was found in DNS cache
*   Trying 127.0.0.1:8443...
* Connected to www.example.com (127.0.0.1) port 8443 (#0)
* ALPN: offers h2
* ALPN: offers http/1.1
* Cipher selection: ECDHE-ECDSA-CHACHA20-POLY1305
*  CAfile: example.com.crt
*  CApath: none
* (304) (OUT), TLS handshake, Client hello (1):
* error:1404B410:SSL routines:ST_CONNECT:sslv3 alert handshake failure
* Closing connection 0

Moving forward in the doc, we will be configuring the existing Gateway listener to accept both kinds of ciphers.

TLS Certificates

Reuse the CA certificate and key pair generated in the Secure Gateways task and use this CA to sign both RSA and ECDSA Server certificates. Note the CA certificate and key names are example.com.crt and example.com.key respectively.

Create an ECDSA certificate and a private key for www.example.com:

openssl ecparam -noout -genkey -name prime256v1 -out www.example.com.ecdsa.key
openssl req -new -SHA384 -key www.example.com.ecdsa.key -nodes -out www.example.com.ecdsa.csr -subj "/CN=www.example.com/O=example organization"
openssl x509 -req -SHA384  -days 365 -in www.example.com.ecdsa.csr -CA example.com.crt -CAkey example.com.key -CAcreateserial -out www.example.com.ecdsa.crt

Store the cert/key in a Secret:

kubectl create secret tls example-cert-ecdsa --key=www.example.com.ecdsa.key --cert=www.example.com.ecdsa.crt

Patch the Gateway with this additional ECDSA Secret:

kubectl patch gateway eg --type=json --patch '
  - op: add
    path: /spec/listeners/1/tls/certificateRefs/-
    value:
      name: example-cert-ecdsa
  '

Verify the Gateway status:

kubectl get gateway/eg -o yaml

Testing

Again, while testing in Cluster without External LoadBalancer Support, we can query the example app through Envoy proxy while enforcing an RSA cipher, which should work as it did before:

curl -v -HHost:www.example.com --resolve "www.example.com:8443:127.0.0.1" \
--cacert example.com.crt https://www.example.com:8443/get  -Isv --ciphers ECDHE-RSA-CHACHA20-POLY1305 --tlsv1.2 --tls-max 1.2
...
* TLSv1.2 (IN), TLS change cipher, Change cipher spec (1):
* TLSv1.2 (IN), TLS handshake, Finished (20):
* SSL connection using TLSv1.2 / ECDHE-RSA-CHACHA20-POLY1305
...

Additionally, querying the example app while enforcing an ECDSA cipher should also work now:

curl -v -HHost:www.example.com --resolve "www.example.com:8443:127.0.0.1" \
--cacert example.com.crt https://www.example.com:8443/get  -Isv --ciphers ECDHE-ECDSA-CHACHA20-POLY1305 --tlsv1.2 --tls-max 1.2
...
* TLSv1.2 (IN), TLS change cipher, Change cipher spec (1):
* TLSv1.2 (IN), TLS handshake, Finished (20):
* SSL connection using TLSv1.2 / ECDHE-ECDSA-CHACHA20-POLY1305
...

SNI based Certificate selection

This sections gives a walkthrough to generate multiple certificates corresponding to different FQDNs. The same Gateway listener can then be configured to terminate TLS traffic for multiple FQDNs based on the SNI matching.

Prerequisites

Follow the steps from the Quickstart to install Envoy Gateway and the example manifest. Before proceeding, you should be able to query the example backend using HTTP.

Follow the steps in the TLS Certificates section to generate self-signed RSA derived Server certificate and private key, and configure those in the Gateway listener configuration to terminate HTTPS traffic.

Additional Configurations

Using the TLS Certificates section, we first generate additional Secret for another Host www.sample.com.

openssl req -x509 -sha256 -nodes -days 365 -newkey rsa:2048 -subj '/O=sample Inc./CN=sample.com' -keyout sample.com.key -out sample.com.crt

openssl req -out www.sample.com.csr -newkey rsa:2048 -nodes -keyout www.sample.com.key -subj "/CN=www.sample.com/O=sample organization"
openssl x509 -req -days 365 -CA sample.com.crt -CAkey sample.com.key -set_serial 0 -in www.sample.com.csr -out www.sample.com.crt

kubectl create secret tls sample-cert --key=www.sample.com.key --cert=www.sample.com.crt

Note that all occurrences of example.com were just replaced with sample.com

Next we update the Gateway configuration to accommodate the new Certificate which will be used to Terminate TLS traffic:

kubectl patch gateway eg --type=json --patch '
  - op: add
    path: /spec/listeners/1/tls/certificateRefs/-
    value:
      name: sample-cert
  '

Finally, we update the HTTPRoute to route traffic for hostname www.sample.com to the example backend service:

kubectl patch httproute backend --type=json --patch '
  - op: add
    path: /spec/hostnames/-
    value: www.sample.com
  '

Testing

Clusters without External LoadBalancer Support

Get the name of the Envoy service created the by the example Gateway:

export ENVOY_SERVICE=$(kubectl get svc -n envoy-gateway-system --selector=gateway.envoyproxy.io/owning-gateway-namespace=default,gateway.envoyproxy.io/owning-gateway-name=eg -o jsonpath='{.items[0].metadata.name}')

Port forward to the Envoy service:

kubectl -n envoy-gateway-system port-forward service/${ENVOY_SERVICE} 8443:443 &

Query the example app through Envoy proxy:

curl -v -HHost:www.example.com --resolve "www.example.com:8443:127.0.0.1" \
--cacert example.com.crt https://www.example.com:8443/get -I

Similarly, query the sample app through the same Envoy proxy:

curl -v -HHost:www.sample.com --resolve "www.sample.com:8443:127.0.0.1" \
--cacert sample.com.crt https://www.sample.com:8443/get -I

Since the multiple certificates are configured on the same Gateway listener, Envoy was able to provide the client with appropriate certificate based on the SNI in the client request.

Clusters with External LoadBalancer Support

Refer to the steps mentioned earlier under Testing in clusters with External LoadBalancer Support

Next Steps

Checkout the Developer Guide to get involved in the project.

1.3.9 - Threat Model

Envoy Gateway Threat Model and End User Recommendations

About

This work was performed by ControlPlane and commissioned by the Linux Foundation. ControlPlane is a global cloud native and open source cybersecurity consultancy, trusted as the partner of choice in securing: multinational banks; major public clouds; international financial institutions; critical national infrastructure programs; multinational oil and gas companies, healthcare and insurance providers; and global media firms.

Threat Modelling Team

James Callaghan, Torin van den Bulk, Eduardo Olarte

Reviewers

Arko Dasgupta, Matt Turner, Zack Butcher, Marco De Benedictis

Introduction

As we embrace the proliferation of microservice-based architectures in the cloud-native landscape, simplicity in setup and configuration becomes paramount as DevOps teams face the challenge of choosing between numerous similar technologies. One such choice which every team deploying to Kubernetes faces is what to use as an ingress controller. With a plethora of options available, and the existence of vendor-specific annotations leading to small inconsistencies between implementations, the Gateway API project was introduced by the SIG-NETWORK community, with the goal of eventually replacing the Ingress resource.

Envoy Gateway is configured by Gateway API resources, and serves as an intuitive and feature-rich wrapper over the widely acclaimed Envoy Proxy. With a convenient setup based on Kubernetes (K8s) manifests, Envoy Gateway streamlines the management of Envoy Proxy instances in an edge-proxy setting, reducing the operational overhead of managing low-level Envoy configurations. Envoy Gateway benefits cloud-native DevOps teams through its role-oriented configuration, providing granular control based on Role-Based Access Control (RBAC) principles. These features form the basis of our exploration into Envoy Gateway and the rich feature set it brings to the table.

In this threat model, we aim to provide an analysis of Envoy Gateway’s design components and their capabilities (at version 1.0) through a threat-driven approach. It should be noted that this does not constitute a security audit of the Envoy Gateway project, but instead focuses on different possible deployment topologies for Envoy Gateway with the goal of deriving recommendations and best practice guidance for end users.

The Envoy Gateway project recommends a multi-tenancy model whereby each tenant deploys their own Envoy Gateway controller in a namespace which they own. We will also explore the implications and risks associated with multiple tenants using a shared controller.

Scope

The primary focus of this threat model is to identify and assess security risks associated with deploying and operating Envoy Gateway within a multi-tenant Kubernetes (K8s) cluster. This model aims to provide a comprehensive understanding of the system, its transmission points, and potential vulnerabilities to enumerated threats.

In Scope

Envoy Gateway: As the primary focus of this threat model, all aspects of Envoy Gateway, including its configuration, deployment, and operation will be analysed. This includes how the gateway manages TLS certificates, authentication, service-to-service traffic routing, and more.

Kubernetes Cluster: Configuration and operation of the underlying Kubernetes cluster, including how it manages network policies, access control, and resource isolation for different namespaces/tenants in relation to Envoy will be considered.

Tenant Workloads: Tenant workloads (and the pods they run on) will be considered, focusing on how they interact with the Envoy Gateway and potential vulnerabilities that could be exploited.

Out of Scope

This threat model will not consider security risks associated with the underlying infrastructure (e.g., EC2 compute instances and S3 buckets) or non-Envoy related components within the Kubernetes Cluster. It will focus solely on the Envoy Gateway and its interaction with the Kubernetes cluster and tenant workloads.

Implementation of Envoy Gateway as an egress traffic controller is out of scope for this threat model and will not be considered in the report’s findings.

Introducing Envoy Gateway

Envoy Proxy Threat Model

Configuring Envoy as an Edge Proxy

Envoy Gateway Deployment Mode

Kubernetes Gateway API Security Model

Architecture Overview

Summary

To provide an in-depth look into both the system design and end-user deployment of Envoy Gateway, we will be focusing on the Deployment Architecture Diagram below.

The Deployment Architecture Diagram provides a high-level model of an end-user deployment of Envoy Gateway. For simplicity, we will look at different deployment topologies on a single multi-tenant Kubernetes cluster. Envoy Gateway operates as an edge proxy within this environment, handling the traffic flow between external interfaces and services within the cluster. The example will use two Envoy Gateway controllers - one dedicated controller for a single tenant, and one shared controller for two other tenants. Each Envoy Gateway controller will accept a single GatewayClass resource.

Deployment Architecture Diagram

As Envoy Gateway implements the Kubernetes GatewayAPI, this threat model will focus on the key objects in the Gateway API resource model:

  1. GatewayClass: defines a set of gateways with a commonconfiguration and behaviour. It is a cluster scoped resource.

  2. Gateway: requests a point where traffic can be translated to Services within the cluster.

  3. Routes: describe how traffic coming via the Gateway maps to theServices.

At the time of writing, Envoy Gateway only supports a Kubernetes provider. As such, we will consider a reference architecture where multiple teams are working on the same Kubernetes cluster within different namespaces (Tenant A, B, & C). We will assume that some teams have similar security and performance needs, and a decision has been made to use a shared Gateway. However, we will also consider the case that some teams require dedicated Gateways, perhaps for compliance reasons or requirements driven by an internal threat model.

We will consider the following organisational roles, as per the Gateway API security model:

  1. Infrastructure provider: The infrastructure provider (infra) is responsible for the overall environment that the cluster(s) are operating in. Examples include: the cloud provider (AWS, Azure, GCP, …) or the PaaS provider in a company.

  2. Cluster operator: The cluster operator (ops) is responsible for administration of entire clusters. They manage policies, network access, application permissions.

  3. Application developer: The application developer (dev) is responsible for defining their application configuration (e.g. timeouts, request matching/filter) and Service composition (e.g. path routing to backends).

  4. Application admin: The application admin has administrative access to some namespaces within a cluster, but not the cluster as a whole.

Our threat model will be based on the high-level setup shown below, where Envoy is used in an edge-proxy scenario:

Architecture

The following use cases will be considered, in line with the Envoy Gateway Tasks:

  1. Routing and controlling traffic, including: a. HTTP
    b. TCP
    c. UDP
    d. gRPC
    e.TLS passthrough
  2. TLS termination
  3. Request Authentication
  4. Rate Limiting

Key Assumptions

This section outlines the foundational premises that shape our analysis and recommendations for the deployment and management of Envoy Gateway within an organisation. The key assumptions are as follows:

1. Kubernetes Provider: For the purposes of this analysis, we assume that a K8s provider will be used to host the cluster.

2. Multi-tenant cluster: In order to produce a broad set of recommendations, it is assumed that within the single cluster, there is:

  • A dedicated cluster operation (ops) team responsible for maintaining the core cluster infrastructure.

  • Multiple application teams who wish to define their own Gateway resources, which will route traffic to their respective applications.

3. Soft multi-tenancy model: It is assumed that co-tenants will have some level of trust between themselves, and will not act in an overtly hostile manner to each other.

4. Ingress Control: It’s assumed that Envoy Gateway is the only ingress controller in the K8s cluster as multiple controllers can lead to complex routing challenges and introduce out-of-scope security vulnerabilities.

5. Container Security: This threat model focuses on evaluating the security of the Envoy Gateway and Envoy Proxy images. All other container images running in tenant clusters, not associated with the edge proxy deployment, are assumed to be secure and obtained from trusted registries such as Docker Hub or Google Container Registry (GCR).

6. Cloud Provider Security: It is assumed that the K8s cluster is running on secure cloud infrastructure provided by a trusted Cloud Service Provider (CSP) such as AWS, GCP, or Azure Cloud.

Data

Data Dictionary

Ultimately, the data of interest in a threat model is the business data processed by the system in question. However, in the case of this threat model, we are looking at a generic deployment architecture involving Envoy Gateway in order to draw out a set of generalised threats which can be considered by teams looking to adopt an implementation of Gateway API. As such, we do not know the business impacts of a compromise of confidentiality, integrity or availability that would typically be captured in a data impact assessment. Instead, will we base our threat assessment on high-level groupings of data structures used in the configuration and operation of the general use cases considered (e.g. HTTP routing, TLS termination, request authentication etc.). We will then assign a confidentiality, integrity and availability impact based on a worst-case scenario of how each compromise could potentially affect business data processed by the generic deployment.

Data Name / TypeNotesConfidentialityIntegrityAvailability
Static Configuration DataStatic configuration data is used to configure Envoy Gateway at startup. This data structure allows for a Provider to be set, which Envoy Gateway calls to establish its runtime configuration, resolve services and persist data. Unauthorised modification of static configuration data could enable the Envoy Gateway admin interface to be configured, logging parameters to be modified, global rate limiting configuration to be misconfigured, or malicious extensions registered for the Envoy Gateway Control Plane. A compromise of confidentiality could potentially give an attacker some useful reconnaissance information. A compromise of the availability of this information at startup time would result in Envoy Gateway starting with default parameters.MediumHighLow
Dynamic Configuration DataDynamic configuration data represents the desired state of the Data Plane, and is defined through Envoy Gateway and Gateway API Kubernetes resources. Unauthorised modification of this data could lead to vulnerabilities in an organisation’s Data Plane infrastructure via misconfiguration of an EnvoyProxy custom resource. Misconfiguration of Gateway API objects such as HTTPRoutes or TLSRoutes could result in traffic being directed to incorrect backends. A compromise of confidentiality could potentially give an attacker some useful reconnaissance information. A compromise of the availability of this information could result in tenant application traffic not being routable until the configuration is recovered and reapplied.MediumHighMedium
TLS Private KeysTLS Private Keys, typically in PEM format, are used to initiate secure connections and encrypt communications. In the context of this threat model, private keys will be associated with the server side of an inbound TLS connection being terminated at a secure gateway configured through Envoy Gateway. Unauthorised exposure could lead to security threats such as person-in-the-middle attacks, whereby the confidentiality or integrity of business data could be compromised. A compromise of integrity may lead to similar consequences if an attacker could insert their own key material. An availability compromise could lead to tenant services being unavailable until new key material is generated and an appropriate CSR submitted.HighHighMedium
TLS CertificatesX.509 certificates represent the binding of a public key (associated with the private key described above) to an identity in a TLS handshake. If an attacker could compromise the integrity of a certificate, they may be able to bind the identity of a TLS termination point to a key pair under their control, enabling person-in-the middle attacks. An availability compromise could lead to tenant services being unavailable until new key material is generated and an appropriate CSR submitted.LowHighMedium
JWKsJWK (JSON Web Key) containing a public key used to validate JWTs for the client authentication use case considered in this threat model. If an attacker could compromise the integrity of a JWK or JSON web key set (JWKS), they could potentially authenticate to a service maliciously. Unavailability of an endpoint exposing JWKs could lead to client requests which require authentication being denied.LowHighMedium
JWTsJWTs, formatted as compact, URL-safe JSON data structures, are utilised for the client authentication use case considered in this threat model. Maintaining their confidentiality and integrity is vital to prevent unauthorised access and ensure correct user identification.HighHighLow
OIDC credentialsIn OIDC authentication scenarios, the application credentials are represented by a client ID and a client secret. A compromise of its confidentiality or integrity could allow malicious actors to impersonate the application, potentially being able to access resources on behalf of the application and request ID tokens on behalf of users. Unavailability of this data would produce a rejection of the requests coming from legitimate users.HighHighMedium
Basic authentiation password hashesIn basic authentication scenarios, passwords are stored as Kubernetes secrets in htpasswd format, where each entry is formed by the username and the hashed password. A compromise of these credentials’ confidentiality and integrity could lead to unauthorised access to the application. Unavailability of these credentials will cause login failures from the application users.HighHighMedium

CIA Impact Assessment

PriorityDescription
Confidentiality
HighCompromise of sensitive client data
MediumInformation leaked which could be useful for attacker reconnaissance
LowNon-sensitive information leakage
Integrity
HighCompromise of source code repositories and gateway deployments
MediumTraffic routing fails due to misconfiguration / invalid configuration
LowNon-critical operation is blocked due to misconfiguration / invalid configuration
Availability
HighLarge scale DoS
MediumTenant application is blocked for a significant period
LowTenant application is blocked for a short period

Data Flow Diagrams

The Data Flow Diagrams (DFDs) below describe the flow of data between the various processes, entities and data stores in a system, as well as the trust boundaries between different user roles and network interfaces. The DFDs are drawn at two different levels, starting at L0 (high-level system view) and increasing in granularity (to L1).

DFD L0

DFD L0

DFD L1

DFD L1

Key Threats and Recommendations

The scope of this threat model led to us categorising threats into priorities of High, Medium or Low; notably in a production implementation some of the threats’ prioritisation may be upgraded or downgraded depending on the business context and data classification.

Risk vs. Threat

For every finding, the risk and threat are stated. Risk defines the potential for negative outcome while threat defines the event that causes the negative outcome.

Threat Categorization

Throughout this threat model, we categorised threats into different areas based on their origin and the segment of the system that they impact. Here’s an overview of each category:

Container Security (CS): These threats are general to containerised applications. Therefore, they are not associated with Envoy Gateway or the Gateway API and could occur in most containerised workloads. They can originate from misconfigurations or vulnerabilities in the orchestrator or the container.

Gateway API (GW): These are threats related to the Gateway API that could affect any of its implementations. Malicious actors could benefit from misconfigurations or excessive permissions on the Gateway API resources (e.g. xRoutes or Gateways) to compromise the confidentiality, integrity, or availability of the application.

Envoy Gateway (EG): These threats are associated with specific configurations or features from Envoy Gateway or Envoy Proxy. If not set properly, these features could be leveraged to gain unauthorised access to protected resources.

Threat Actors

In order to provide a realistic set of threats that is applicable to most organisations, we de-scoped the most advanced and hard to mitigate threat actors as described below:

In Scope Threat Actors

When considering internal threat actors, we chose to follow the security model of the Kubernetes Gateway API.

Internal Attacker
  • Cluster Operator: The cluster operator (ops) is responsible for administration of entire clusters. They manage policies, network access, application permissions.

  • Application Developer: The application developer (dev) is responsible for defining their application configuration (e.g. timeouts, request matching/filter) and Service composition (e.g. path routing to backends).

  • Application Administrator: The application admin has administrative access to some namespaces within a cluster, but not the cluster as a whole.

External Attacker
  • Vandal: Script kiddie, trespasser

  • Motivated Individual: Political activist, thief, terrorist

  • Organised Crime: Syndicates, state-affiliated groups

Out of Scope Threat Actors

External Actors
  • Infrastructure Provider: The infrastructure provider (infra) is responsible for the overall environment that the cluster(s) are operating in. Examples include: the cloud provider, or the PaaS provider in a company.

  • Cloud Service Insider: Employee, external contractor, temporary worker

  • Foreign Intelligence Services (FIS): Nation states

High Priority Findings

EGTM-001 Usage of self-signed certificates

IDUIDCategoryPriority
EGTM-001EGTM-GW-001Gateway APIHigh

Risk: Self-signed certificates (which do not comply with PKI best practices) could lead to unauthorised access to the private key associated with the certificate used for inbound TLS termination at Envoy Proxy, compromising the confidentiality and integrity of proxied traffic.

Threat: Compromise of the private key associated with the certificate used for inbound TLS terminating at Envoy Proxy.

Recommendation: The Envoy Gateway quickstart demonstrates how to set up a Secure Gateway using an example where a self-signed root certificate is created using openssl. As stated in the Envoy Gateway documentation, this is not a suitable configuration for Production usage. It is recommended that PKI best practices are followed, whereby certificates are signed by an Intermediary CA which sits underneath an organisational 'offline' Root CA.

PKI best practices should also apply to the management of client certificates when using mTLS. The Envoy Gateway mTLS guide shows how to set up client certificates using self-signed certificates. In the same way as gateway certificates and, as mentioned in the documentation, this configuration should not be used in production environments.

EGTM-002 Private keys are stored as Kubernetes secrets

IDUIDCategoryPriority
EGTM-002EGTM-CS-001Container SecurityHigh

Risk: There is a risk that a threat actor could compromise the Kubernetes secret containing the Envoy private key, allowing the attacker to decrypt Envoy Proxy traffic, compromising the confidentiality of proxied traffic.

Threat: Kubernetes secret containing the Envoy private key is compromised and used to decrypt proxied traffic.

Recommendation: Certificate management best practices mandate short-lived key material where practical, meaning that a mechanism for rotation of private keys and certificates is required, along with a way for certificates to be mounted into Envoy containers. If Kubernetes secrets are used, when a certificate expires, the associated secret must be updated, and Envoy containers must be redeployed. Instead of a manual configuration, it is recommended that cert-manager is used.

EGTM-004 Usage of ClusterRoles with wide permissions

IDUIDCategoryPriority
EGTM-004EGTM-K8-002Container SecurityHigh

Risk: There is a risk that a threat actor could abuse misconfigured RBAC to access the Envoy Gateway ClusterRole (envoy-gateway-role) and use it to expose all secrets across the cluster, thus compromising the confidentiality and integrity of tenant data.

Threat: Compromised Envoy Gateway or misconfigured ClusterRoleBinding (envoy-gateway-rolebinding) to Envoy Gateway ClusterRole (envoy-gateway-role), provides access to resources and secrets in different namespaces.

Recommendation: Users should be aware that Envoy Gateway uses a ClusterRole (envoy-gateway-role) when deployed via the Helm chart, to allow management of Envoy Proxies across different namespaces. This ClusterRole is powerful and includes the ability to read secrets in namespaces which may not be within the purview of Envoy Gateway.

Kubernetes best-practices involve restriction of ClusterRoleBindings, with the use of RoleBindings where possible to limit access per namespace by specifying the namespace in metadata. Namespace isolation reduces the impact of compromise from cluster-scoped roles. Ideally, fine-grained K8s roles should be created per the principle of least privilege to ensure they have the minimum access necessary for role functions.

The pull request #1656 introduced the use of Roles and RoleBindings in namespaced mode. This feature can be leveraged to reduce the amount of permissions required by the Envoy Gateway.

EGTM-007 Misconfiguration of Envoy Gateway dynamic config

IDUIDCategoryPriority
EGTM-007EGTM-EG-002Envoy GatewayHigh

Risk: There is a risk that a threat actor could exploit misconfigured Kubernetes RBAC to create or modify Gateway API resources with no business need, potentially leading to the compromise of the confidentiality, integrity, and availability of resources and traffic within the cluster.

Threat: Unauthorised creation or misconfiguration of Gateway API resources by a threat actor with cluster-scoped access.

Recommendation: Configure the apiGroup and resource fields in RBAC policies to restrict access to Gateway and GatewayClass resources. Enable namespace isolation by using the namespace field, preventing unauthorised access to gateways in other namespaces.

EGTM-009 Co-tenant misconfigures resource across namespaces

IDUIDCategoryPriority
EGTM-009EGTM-GW-002Gateway APIHigh

Risk: There is a risk that a co-tenant misconfigures Gateway or Route resources, compromising the confidentiality, integrity, and availability of routed traffic through Envoy Gateway.

Threat: Malicious or accidental co-tenant misconfiguration of Gateways and Routes associated with other application teams.

Recommendation: Dedicated Envoy Gateways should be provided to each tenant within their respective namespace. A one-to-one relationship should be established between GatewayClass and Gateway resources, meaning that each tenant namespace should have their own GatewayClass watched by a unique Envoy Gateway Controller as defined here in the Deployment Mode documentation.

Application Admins should have write permissions on the Gateway resource, but only in their specific namespaces, and Application Developers should only hold write permissions on Route resources. To enact this access control schema, follow the Write Permissions for Advanced 4 Tier Model described in the Kubernetes Gateway API security model. Examples of secured gateway-route topologies can be found here within the Kubernetes Gateway API docs.

Optionally, consider a GitOps model, where only the GitOps operator has the permission to deploy or modify custom resources in production.

EGTM-014 Malicious image admission

IDUIDCategoryPriority
EGTM-014EGTM-CS-006Container SecurityHigh

Risk: There is a risk that a supply chain attack on Envoy Gateway results in an arbitrary compromise of the confidentiality, integrity or availability of tenant data.

Threat: Supply chain threat actor introduces malicious code into Envoy Gateway or Proxy.

Recommendation: The Envoy Gateway project should continue to work towards conformance with supply-chain security best practices throughout the project lifecycle (for example, as set out in the CNCF Software Supply Chain Best Practices Whitepaper). Adherence to Supply-chain Levels for Software Artefacts (SLSA) standards is crucial for maintaining the security of the system. Employ version control systems to monitor the source and build platforms and assign responsibility to a specific stakeholder.

Integrate a supply chain security tool such as Sigstore, which provides native capabilities for signing and verifying container images and software artefacts. Software Bill of Materials (SBOM), Vulnerability Exploitability eXchange (VEX), and signed artefacts should also be incorporated into the security protocol.

EGTM-020 Out of date or misconfigured Envoy Proxy image

IDUIDCategoryPriority
EGTM-020EGTM-CS-009Container SecurityHigh

Risk: There is a risk that a threat actor exploits an Envoy Proxy vulnerability to remote code execution (RCE) due to out of date or misconfigured Envoy Proxy pod deployment, compromising the confidentiality and integrity of Envoy Proxy along with the availability of the proxy service.

Threat: Deployment of an Envoy Proxy or Gateway image containing exploitable CVEs.

Recommendation: Always use the latest version of the Envoy Proxy image. Regularly check for updates and patch the system as soon as updates become available. Implement a CI/CD pipeline that includes security checks for images and prevents deployment of insecure configurations. A suitable tool should be chosen to provide container vulnerability scanning to mitigate the risk of known vulnerabilities.

Utilise the Pod Security Admission controller to enforce Pod Security Standards and configure the pod security context to limit its capabilities per the principle of least privilege.

EGTM-022 Credentials are stored as Kubernetes Secrets

IDUIDCategoryPriority
EGTM-022EGTM-CS-010Container SecurityHigh

Risk: There is a risk that the OIDC client secret (for OIDC authentication) and user password hashes (for basic authentication) get leaked due to misconfigured RBAC permissions.

Threat: Unauthorised access to the application due to credential leakage.

Recommendation: Ensure that only authorised users and service accounts are able to access secrets. This is especially important in namespaces where SecurityPolicy objects are configured, since those namespaces are the ones to store secrets containing the client secret (in OIDC scenarios) and user password hashes (in basic authentication scenarios).

To do so, minimise the use of ClusterRoles and Roles allowing listing and getting secrets. Perform periodic audits of RBAC permissions.

EGTM-023 Weak Authentication

IDUIDCategoryPriority
EGTM-023EGTM-EG-007Envoy GatewayHigh

Risk: There is a risk of unauthorised access due to the use of basic authentication, which does not enforce any password restriction in terms of complexity and length. In addition, password hashes are stored in SHA1 format, which is a deprecated hashing function.

Threat: Unauthorised access to the application due to weak authentication mechanisms.

Recommendation: It is recommended to make use of stronger authentication mechanisms (i.e. JWT authentication and OIDC authentication) instead of basic authentication. These authentication mechanisms have many advantages, such as the use of short-lived credentials and a central management of security policies through the identity provider.

Medium Priority Findings

EGTM-008 Misconfiguration of Envoy Gateway static config

IDUIDCategoryPriority
EGTM-008EGTM-EG-003Envoy GatewayMedium

Risk: There is a risk of a threat actor misconfiguring static config and compromising the integrity of Envoy Gateway, ultimately leading to the compromised confidentiality, integrity, or availability of tenant data and cluster resources.

Threat: Accidental or deliberate misconfiguration of static configuration leads to a misconfigured deployment of Envoy Gateway, for example logging parameters could be modified or global rate limiting configuration misconfigured.

Recommendation: Implement a GitOps model, utilising Kubernetes' Role-Based Access Control (RBAC) and adhering to the principle of least privilege to minimise human intervention on the cluster. For instance, tools like Flux and ArgoCD can be used for declarative GitOps deployments, ensuring all changes are tracked and reviewed. Additionally, configure your source control management (SCM) system to include mandatory pull request (PR) reviews, commit signing, and protected branches to ensure only authorised changes can be committed to the start-up configuration.

EGTM-010 Weak pod security contexts and policies

IDUIDCategoryPriority
EGTM-010EGTM-CS-005Container SecurityMedium

Risk: There is a risk that a threat actor exploits a weak pod security context, compromising the CIA of a node and the resources / services which run on it.

Threat: Threat Actor who has compromised a pod exploits weak security context to escape to a node, potentially leading to the compromise of Envoy Proxy or Gateway running on the same node.

Recommendation: To mitigate this risk, apply Pod Security Standards at a minimum of Baseline level to all namespaces, especially those containing Envoy Gateway and Proxy Pods. Pod security standards are implemented through K8s Pod Security Admission to provide admission control modes (enforce, audit, and warn) for namespaces. Pod security standards can be enforced by namespace labels as shown here, to enforce a baseline level of pod security to specific namespaces.

Further enhance the security by implementing a sandboxing solution such as gVisor for Envoy Gateway and Proxy Pods to isolate the application from the host kernel. This can be set within the runtimeClassName of the Pod specification.

EGTM-012 ClusterRoles and Roles with permission to deploy ReferenceGrants

IDUIDCategoryPriority
EGTM-012EGTM-GW-004Gateway APIMedium

Risk: There is a risk that a threat actor could abuse excessive RBAC privileges to create ReferenceGrant resources. These resources could then be used to create cross-namespace communication, leading to unauthorised access to the application. This could compromise the confidentiality and integrity of resources and configuration in the affected namespaces and potentially disrupt the availability of services that rely on these object references.

Threat: A ReferenceGrant is created, which validates traffic to cross namespace trust boundaries without a valid business reason, such as a route in one tenant's namespace referencing a backend in another.

Recommendation: Ensure that the ability to create ReferenceGrant resources is restricted to the minimum number of people. Pay special attention to ClusterRoles that allow that action.

EGTM-018 Network Denial of Service (DoS)

IDUIDCategoryPriority
EGTM-018EGTM-GW-006Gateway APIMedium

Risk: There is a risk that malicious requests could lead to a Denial of Service (DoS) attack, thereby reducing API gateway availability due to misconfigurations in rate-limiting or load balancing controls, or a lack of route timeout enforcement.

Threat: Reduced API gateway availability due to an attacker's maliciously crafted request (e.g., QoD) potentially inducing a Denial of Service (DoS) attack.

Recommendation: To ensure high availability and to mitigate potential security threats, adhere to the Envoy Gateway documentation for the configuration of a rate-limiting filter and load balancing.

Further, adhere to best practices for configuring Envoy Proxy as an edge proxy documented here within the EnvoyProxy docs. This involves configuring TCP and HTTP proxies with specific settings, including restricting access to the admin endpoint, setting the overload manager and listener / cluster buffer limits, enabling use_remote_address, setting connection and stream timeouts, limiting maximum concurrent streams, setting initial stream window size limit, and configuring action on headers_with_underscores.

Path normalisation should be enabled to minimise path confusion vulnerabilities. These measures help protect against volumetric threats such as Denial of Service (DoS) attacks. Utilise custom resources to implement policy attachment, thereby exposing request limit configuration for route types.

EGTM-019 JWT-based authentication replay attacks

IDUIDCategoryPriority
EGTM-019EGTM-DP-004Container SecurityMedium

Risk: There is a risk that replay attacks using stolen or reused JSON Web Tokens (JWTs) can compromise transmission integrity, thereby undermining the confidentiality and integrity of the data plane.

Threat: Transmission integrity is compromised due to replay attacks using stolen or reused JSON Web Tokens (JWTs).

Recommendation: Comply with JWT best practices for enhanced security, paying special attention to the use of short-lived tokens, which reduce the window of opportunity for a replay attack. The exp claim can be used to set token expiration times.

EGTM-024 Excessive privileges via extension policies

IDUIDCategoryPriority
EGTM-024EGTM-EG-008Envoy GatewayMedium

Risk: There is a risk of developers getting more privileges than required due to the use of SecurityPolicy, ClientTrafficPolicy, EnvoyPatchPolicy and BackendTrafficPolicy. These resources can be attached to a Gateway resource. Therefore, a developer with permission to deploy them would be able to modify a Gateway configuration by targeting the gateway in the policy manifest. This conflicts with the Advanced 4 Tier Model, where developers do not have write permissions on Gateways.

Threat: Excessive developer permissions lead to a misconfiguration and/or unauthorised access.

Recommendation: Considering the Tenant C scenario (represented in the Architecture Diagram), if a developer can create SecurityPolicy, ClientTrafficPolicy, EnvoyPatchPolicy or BackendTrafficPolicy objects in namespace C, they would be able to modify a Gateway configuration by attaching the policy to the gateway. In such scenarios, it is recommended to either:

a. Create a separate namespace, where developers have no permissions, to host tenant C's gateway. Note that, due to design decisions, the SecurityPolicy/EnvoyPatchPolicy/ClientTrafficPolicy/BackendTrafficPolicy object can only target resources deployed in the same namespace. Therefore, having a separate namespace for the gateway would prevent developers from attaching the policy to the gateway.

b. Forbid the creation of these policies for developers in namespace C.

On the other hand, in scenarios similar to tenants A and B, where a shared gateway namespace is in place, this issue is more limited. Note that in this scenario, developers don't have access to the shared gateway namespace.

In addition, it is important to mention that EnvoyPatchPolicy resources can also be attached to GatewayClass resources. This means that, in order to comply with the Advanced 4 Tier model, individuals with the Application Administrator role should not have access to this resource either.

Low Priority Findings

EGTM-003 Misconfiguration leads to insecure TLS settings

IDUIDCategoryPriority
EGTM-003EGTM-EG-001Envoy GatewayLow

Risk: There is a risk that a threat actor could downgrade the security of proxied connections by configuring a weak set of cipher suites, compromising the confidentiality and integrity of proxied traffic.

Threat: Exploit weak cipher suite configuration to downgrade security of proxied connections.

Recommendation: Users operating in highly regulated environments may need to tightly control the TLS protocol and associated cipher suites, blocking non-conforming incoming connections to the gateway.

EnvoyProxy bootstrap config can be customised as per the customise EnvoyProxy documentation. In addition, from v.1.0.0, it is possible to configure common TLS properties for a Gateway or XRoute through the ClientTrafficPolicy object.

EGTM-005 Envoy Gateway Helm chart deployment does not set AppArmor and Seccomp profiles

IDUIDCategoryPriority
EGTM-005EGTM-CP-002Container SecurityLow

Risk: Threat actor who has obtained access to Envoy Gateway pod could exploit the lack of AppArmor and Seccomp profiles in the Envoy Gateway deployment to attempt a container breakout, given the presence of an exploitable vulnerability, potentially impacting the confidentiality and integrity node resources.

Threat: Unauthorised syscalls and malicious code running in the Envoy Gateway pod.

Recommendation: Implement AppArmor policies by setting <container_name>: <profile_ref> within container.apparmor.security.beta.kubernetes.io (note, this config is set per container). Well-defined AppArmor policies may provide greater protection from unknown threats.

Enforce Seccomp profiles by setting the seccompProfile under securityContext. Ideally, a fine-grained profile should be used to restrict access to only necessary syscalls, however the --seccomp-default flag can be set to resort to RuntimeDefault which provides a container runtime specific. Example seccomp profiles can be found here.

To further enhance pod security, consider implementing SELinux via seLinuxOptions for additional syscall attack surface reduction. Setting readOnlyRootFilesystem == true enforces an immutable root filesystem, preventing the addition of malicious binaries to the PATH and increasing the attack cost. Together, these configuration items improve the pods Security Context.

EGTM-006 Envoy Proxy pods deployed with a shell enabled

IDUIDCategoryPriority
EGTM-006EGTM-CS-004Container SecurityLow

Risk: There is a risk that a threat actor exploits a vulnerability in Envoy Proxy to expose a reverse shell, enabling them to compromise the confidentiality, integrity and availability of tenant data via a secondary attack.

Threat: If an external attacker managed to exploit a vulnerability in Envoy, the presence of a shell would be greatly helpful for the attacker in terms of potentially pivoting, escalating, or establishing some form of persistence.

Recommendation: By default, Envoy uses a distroless image since v.0.6.0, which does not ship a shell. Therefore, ensure EnvoyProxy image is up-to-date and patched with the latest stable version.

If using private EnvoyProxy images, use a lightweight EnvoyProxy image without a shell or debugging tool(s) which may be useful for an attacker.

An AuditPolicy (audit.k8s.io/v1beta1) can be configured to record API calls made within your cluster, allowing for identification of malicious traffic and enabling incident response. Requests are recorded based on stages which delineate between the lifecycle stage of the request made (e.g., RequestReceived, ResponseStarted, & ResponseComplete).

EGTM-011 Route Bindings on custom labels

IDUIDCategoryPriority
EGTM-011EGTM-GW-003Gateway APILow

Risk: There is a risk that a gateway owner (or someone with the ability to set namespace labels) maliciously or accidentally binds routes across namespace boundaries, potentially compromising the confidentiality and integrity of traffic in a multitenant scenario.

Threat: If a Route Binding within a Gateway Listener is configured based on a custom label, it could allow a malicious internal actor with the ability to label namespaces to change the set of namespaces supported by the Gateway.

Recommendation: Consider the use of custom admission control to restrict what labels can be set on namespaces through tooling such as Kubewarden, Kyverno, and OPA Gatekeeper. Route binding should follow the Kubernetes Gateway API security model, as shown here, to connect gateways in different namespaces.

EGTM-013 GatewayClass namespace validation is not configured

IDUIDCategoryPriority
EGTM-013EGTM-GW-005Gateway APILow

Risk: There is a risk that an unauthorised actor deploys an unauthorised GatewayClass due to GatewayClass namespace validation not being configured, leading to non-compliance with business and security requirements.

Threat: Unauthorised deployment of Gateway resource via GatewayClass template which crosses namespace trust boundaries.

Recommendation: Leverage GatewayClass namespace validation to limit the namespaces where GatewayClasses can be run through a tool such as OPA Gatekeeper. Reference pull request #24 within gatekeeper-library which outlines how to add GatewayClass namespace validation through a GatewayClassNamespaces API resource kind within the constraints.gatekeeper.sh/v1beta1 apiGroup.

EGTM-015 ServiceAccount token authentication

IDUIDCategoryPriority
EGTM-015EGTM-CS-007Container SecurityLow

Risk: There is a risk that threat actors could exploit ServiceAccount tokens for illegitimate authentication, thereby leading to privilege escalation and the undermining of gateway API resources' integrity, confidentiality, and availability.

Threat: The threat arises from threat actors impersonating the envoy-gateway ServiceAccount through the replay of ServiceAccount tokens, thereby achieving escalated privileges and gaining unauthorised access to Kubernetes resources.

Recommendation: Limit the creation of ServiceAccounts to only when necessary, specifically refraining from using default service account tokens, especially for high-privilege service accounts. For legacy clusters running Kubernetes version 1.21 or earlier, note that ServiceAccount tokens are long-lived by default. To disable the automatic mounting of the service account token, set automountServiceAccountToken: false in the PodSpec.

EGTM-016 Misconfiguration leads to lack of Envoy Proxy access activity visibility

IDUIDCategoryPriority
EGTM-016EGTM-EG-004Envoy GatewayLow

Risk: There is a risk that threat actors establish persistence and move laterally through the cluster unnoticed due to limited visibility into access and application-level activity.

Threat: Threat actors establish persistence and move laterally through the cluster unnoticed.

Recommendation: Configure access logging in the EnvoyProxy. Use ProxyAccessLogFormatType (Text or JSON) to specify the log format and ensure that the logs are sent to the desired sink types by setting the ProxyAccessLogSinkType. Make use of FileEnvoyProxyAccessLog or OpenTelemetryEnvoyProxyAccessLog to configure File and OpenTelemetry sinks, respectively. If the settings aren't defined, the default format is sent to stdout.

Additionally, consider leveraging a central logging mechanism such as Fluentd to enhance visibility into access activity and enable effective incident response (IR).

EGTM-017 Misconfiguration leads to lack of Envoy Gateway activity visibility

IDUIDCategoryPriority
EGTM-017EGTM-EG-005Envoy GatewayLow

Risk: There is a risk that an insider misconfigures an envoy gateway component and goes unnoticed due to a low-touch logging configuration (via default) which responsible stakeholders are not aptly aware of or have immediate access to.

Threat: The threat emerges from an insider misconfiguring an Envoy Gateway component without detection.

Recommendation: Configure the logging level of the Envoy Gateway using the 'level' field in EnvoyGatewayLogging. Ensure the appropriate logging levels are set for relevant components such as 'gateway-api', 'xds-translator', or 'global-ratelimit'. If left unspecified, the logging level defaults to "info", which may not provide sufficient detail for security monitoring.

Employ a centralised logging mechanism, like Fluentd, to enhance visibility into application-level activity and to enable efficient incident response.

EGTM-021 Exposed Envoy Proxy admin interface

IDUIDCategoryPriority
EGTM-021EGTM-EG-006Envoy GatewayLow

Risk: There is a risk that the admin interface is exposed without valid business reason, increasing the attack surface.

Threat: Exposed admin interfaces give internal attackers the option to affect production traffic in unauthorised ways, and the option to exploit any vulnerabilities which may be present in the admin interface (e.g. by orchestrating malicious GET requests to the admin interface through CSRF, compromising Envoy Proxy global configuration or shutting off the service entirely e.g. /quitquitquit).

Recommendation: The Envoy Proxy admin interface is only exposed to localhost, meaning that it is secure by default. However, due to the risk of misconfiguration, this recommendation is included.

Due to the importance of the admin interface, it is recommended to ensure that Envoy Proxies have not been accidentally misconfigured to expose the admin interface to untrusted networks.

EGTM-025 Envoy Proxy pods deployed running as root user in the container

IDUIDCategoryPriority
EGTM-025EGTM-CS-011Container SecurityLow

Risk: The presence of a vulnerability, be it in the kernel or another system component, when coupled with containers running as root, could enable a threat actor to escape the container, thereby compromising the confidentiality, integrity, or availability of cluster resources

Threat: The Envoy Proxy container’s root-user configuration can be leveraged by an attacker to escalate privileges, execute a container breakout, and traverse across trust boundaries.

Recommendation: By default, Envoy Gateway deployments do not use root users. Nonetheless, in case a custom image or deployment manifest is to be used, make sure Envoy Proxy pods run as a non-root user with a high UID within the container.

Set runAsUser and runAsGroup security context options to specific UIDs (e.g., runAsUser: 1000 & runAsGroup: 3000) to ensure the container operates with the stipulated non-root user and group ID. If using helm chart deployment, define the user and group ID in the values.yaml file or via the command line during helm install / upgrade.

Appendix

In Scope Threat Actor Details

Threat ActorCapabilityPersonal MotivationEnvoy Gateway Attack Samples
Application DeveloperLeverage internal knowledge and personal access to the Envoy Gateway infrastructure to move laterally and transit trust boundariesDisgruntled / personal grievances.

Financial incentives
Misconfigure XRoute resources to expose internal applications.

Misconfigure SecurityPolicy objects, reducing the security posture of an application.
Application AdministratorAbuse privileged status to disrupt operations and tenant cluster services through Envoy Gateway misconfigDisgruntled / personal grievances.

Financial incentives
Create malicious routes to internal applications.

Introduce malicious Envoy Proxy images.

Expose the Envoy Proxy Admin interface.
Cluster OperatorAlter application-level deployments by misconfiguring resource dependencies & SCM to introduce vulnerabilitiesDisgruntled / personal grievances.

Financial incentives.

Notoriety
Deploy malicious resources to expose internal applications.

Access authentication secrets.

Fall victim to phishing attacks and inadvertently share authentication credentials to cloud infrastructure or Kubernetes clusters.
Vandal: Script Kiddie, TrespasserUses publicly available tools and applications (Nmap,Metasploit, CVE PoCs)Curiosity.

Personal fame through defacement / denial of service of prominent public facing web resources
Small scale DOS.

Launches prepackaged exploits, runs crypto mining tools.

Exploit public-facing application services such as the bastion host to gain an initial foothold in the environment
Motivated individual: Political activist, Thief, TerroristWrite tools and exploits required for their means if sufficiently motivated.

Tend to use these in a targeted fashion against specific organisations. May combine publicly available exploits in a targeted fashion. Tamper with open source supply chains
Personal Gain (Political or Ideological)Phishing, DDOS, exploit known vulnerabilities.

Compromise third-party components such as Helm charts and container images to inject malicious codes to propagate access throughout the environment.
Organised crime: syndicates, state-affiliated groupsWrite tools and exploits required for their means.

Tend to use these in a non-targeted fashion, unless motivation is sufficiently high.

Devotes considerable resources, writes exploits, can bribe/coerce, can launch targeted attacks
Ransom.

Mass extraction of PII / credentials / PCI data.

Financial incentives
Social Engineering, phishing, ransomware, coordinated attacks.

Intercept and replay JWT tokens (via MiTM) between tenant user(s) and envoy gateway to modify app configs in-transit

Identified Threats by Priority

IDUIDCategoryRiskThreatPriorityRecommendation
EGTM-001EGTM-GW-001Gateway APISelf-signed certificates (which do not comply with PKI best practices) could lead to unauthorised access to the private key associated with the certificate used for inbound TLS termination at Envoy Proxy, compromising the confidentiality and integrity of proxied traffic.

Compromise of the private key associated with the certificate used for inbound TLS terminating at Envoy Proxy.

HighThe Envoy Gateway quickstart guide demonstrates how to set up a Secure Gateway using an example where a self-signed root certificate is created using openssl. As stated in the Envoy Gateway documentation, this is not a suitable configuration for Production usage. It is recommended that PKI best practices are followed, whereby certificates are signed by an Intermediary CA which sits underneath an organisational 'offline' Root CA.

PKI best practices should also apply to the management of client certificates when using mTLS. The Envoy Gateway mTLS guide shows how to set up client certificates using self-signed certificates. In the same way as gateway certificates and, as mentioned in the documentation, this configuration should not be used in production environments.
EGTM-002EGTM-CS-001Container SecurityThere is a risk that a threat actor could compromise the Kubernetes secret containing the Envoy private key, allowing the attacker to decrypt Envoy Proxy traffic, compromising the confidentiality of proxied traffic.

Kubernetes secret containing the Envoy private key is compromised and used to decrypt proxied traffic.

HighCertificate management best practices mandate short-lived key material where practical, meaning that a mechanism for rotation of private keys and certificates is required, along with a way for certificates to be mounted into Envoy containers. If Kubernetes secrets are used, when a certificate expires, the associated secret must be updated, and Envoy containers must be redeployed. Instead of a manual configuration, it is recommended that cert-manager is used.
EGTM-004EGTM-K8-002Container SecurityThere is a risk that a threat actor could abuse misconfigured RBAC to access the Envoy Gateway ClusterRole (envoy-gateway-role) and use it to expose all secrets across the cluster, thus compromising the confidentiality and integrity of tenant data.

Compromised Envoy Gateway or misconfigured ClusterRoleBinding (envoy-gateway-rolebinding) to Envoy Gateway ClusterRole (envoy-gateway-role), provides access to resources and secrets in different namespaces.

HighUsers should be aware that Envoy Gateway uses a ClusterRole (envoy-gateway-role) when deployed via the Helm chart, to allow management of Envoy Proxies across different namespaces. This ClusterRole is powerful and includes the ability to read secrets in namespaces which may not be within the purview of Envoy Gateway.

Kubernetes best-practices involve restriction of ClusterRoleBindings, with the use of RoleBindings where possible to limit access per namespace by specifying the namespace in metadata. Namespace isolation reduces the impact of compromise from cluster-scoped roles. Ideally, fine-grained K8s roles should be created per the principle of least privilege to ensure they have the minimum access necessary for role functions.

The pull request #1656 introduced the use of Roles and RoleBindings in namespaced mode. This feature can be leveraged to reduce the amount of permissions required by the Envoy Gateway.
EGTM-007EGTM-EG-002Envoy GatewayThere is a risk that a threat actor could exploit misconfigured Kubernetes RBAC to create or modify Gateway API resources with no business need, potentially leading to the compromise of the confidentiality, integrity, and availability of resources and traffic within the cluster.

Unauthorised creation or misconfiguration of Gateway API resources by a threat actor with cluster-scoped access.

HighConfigure the apiGroup and resource fields in RBAC policies to restrict access to Gateway and GatewayClass resources. Enable namespace isolation by using the namespace field, preventing unauthorised access to gateways in other namespaces.
EGTM-009EGTM-GW-002Gateway APIThere is a risk that a co-tenant misconfigures Gateway or Route resources, compromising the confidentiality, integrity, and availability of routed traffic through Envoy Gateway.

Malicious or accidental co-tenant misconfiguration of Gateways and Routes associated with other application teams.

HighDedicated Envoy Gateways should be provided to each tenant within their respective namespace. A one-to-one relationship should be established between GatewayClass and Gateway resources, meaning that each tenant namespace should have their own GatewayClass watched by a unique Envoy Gateway Controller as defined here in the Deployment Mode documentation.

Application Admins should have write permissions on the Gateway resource, but only in their specific namespaces, and Application Developers should only hold write permissions on Route resources. To enact this access control schema, follow the Write Permissions for Advanced 4 Tier Model described in the Kubernetes Gateway API security model. Examples of secured gateway-route topologies can be found here within the Kubernetes Gateway API docs.

Optionally, consider a GitOps model, where only the GitOps operator has the permission to deploy or modify custom resources in production.
EGTM-014EGTM-CS-006Container SecurityThere is a risk that a supply chain attack on Envoy Gateway results in an arbitrary compromise of the confidentiality, integrity or availability of tenant data.

Supply chain threat actor introduces malicious code into Envoy Gateway or Proxy.

HighThe Envoy Gateway project should continue to work towards conformance with supply-chain security best practices throughout the project lifecycle (for example, as set out in the CNCF Software Supply Chain Best Practices Whitepaper. Adherence to Supply-chain Levels for Software Artefacts (SLSA) standards is crucial for maintaining the security of the system. Employ version control systems to monitor the source and build platforms and assign responsibility to a specific stakeholder.

Integrate a supply chain security tool such as Sigstore, which provides native capabilities for signing and verifying container images and software artefacts. Software Bill of Materials (SBOM), Vulnerability Exploitability eXchange (VEX), and signed artefacts should also be incorporated into the security protocol.
EGTM-020EGTM-CS-009Container SecurityThere is a risk that a threat actor exploits an Envoy Proxy vulnerability to remote code execution (RCE) due to out of date or misconfigured Envoy Proxy pod deployment, compromising the confidentiality and integrity of Envoy Proxy along with the availability of the proxy service.

Deployment of an Envoy Proxy or Gateway image containing exploitable CVEs.

HighAlways use the latest version of the Envoy Proxy image. Regularly check for updates and patch the system as soon as updates become available. Implement a CI/CD pipeline that includes security checks for images and prevents deployment of insecure configurations. A tool such as Snyk can be used to provide container vulnerability scanning to mitigate the risk of known vulnerabilities.

Utilise the Pod Security Admission controller to enforce Pod Security Standards and configure the pod security context to limit its capabilities per the principle of least privilege.
EGTM-022EGTM-CS-010Container SecurityThere is a risk that the OIDC client secret (for OIDC authentication) and user password hashes (for basic authentication) get leaked due to misconfigured RBAC permissions.

Unauthorised access to the application due to credential leakage.

HighEnsure that only authorised users and service accounts are able to access secrets. This is especially important in namespaces where SecurityPolicy objects are configured, since those namespaces are the ones to store secrets containing the client secret (in OIDC scenarios) and user password hashes (in basic authentication scenarios).

To do so, minimise the use of ClusterRoles and Roles allowing listing and getting secrets. Perform periodic audits of RBAC permissions.
EGTM-023EGTM-EG-007Envoy GatewayThere is a risk of unauthorised access due to the use of basic authentication, which does not enforce any password restriction in terms of complexity and length. In addition, password hashes are stored in SHA1 format, which is a deprecated hashing function.

Unauthorised access to the application due to weak authentication mechanisms.

HighIt is recommended to make use of stronger authentication mechanisms (i.e. JWT authentication and OIDC authentication) instead of basic authentication. These authentication mechanisms have many advantages, such as the use of short-lived credentials and a central management of security policies through the identity provider.
EGTM-008EGTM-EG-003Envoy GatewayThere is a risk of a threat actor misconfiguring static config and compromising the integrity of Envoy Gateway, ultimately leading to the compromised confidentiality, integrity, or availability of tenant data and cluster resources.

Accidental or deliberate misconfiguration of static configuration leads to a misconfigured deployment of Envoy Gateway, for example logging parameters could be modified or global rate limiting configuration misconfigured.

MediumImplement a GitOps model, utilising Kubernetes' Role-Based Access Control (RBAC) and adhering to the principle of least privilege to minimise human intervention on the cluster. For instance, tools like ArgoCD can be used for declarative GitOps deployments, ensuring all changes are tracked and reviewed. Additionally, configure your source control management (SCM) system to include mandatory pull request (PR) reviews, commit signing, and protected branches to ensure only authorised changes can be committed to the start-up configuration.
EGTM-010EGTM-CS-005Container SecurityThere is a risk that a threat actor exploits a weak pod security context, compromising the CIA of a node and the resources / services which run on it.

Threat Actor who has compromised a pod exploits weak security context to escape to a node, potentially leading to the compromise of Envoy Proxy or Gateway running on the same node.

MediumTo mitigate this risk, apply Pod Security Standards at a minimum of Baseline level to all namespaces, especially those containing Envoy Gateway and Proxy Pods. Pod security standards are implemented through K8s Pod Security Admission to provide admission control modes (enforce, audit, and warn) for namespaces. Pod security standards can be enforced by namespace labels as shown here, to enforce a baseline level of pod security to specific namespaces.

Further enhance the security by implementing a sandboxing solution such as gVisor for Envoy Gateway and Proxy Pods to isolate the application from the host kernel. This can be set within the runtimeClassName of the Pod specification.
EGTM-012EGTM-GW-004Gateway APIThere is a risk that a threat actor could abuse excessive RBAC privileges to create ReferenceGrant resources. These resources could then be used to create cross-namespace communication, leading to unauthorised access to the application. This could compromise the confidentiality and integrity of resources and configuration in the affected namespaces and potentially disrupt the availability of services that rely on these object references.

A ReferenceGrant is created, which validates traffic to cross namespace trust boundaries without a valid business reason, such as a route in one tenant's namespace referencing a backend in another.

MediumEnsure that the ability to create ReferenceGrant resources is restricted to the minimum number of people. Pay special attention to ClusterRoles that allow that action.
EGTM-018EGTM-GW-006Gateway APIThere is a risk that malicious requests could lead to a Denial of Service (DoS) attack, thereby reducing API gateway availability due to misconfigurations in rate-limiting or load balancing controls, or a lack of route timeout enforcement.

Reduced API gateway availability due to an attacker's maliciously crafted request (e.g., QoD) potentially inducing a Denial of Service (DoS) attack.

MediumTo ensure high availability and to mitigate potential security threats, adhere to the Envoy Gateway documentation for the configuration of a rate-limiting filter and load balancing.

Further, adhere to best practices for configuring Envoy Proxy as an edge proxy documented here within the EnvoyProxy docs. This involves configuring TCP and HTTP proxies with specific settings, including restricting access to the admin endpoint, setting the overload manager and listener / cluster buffer limits, enabling use_remote_address, setting connection and stream timeouts, limiting maximum concurrent streams, setting initial stream window size limit, and configuring action on headers_with_underscores.

Path normalisation should be enabled to minimise path confusion vulnerabilities. These measures help protect against volumetric threats such as Denial of Service (DoS)nattacks. Utilise custom resources to implement policy attachment, thereby exposing request limit configuration for route types.
EGTM-019EGTM-DP-004Container SecurityThere is a risk that replay attacks using stolen or reused JSON Web Tokens (JWTs) can compromise transmission integrity, thereby undermining the confidentiality and integrity of the data plane.

Transmission integrity is compromised due to replay attacks using stolen or reused JSON Web Tokens (JWTs).

MediumComply with JWT best practices for enhanced security, paying special attention to the use of short-lived tokens, which reduce the window of opportunity for a replay attack. The exp claim can be used to set token expiration times.
EGTM-024EGTM-EG-008Envoy GatewayThere is a risk of developers getting more privileges than required due to the use of SecurityPolicy, ClientTrafficPolicy, EnvoyPatchPolicy and BackendTrafficPolicy. These resources can be attached to a Gateway resource. Therefore, a developer with permission to deploy them would be able to modify a Gateway configuration by targeting the gateway in the policy manifest. This conflicts with the Advanced 4 Tier Model, where developers do not have write permissions on Gateways.

Excessive developer permissions lead to a misconfiguration and/or unauthorised access.

MediumConsidering the Tenant C scenario (represented in the Architecture Diagram), if a developer can create SecurityPolicy, ClientTrafficPolicy, EnvoyPatchPolicy or BackendTrafficPolicy objects in namespace C, they would be able to modify a Gateway configuration by attaching the policy to the gateway. In such scenarios, it is recommended to either:

a. Create a separate namespace, where developers have no permissions, > to host tenant C's gateway. Note that, due to design decisions, > the > SecurityPolicy/EnvoyPatchPolicy/ClientTrafficPolicy/BackendTrafficPolicy > object can only target resources deployed in the same namespace. > Therefore, having a separate namespace for the gateway would > prevent developers from attaching the policy to the gateway.

b. Forbid the creation of these policies for developers in namespace C.

On the other hand, in scenarios similar to tenants A and B, where a shared gateway namespace is in place, this issue is more limited. Note that in this scenario, developers don't have access to the shared gateway namespace.

In addition, it is important to mention that EnvoyPatchPolicy resources can also be attached to GatewayClass resources. This means that, in order to comply with the Advanced 4 Tier model, individuals with the Application Administrator role should not have access to this resource either.
EGTM-003EGTM-EG-001Envoy GatewayThere is a risk that a threat actor could downgrade the security of proxied connections by configuring a weak set of cipher suites, compromising the confidentiality and integrity of proxied traffic.

Exploit weak cipher suite configuration to downgrade security of proxied connections.

LowUsers operating in highly regulated environments may need to tightly control the TLS protocol and associated cipher suites, blocking non-conforming incoming connections to the gateway.

EnvoyProxy bootstrap config can be customised as per the customise EnvoyProxy documentation. In addition, from v.1.0.0, it is possible to configure common TLS properties for a Gateway or XRoute through the ClientTrafficPolicy object.
EGTM-005EGTM-CP-002Container SecurityThreat actor who has obtained access to Envoy Gateway pod could exploit the lack of AppArmor and Seccomp profiles in the Envoy Gateway deployment to attempt a container breakout, given the presence of an exploitable vulnerability, potentially impacting the confidentiality and integrity of namespace resources.

Unauthorised syscalls and malicious code running in the Envoy Gateway pod.

LowImplement AppArmor policies by setting <container_name>: <profile_ref> within container.apparmor.security.beta.kubernetes.io (note, this config is set per container). Well-defined AppArmor policies may provide greater protection from unknown threats.

Enforce Seccomp profiles by setting the seccompProfile under securityContext. Ideally, a fine-grained profile should be used to restrict access to only necessary syscalls, however the --seccomp-default flag can be set to resort to RuntimeDefault which provides a container runtime specific. Example seccomp profiles can be found here.

To further enhance pod security, consider implementing SELinux via seLinuxOptions for additional syscall attack surface reduction. Setting readOnlyRootFilesystem == true enforces an immutable root filesystem, preventing the addition of malicious binaries to the PATH and increasing the attack cost. Together, these configuration items improve the pods Security Context.
EGTM-006EGTM-CS-004Container SecurityThere is a risk that a threat actor exploits a vulnerability in Envoy Proxy to expose a reverse shell, enabling them to compromise the confidentiality, integrity and availability of tenant data via a secondary attack.

If an external attacker managed to exploit a vulnerability in Envoy, the presence of a shell would be greatly helpful for the attacker in terms of potentially pivoting, escalating, or establishing some form of persistence.

LowBy default, Envoy uses a distroless image since v.0.6.0, which does not ship a shell. Therefore, ensure EnvoyProxy image is up-to-date and patched with the latest stable version.

If using private EnvoyProxy images, use a lightweight EnvoyProxy image without a shell or debugging tool(s) which may be useful for an attacker.

An AuditPolicy (audit.k8s.io/v1beta1) can be configured to record API calls made within your cluster, allowing for identification of malicious traffic and enabling incident response. Requests are recorded based on stages which delineate between the lifecycle stage of the request made (e.g., RequestReceived, ResponseStarted, & ResponseComplete).
EGTM-011EGTM-GW-003Gateway APIThere is a risk that a gateway owner (or someone with the ability to set namespace labels) maliciously or accidentally binds routes across namespace boundaries, potentially compromising the confidentiality and integrity of traffic in a multitenant scenario.

If a Route Binding within a Gateway Listener is configured based on a custom label, it could allow a malicious internal actor with the ability to label namespaces to change the set of namespaces supported by the Gateway

LowConsider the use of custom admission control to restrict what labels can be set on namespaces through tooling such as Kubewarden, Kyverno, and OPA Gatekeeper. Route binding should follow the Kubernetes Gateway API security model, as shown here, to connect gateways in different namespaces.
EGTM-013EGTM-GW-005Gateway APIThere is a risk that an unauthorised actor deploys an unauthorised GatewayClass due to GatewayClass namespace validation not being configured, leading to non-compliance with business and security requirements.

Unauthorised deployment of Gateway resource via GatewayClass template which crosses namespace trust boundaries.

LowLeverage GatewayClass namespace validation to limit the namespaces where GatewayClasses can be run through a tool such as using OPA Gatekeeper. Reference pull request #24 within gatekeeper-library which outlines how to add GatewayClass namespace validation through a GatewayClassNamespaces API resource kind within the constraints.gatekeeper.sh/v1beta1 apiGroup.
EGTM-015EGTM-CS-007Container SecurityThere is a risk that threat actors could exploit ServiceAccount tokens for illegitimate authentication, thereby leading to privilege escalation and the undermining of gateway API resources' integrity, confidentiality, and availability.

The threat arises from threat actors impersonating the envoy-gateway ServiceAccount through the replay of ServiceAccount tokens, thereby achieving escalated privileges and gaining unauthorised access to Kubernetes resources.

LowLimit the creation of ServiceAccounts to only when necessary, specifically refraining from using default service account tokens, especially for high-privilege service accounts. For legacy clusters running Kubernetes version 1.21 or earlier, note that ServiceAccount tokens are long-lived by default. To disable the automatic mounting of the service account token, set automountServiceAccountToken: false in the PodSpec.
EGTM-016EGTM-EG-004Envoy GatewayThere is a risk that threat actors establish persistence and move laterally through the cluster unnoticed due to limited visibility into access and application-level activity.

Threat actors establish persistence and move laterally through the cluster unnoticed.

LowConfigure access logging in the EnvoyProxy. Use ProxyAccessLogFormatType (Text or JSON) to specify the log format and ensure that the logs are sent to the desired sink types by setting the ProxyAccessLogSinkType. Make use of FileEnvoyProxyAccessLog or OpenTelemetryEnvoyProxyAccessLog to configure File and OpenTelemetry sinks, respectively. If the settings aren't defined, the default format is sent to stdout.

Additionally, consider leveraging a central logging mechanism such as Fluentd to enhance visibility into access activity and enable effective incident response (IR).
EGTM-017EGTM-EG-005Envoy GatewayThere is a risk that an insider misconfigures an envoy gateway component and goes unnoticed due to a low-touch logging configuration (via default) which responsible stakeholders are not aptly aware of or have immediate access to.

The threat emerges from an insider misconfiguring an Envoy Gateway component without detection.

LowConfigure the logging level of the Envoy Gateway using the 'level' field in EnvoyGatewayLogging. Ensure the appropriate logging levels are set for relevant components such as 'gateway-api', 'xds-translator', or 'global-ratelimit'. If left unspecified, the logging level defaults to "info", which may not provide sufficient detail for security monitoring.

Employ a centralised logging mechanism, like Fluentd, to enhance visibility into application-level activity and to enable efficient incident response.
EGTM-021EGTM-EG-006Envoy GatewayThere is a risk that the admin interface is exposed without valid business reason, increasing the attack surface.

Exposed admin interfaces give internal attackers the option to affect production traffic in unauthorised ways, and the option to exploit any vulnerabilities which may be present in the admin interface (e.g. by orchestrating malicious GET requests to the admin interface through CSRF, compromising Envoy Proxy global configuration or shutting off the service entirely (e.g., /quitquitquit).

LowThe Envoy Proxy admin interface is only exposed to localhost, meaning that it is secure by default. However, due to the risk of misconfiguration, this recommendation is included.

Due to the importance of the admin interface, it is recommended to ensure that Envoy Proxies have not been accidentally misconfigured to expose the admin interface to untrusted networks.
EGTM-025EGTM-CS-011Container SecurityThe presence of a vulnerability, be it in the kernel or another system component, when coupled with containers running as root, could enable a threat actor to escape the container, thereby compromising the confidentiality, integrity, or availability of cluster resources.The Envoy Proxy container’s root-user configuration can be leveraged by an attacker to escalate privileges, execute a container breakout, and traverse across trust boundaries.LowBy default, Envoy Gateway deployments do not use root users. Nonetheless, in case a custom image or deployment manifest is to be used, make sure Envoy Proxy pods run as a non-root user with a high UID within the container. Set runAsUser and runAsGroup security context options to specific UIDs (e.g., runAsUser: 1000 & runAsGroup: 3000) to ensure the container operates with the stipulated non-root user and group ID. If using helm chart deployment, define the user and group ID in the values.yaml file or via the command line during helm install / upgrade.

Attack Trees

Attack trees offer a methodical way of describing the security of systems, based on varying attack patterns. It’s important to approach the review of attack trees from a top-down perspective. The top node, also known as the root node, symbolises the attacker’s primary objective. This goal is then broken down into subsidiary aims, each reflecting a different strategy to attain the root objective. This deconstruction persists until reaching the lowest level objectives or ’leaf nodes’, which depict attacks that can be directly launched.

It is essential to note that attack trees presented here are speculative paths for potential exploitation. The Envoy Gateway project is in a continuous development cycle, and as the project evolves, new vulnerabilities may be exposed, or additional controls could be introduced. Therefore, the threats illustrated in the attack trees should be perceived as point-in-time reflections of the project’s current state at the time of writing this threat model.

Node ID Schema

Each node in the attack tree is assigned a unique identifier following the AT#-## schema. This allows easy reference to specific nodes in the attack trees throughout the threat model. The first part of the ID (AT#) signifies the attack tree number, while the second part (##) represents the node number within that tree.

Logical Operators

Logical AND/OR operators are used to represent the relationship between parent and child nodes. An AND operator means that all child nodes must be achieved to satisfy the parent node. An OR operator between a parent node and its child nodes means that any of the child nodes can be achieved to satisfy the parent node.

Attack Tree Node Legend

AT Legend

AT0

AT0

AT1

AT1

AT2

AT2

AT3

AT3

AT4

AT4

AT5

AT5

AT6

AT6

1.3.10 - TLS Passthrough

This task will walk through the steps required to configure TLS Passthrough via Envoy Gateway. Unlike configuring Secure Gateways, where the Gateway terminates the client TLS connection, TLS Passthrough allows the application itself to terminate the TLS connection, while the Gateway routes the requests to the application based on SNI headers.

Prerequisites

  • OpenSSL to generate TLS assets.

Installation

Follow the steps from the Quickstart to install Envoy Gateway and the example manifest. Before proceeding, you should be able to query the example backend using HTTP.

TLS Certificates

Generate the certificates and keys used by the Service to terminate client TLS connections. For the application, we’ll deploy a sample echoserver app, with the certificates loaded in the application Pod.

Note: These certificates will not be used by the Gateway, but will remain in the application scope.

Create a root certificate and private key to sign certificates:

openssl req -x509 -sha256 -nodes -days 365 -newkey rsa:2048 -subj '/O=example Inc./CN=example.com' -keyout example.com.key -out example.com.crt

Create a certificate and a private key for passthrough.example.com:

openssl req -out passthrough.example.com.csr -newkey rsa:2048 -nodes -keyout passthrough.example.com.key -subj "/CN=passthrough.example.com/O=some organization"
openssl x509 -req -sha256 -days 365 -CA example.com.crt -CAkey example.com.key -set_serial 0 -in passthrough.example.com.csr -out passthrough.example.com.crt

Store the cert/keys in A Secret:

kubectl create secret tls server-certs --key=passthrough.example.com.key --cert=passthrough.example.com.crt

Deployment

Deploy TLS Passthrough application Deployment, Service and TLSRoute:

kubectl apply -f https://raw.githubusercontent.com/envoyproxy/gateway/latest/examples/kubernetes/tls-passthrough.yaml

Patch the Gateway from the Quickstart to include a TLS listener that listens on port 6443 and is configured for TLS mode Passthrough:

kubectl patch gateway eg --type=json --patch '
  - op: add
    path: /spec/listeners/-
    value:
      name: tls
      protocol: TLS
      hostname: passthrough.example.com
      port: 6443
      tls:
        mode: Passthrough
   '

Testing

Clusters without External LoadBalancer Support

Get the name of the Envoy service created the by the example Gateway:

export ENVOY_SERVICE=$(kubectl get svc -n envoy-gateway-system --selector=gateway.envoyproxy.io/owning-gateway-namespace=default,gateway.envoyproxy.io/owning-gateway-name=eg -o jsonpath='{.items[0].metadata.name}')

Port forward to the Envoy service:

kubectl -n envoy-gateway-system port-forward service/${ENVOY_SERVICE} 6043:6443 &

Curl the example app through Envoy proxy:

curl -v --resolve "passthrough.example.com:6043:127.0.0.1" https://passthrough.example.com:6043 \
--cacert passthrough.example.com.crt

Clusters with External LoadBalancer Support

You can also test the same functionality by sending traffic to the External IP of the Gateway:

export GATEWAY_HOST=$(kubectl get gateway/eg -o jsonpath='{.status.addresses[0].value}')

Curl the example app through the Gateway, e.g. Envoy proxy:

curl -v -HHost:passthrough.example.com --resolve "passthrough.example.com:6443:${GATEWAY_HOST}" \
--cacert example.com.crt https://passthrough.example.com:6443/get

Clean-Up

Follow the steps from the Quickstart to uninstall Envoy Gateway and the example manifest.

Delete the Secret:

kubectl delete secret/server-certs

Next Steps

Checkout the Developer Guide to get involved in the project.

1.3.11 - TLS Termination for TCP

This guide will walk through the steps required to configure TLS Terminate mode for TCP traffic via Envoy Gateway. The guide uses a self-signed CA, so it should be used for testing and demonstration purposes only.

Prerequisites

  • OpenSSL to generate TLS assets.

Installation

Follow the steps from the Quickstart to install Envoy Gateway.

TLS Certificates

Generate the certificates and keys used by the Gateway to terminate client TLS connections.

Create a root certificate and private key to sign certificates:

openssl req -x509 -sha256 -nodes -days 365 -newkey rsa:2048 -subj '/O=example Inc./CN=example.com' -keyout example.com.key -out example.com.crt

Create a certificate and a private key for www.example.com:

openssl req -out www.example.com.csr -newkey rsa:2048 -nodes -keyout www.example.com.key -subj "/CN=www.example.com/O=example organization"
openssl x509 -req -days 365 -CA example.com.crt -CAkey example.com.key -set_serial 0 -in www.example.com.csr -out www.example.com.crt

Store the cert/key in a Secret:

kubectl create secret tls example-cert --key=www.example.com.key --cert=www.example.com.crt

Install the TLS Termination for TCP example resources:

kubectl apply -f https://raw.githubusercontent.com/envoyproxy/gateway/latest/examples/kubernetes/tls-termination.yaml

Verify the Gateway status:

kubectl get gateway/eg -o yaml

Testing

Clusters without External LoadBalancer Support

Get the name of the Envoy service created the by the example Gateway:

export ENVOY_SERVICE=$(kubectl get svc -n envoy-gateway-system --selector=gateway.envoyproxy.io/owning-gateway-namespace=default,gateway.envoyproxy.io/owning-gateway-name=eg -o jsonpath='{.items[0].metadata.name}')

Port forward to the Envoy service:

kubectl -n envoy-gateway-system port-forward service/${ENVOY_SERVICE} 8443:443 &

Query the example app through Envoy proxy:

curl -v -HHost:www.example.com --resolve "www.example.com:8443:127.0.0.1" \
--cacert example.com.crt https://www.example.com:8443/get

Clusters with External LoadBalancer Support

Get the External IP of the Gateway:

export GATEWAY_HOST=$(kubectl get gateway/eg -o jsonpath='{.status.addresses[0].value}')

Query the example app through the Gateway:

curl -v -HHost:www.example.com --resolve "www.example.com:443:${GATEWAY_HOST}" \
--cacert example.com.crt https://www.example.com/get

1.3.12 - Using cert-manager For TLS Termination

This guide shows how to set up cert-manager to automatically create certificates and secrets for use by Envoy Gateway. It will first show how to enable the self-sign issuer, which is useful to test that cert-manager and Envoy Gateway can talk to each other. Then it shows how to use Let’s Encrypt’s staging environment. Changing to the Let’s Encrypt production environment is straight-forward after that.

Prerequisites

  • A Kubernetes cluster and a configured kubectl.
  • The helm command.
  • The curl command or similar for testing HTTPS requests.
  • For the ACME HTTP-01 challenge to work
    • your Gateway must be reachable on the public Internet.
    • the domain name you use (we use www.example.com) must point to the Gateway’s external IP(s).

Installation

Follow the steps from the Quickstart to install Envoy Gateway and the example manifest. Before proceeding, you should be able to query the example backend using HTTP.

Deploying cert-manager

This is a summary of cert-manager Installation with Helm.

Installing cert-manager is straight-forward, but currently (v1.12) requires setting a feature gate to enable the Gateway API support.

$ helm repo add jetstack https://charts.jetstack.io
$ helm upgrade --install --create-namespace --namespace cert-manager --set installCRDs=true --set featureGates=ExperimentalGatewayAPISupport=true cert-manager jetstack/cert-manager

You should now have cert-manager running with nothing to do:

$ kubectl wait --for=condition=Available deployment -n cert-manager --all
deployment.apps/cert-manager condition met
deployment.apps/cert-manager-cainjector condition met
deployment.apps/cert-manager-webhook condition met

$ kubectl get -n cert-manager deployment
NAME                      READY   UP-TO-DATE   AVAILABLE   AGE
cert-manager              1/1     1            1           42m
cert-manager-cainjector   1/1     1            1           42m
cert-manager-webhook      1/1     1            1           42m

A Self-Signing Issuer

cert-manager can have any number of issuer configurations. The simplest issuer type is SelfSigned. It simply takes the certificate request and signs it with the private key it generates for the TLS Secret.

Self-signed certificates don't provide any help in establishing trust between certificates.
However, they are great for initial testing, due to their simplicity.

To install self-signing, run

$ kubectl apply -f - <<EOF
apiVersion: cert-manager.io/v1
kind: ClusterIssuer
metadata:
  name: selfsigned
spec:
  selfSigned: {}
EOF

Creating a TLS Gateway Listener

We now have to patch the example Gateway to reference cert-manager:

$ kubectl patch gateway/eg --patch '
metadata:
  annotations:
    cert-manager.io/cluster-issuer: selfsigned
    cert-manager.io/common-name: "Hello World!"
spec:
  listeners:
  - name: https
    protocol: HTTPS
    hostname: www.example.com
    port: 443
    tls:
      mode: Terminate
      certificateRefs:
      - kind: Secret
        name: eg-https
' --type=merge

You could instead create a new Gateway serving HTTPS, if you’d prefer. cert-manager doesn’t care, but we’ll keep it all together in this guide.

Nowadays, X.509 certificates don’t use the subject Common Name for hostname matching, so you can set it to whatever you want, or leave it empty. The important parts here are

  • the annotation referencing the “selfsigned” ClusterIssuer we created above,
  • the hostname, which is required (but see #6051 for computing it based on attached HTTPRoutes), and
  • the named Secret, which is what cert-manager will create for us.

The annotations are documented in Supported Annotations.

Patching the Gateway makes cert-manager create a self-signed certificate within a few seconds. Eventually, the Gateway becomes Programmed again:

$ kubectl wait --for=condition=Programmed gateway/eg
gateway.gateway.networking.k8s.io/eg condition met

Testing The Gateway

See Testing in Secure Gateways for the general idea.

Since we have a self-signed certificate, curl will by default reject it, requiring the -k flag:

$ curl -kv -HHost:www.example.com https://127.0.0.1/get
...
* Server certificate:
*  subject: CN=Hello World!
...
< HTTP/2 200
...

How cert-manager and Envoy Gateway Interact

This explains cert-manager Concepts in an Envoy Gateway context.

In the interaction between the two, cert-manager does all the heavy lifting. It subscribes to changes to Gateway resources (using the gateway-shim component.) For any Gateway it finds, it looks for any TLS listeners, and the associated tls.certificateRefs. Note that while Gateway API supports multiple refs here, Envoy Gateway only uses one. cert-manager also looks at the hostname of the listener to figure out which hosts the certificate is expected to cover. More than one listener can use the same certificate Secret, which means cert-manager needs to find all listeners using the same Secret before deciding what to do. If the certificatRef points to a valid certificate, given the hostnames found in listeners, cert-manager has nothing to do.

If there is no valid certificate, or it is about to expire, cert-manager’s gateway-shim creates a Certificate resource, or updates the existing one. cert-manager then follows the Certificate Lifecycle. To know how to issue the certificate, an ClusterIssuer is configured, and referenced through annotations on the Gateway resource, which you did above. Once a matching ClusterIssuer is found, that plugin does what needs to be done to acquire a signed certificate.

In the case of the ACME protocol (used by Let’s Encrypt), cert-manager can also use an HTTP Gateway to solve the HTTP-01 challenge type. This is the other side of cert-manager’s Gateway API support: the ACME issuer creates a temporary HTTPRoute, lets the ACME server(s) query it, and deletes it again.

cert-manager then updates the Secret that the Gateway’s listener points to in tls.certificateRefs. Envoy Gateway picks up that the Secret has changed, and reloads the corresponding Envoy Proxy Deployments with the new private key and certificate.

As you can imagine, cert-manager requires quite broad permissions to update Secrets in any namespace, so the security-minded reader may want to look at the RBAC resources the Helm chart creates.

Using the ACME Issuer With Let’s Encrypt and HTTP-01

We will start using the Let’s Encrypt staging environment, to spare their production environment. Our Gateway already contains an HTTP listener, so we will use that for the HTTP-01 challenges.

$ CERT_MANAGER_CONTACT_EMAIL=$(git config user.email)  # Or whatever...
$ kubectl apply -f - <<EOF
apiVersion: cert-manager.io/v1
kind: ClusterIssuer
metadata:
  name: letsencrypt-staging
spec:
  acme:
    server: https://acme-staging-v02.api.letsencrypt.org/directory
    email: "$CERT_MANAGER_CONTACT_EMAIL"
    privateKeySecretRef:
      name: letsencrypt-staging-account-key
    solvers:
    - http01:
        gatewayHTTPRoute:
          parentRefs:
          - kind: Gateway
            name: eg
            namespace: default
EOF

The important parts are

  • using spec.acme with a server URI and contact email address, and
  • referencing our plain HTTP gateway so the challenge HTTPRoute is attached to the right place.

Check the account registration process using the Ready condition:

$ kubectl wait --for=condition=Ready clusterissuer/letsencrypt-staging
$ kubectl describe clusterissuer/letsencrypt-staging
...
Status:
  Acme:
    Uri:                   https://acme-staging-v02.api.letsencrypt.org/acme/acct/123456789
  Conditions:
    Message:               The ACME account was registered with the ACME server
    Reason:                ACMEAccountRegistered
    Status:                True
    Type:                  Ready
...

Now we’re ready to update the Gateway annotation to use this issuer instead:

$ kubectl annotate --overwrite gateway/eg cert-manager.io/cluster-issuer=letsencrypt-staging

The Gateway should be picked up by cert-manager, which will create a new certificate for you, and replace the Secret.

You should see a new CertificateRequest to track:

$ kubectl get certificaterequest
NAME             APPROVED   DENIED   READY   ISSUER                REQUESTOR                                         AGE
eg-https-xxxxx   True                True    selfsigned            system:serviceaccount:cert-manager:cert-manager   42m
eg-https-xxxxx   True                True    letsencrypt-staging   system:serviceaccount:cert-manager:cert-manager   42m

Testing The Gateway

We still require the -k flag, since the Let’s Encrypt staging environment CA is not widely trusted.

$ curl -kv -HHost:www.example.com https://127.0.0.1/get
...
* Server certificate:
*  subject: CN=Hello World!
*  issuer: C=US; O=(STAGING) Let's Encrypt; CN=(STAGING) Ersatz Edamame E1
...
< HTTP/2 200
...

Using The Let’s Encrypt Production Environment

Changing to the production environment is just a matter of replacing the server URI:

$ CERT_MANAGER_CONTACT_EMAIL=$(git config user.email)  # Or whatever...
$ kubectl apply -f - <<EOF
apiVersion: cert-manager.io/v1
kind: ClusterIssuer
metadata:
  name: letsencrypt
spec:
  acme:
    server: https://acme-v02.api.letsencrypt.org/directory  # Removed "-staging".
    email: "$CERT_MANAGER_CONTACT_EMAIL"
    privateKeySecretRef:
      name: letsencrypt-account-key                         # Removed "-staging".
    solvers:
    - http01:
        gatewayHTTPRoute:
          parentRefs:
          - kind: Gateway
            name: eg
            namespace: default
EOF

And now you can update the Gateway listener to point to letsencrypt instead:

$ kubectl annotate --overwrite gateway/eg cert-manager.io/cluster-issuer=letsencrypt

As before, track it by looking at CertificateRequests.

Testing The Gateway

Once the certificate has been replaced, we should finally be able to get rid of the -k flag:

$ curl -v -HHost:www.example.com --resolve www.example.com:127.0.0.1 https://www.example.com/get
...
* Server certificate:
*  subject: CN=Hello World!
*  issuer: C=US; O=Let's Encrypt; CN=R3
...
< HTTP/2 200
...

Collecting Garbage

You probably want to set the cert-manager.io/revision-history-limit annotation on your Gateway to make cert-manager prune the CertificateRequest history.

cert-manager deletes unused Certificate resources, and they are updated in-place when possible, so there should be no need for cleaning up Certificate resources. The deletion is based on whether a Gateway still holds a tls.certificateRefs that requires the Certificate.

If you remove a TLS listener from a Gateway, you may still have a Secret lingering. cert-manager can clean it up using a flag.

Issuer Namespaces

We have used ClusterIssuer resources in this tutorial. They are not bound to any namespace, and will read annotations from Gateways in any namespace. You could also use Issuer, which is bound to a namespace. This is useful e.g. if you want to use different ACME accounts for different namespaces.

If you change the issuer kind, you also need to change the annotation key from cert-manager.io/clusterissuer to cert-manager.io/issuer.

Using ExternalDNS

The ExternalDNS controller maintains DNS records based on Kubernetes resources. Together with cert-manager, this can be used to fully automate hostname management. It can use various source resources, among them Gateway Routes. Just specify a Gateway Route resource, let ExternalDNS create the domain records, and then cert-manager the TLS certificate.

The tutorial on Gateway API uses kubectl. They also have a Helm chart, which is easier to customize. The only thing relevant to Envoy Gateway is to set the sources:

# values.yaml
sources:
- gateway-httproute
- gateway-grpcroute
- gateway-tcproute
- gateway-tlsroute
- gateway-udproute

Monitoring Progress / Troubleshooting

You can monitor progress in several ways:

The Issuer has a Ready condition (though this is rather boring for the selfSigned type):

$ kubectl get issuer --all-namespaces
NAMESPACE   NAME         READY   AGE
default     selfsigned   True    42m

The Gateway will say when it has an invalid certificate:

$ kubectl describe gateway/eg
...
    Conditions:
      Message:               Secret default/eg-https does not exist.
      Reason:                InvalidCertificateRef
      Status:                False
      Type:                  ResolvedRefs
...
      Message:               Listener is invalid, see other Conditions for details.
      Reason:                Invalid
      Status:                False
      Type:                  Programmed
...
Events:
  Type     Reason     Age    From                       Message
  ----     ------     ----   ----                       -------
  Warning  BadConfig  42m    cert-manager-gateway-shim  Skipped a listener block: spec.listeners[1].hostname: Required value: the hostname cannot be empty

The main question is if cert-manager has picked up on the Gateway. I.e., has it created a Certificate for it? The above describe contains an event from cert-manager-gateway-shim telling you of one such issue. Be aware that if you have a non-TLS listener in the Gateway, like we did, there will be events saying it is not eligible, which is of course expected.

Another option is looking at Deployment logs. The cert-manager logs are not very verbose by default, but setting the Helm value global.logLevel to 6 will enable all debug logs (the default is 2.) This will make them verbose enough to say why a Gateway wasn’t considered (e.g. missing hostname, or tls.mode is not Terminate.)

$ kubectl logs -n cert-manager deployment/cert-manager
...

Simply listing Certificate resources may be useful, even if it just gives a yes/no answer:

$ kubectl get certificate --all-namespaces
NAMESPACE   NAME       READY   SECRET     AGE
default     eg-https   True    eg-https   42m

If there is a Certificate, then the gateway-shim has recognized the Gateway. But is there a CertificateRequest for it? (BTW, don’t confuse this with a CertificateSigningRequest, which is a Kubernetes core resource type representing the same thing.)

$ kubectl get certificaterequest --all-namespaces
NAMESPACE   NAME             APPROVED   DENIED   READY   ISSUER       REQUESTOR                                         AGE
default     eg-https-xxxxx   True                True    selfsigned   system:serviceaccount:cert-manager:cert-manager   42m

The ACME issuer also has Order and Challenge resources to watch:

$ kubectl get order --all-namespaces -o wide
NAME                                                     STATE     ISSUER                REASON   AGE
order.acme.cert-manager.io/envoy-https-xxxxx-123456789   pending   letsencrypt-staging            42m

$ kubectl get challenge --all-namespaces
NAME                                                                    STATE     DOMAIN            AGE
challenge.acme.cert-manager.io/envoy-https-xxxxx-123456789-1234567890   pending   www.example.com   42m

Using kubetctl get -o wide or kubectl describe on the Challenge will explain its state more.

$ kubectl get order --all-namespaces -o wide
NAME                                                     STATE   ISSUER                REASON   AGE
order.acme.cert-manager.io/envoy-https-xxxxx-123456789   valid   letsencrypt-staging            42m

Finally, since cert-manager creates the Secret referenced by the Gateway listener as its last step, we can also look for that:

$ kubectl get secret secret/eg-https
NAME       TYPE                DATA   AGE
eg-https   kubernetes.io/tls   3      42m

Clean Up

  • Uninstall cert-manager: helm uninstall --namespace cert-manager cert-manager
  • Delete the cert-manager namespace: kubectl delete namespace/cert-manager
  • Delete the https listener from gateway/eg.
  • Delete secret/eg-https.

See Also

1.4 - Extensibility

This section includes extensibility tasks

1.4.1 - Envoy Patch Policy

This task explains the usage of the EnvoyPatchPolicy API. Note: This API is meant for users extremely familiar with Envoy xDS semantics. Also before considering this API for production use cases, please be aware that this API is unstable and the outcome may change across versions. Use at your own risk.

Introduction

The EnvoyPatchPolicy API allows user to modify the output xDS configuration generated by Envoy Gateway intended for EnvoyProxy, using JSON Patch semantics.

Motivation

This API was introduced to allow advanced users to be able to leverage Envoy Proxy functionality not exposed by Envoy Gateway APIs today.

Quickstart

Prerequisites

  • Follow the steps from the Quickstart task to install Envoy Gateway and the example manifest. Before proceeding, you should be able to query the example backend using HTTP.

Enable EnvoyPatchPolicy

  • By default EnvoyPatchPolicy is disabled. Lets enable it in the EnvoyGateway startup configuration

  • The default installation of Envoy Gateway installs a default EnvoyGateway configuration and attaches it using a ConfigMap. In the next step, we will update this resource to enable EnvoyPatchPolicy.

cat <<EOF | kubectl apply -f -
apiVersion: v1
kind: ConfigMap
metadata:
  name: envoy-gateway-config
  namespace: envoy-gateway-system
data:
  envoy-gateway.yaml: |
    apiVersion: gateway.envoyproxy.io/v1alpha1
    kind: EnvoyGateway
    provider:
      type: Kubernetes
    gateway:
      controllerName: gateway.envoyproxy.io/gatewayclass-controller
    extensionApis:
      enableEnvoyPatchPolicy: true
EOF
  • After updating the ConfigMap, you will need to restart the envoy-gateway deployment so the configuration kicks in
kubectl rollout restart deployment envoy-gateway -n envoy-gateway-system

Testing

Customize Response

  • Use EnvoyProxy’s Local Reply Modification feature to return a custom response back to the client when the status code is 404

  • Apply the configuration

cat <<EOF | kubectl apply -f -
apiVersion: gateway.envoyproxy.io/v1alpha1
kind: EnvoyPatchPolicy
metadata:
  name: custom-response-patch-policy
  namespace: default
spec:
  targetRef:
    group: gateway.networking.k8s.io
    kind: Gateway
    name: eg
    namespace: default
  type: JSONPatch
  jsonPatches:
    - type: "type.googleapis.com/envoy.config.listener.v3.Listener"
      # The listener name is of the form <GatewayNamespace>/<GatewayName>/<GatewayListenerName>
      name: default/eg/http
      operation:
        op: add
        path: "/default_filter_chain/filters/0/typed_config/local_reply_config"
        value:
          mappers:
          - filter:
              status_code_filter:
                comparison:
                  op: EQ
                  value:
                    default_value: 404
                    runtime_key: key_b
            status_code: 406
            body:
              inline_string: "could not find what you are looking for"
EOF

When mergeGateways is enabled, there will be one Envoy deployment for all Gateways in the cluster. Then the EnvoyPatchPolicy should target a specific GatewayClass.

cat <<EOF | kubectl apply -f -
apiVersion: gateway.envoyproxy.io/v1alpha1
kind: EnvoyPatchPolicy
metadata:
  name: custom-response-patch-policy
  namespace: default
spec:
  targetRef:
    group: gateway.networking.k8s.io
    kind: GatewayClass
    name: eg
    namespace: default
  type: JSONPatch
  jsonPatches:
    - type: "type.googleapis.com/envoy.config.listener.v3.Listener"
      # The listener name is of the form <GatewayNamespace>/<GatewayName>/<GatewayListenerName>
      name: default/eg/http
      operation:
        op: add
        path: "/default_filter_chain/filters/0/typed_config/local_reply_config"
        value:
          mappers:
          - filter:
              status_code_filter:
                comparison:
                  op: EQ
                  value:
                    default_value: 404
                    runtime_key: key_b
            status_code: 406
            body:
              inline_string: "could not find what you are looking for"
EOF
  • Edit the HTTPRoute resource from the Quickstart to only match on paths with value /get
kubectl patch httproute backend --type=json --patch '
  - op: add
    path: /spec/rules/0/matches/0/path/value
    value: /get
  '
  • Test it out by specifying a path apart from /get
$ curl --header "Host: www.example.com" http://localhost:8888/find
Handling connection for 8888
could not find what you are looking for

Debugging

Runtime

  • The Status subresource should have information about the status of the resource. Make sure Accepted=True and Programmed=True conditions are set to ensure that the policy has been applied to Envoy Proxy.
apiVersion: gateway.envoyproxy.io/v1alpha1
kind: EnvoyPatchPolicy
metadata:
  annotations:
    kubectl.kubernetes.io/last-applied-configuration: |
      {"apiVersion":"gateway.envoyproxy.io/v1alpha1","kind":"EnvoyPatchPolicy","metadata":{"annotations":{},"name":"custom-response-patch-policy","namespace":"default"},"spec":{"jsonPatches":[{"name":"default/eg/http","operation":{"op":"add","path":"/default_filter_chain/filters/0/typed_config/local_reply_config","value":{"mappers":[{"body":{"inline_string":"could not find what you are looking for"},"filter":{"status_code_filter":{"comparison":{"op":"EQ","value":{"default_value":404}}}}}]}},"type":"type.googleapis.com/envoy.config.listener.v3.Listener"}],"priority":0,"targetRef":{"group":"gateway.networking.k8s.io","kind":"Gateway","name":"eg","namespace":"default"},"type":"JSONPatch"}}      
  creationTimestamp: "2023-07-31T21:47:53Z"
  generation: 1
  name: custom-response-patch-policy
  namespace: default
  resourceVersion: "10265"
  uid: a35bda6e-a0cc-46d7-a63a-cee765174bc3
spec:
  jsonPatches:
  - name: default/eg/http
    operation:
      op: add
      path: /default_filter_chain/filters/0/typed_config/local_reply_config
      value:
        mappers:
        - body:
            inline_string: could not find what you are looking for
          filter:
            status_code_filter:
              comparison:
                op: EQ
                value:
                  default_value: 404
    type: type.googleapis.com/envoy.config.listener.v3.Listener
  priority: 0
  targetRef:
    group: gateway.networking.k8s.io
    kind: Gateway
    name: eg
    namespace: default
  type: JSONPatch
status:
  conditions:
  - lastTransitionTime: "2023-07-31T21:48:19Z"
    message: EnvoyPatchPolicy has been accepted.
    observedGeneration: 1
    reason: Accepted
    status: "True"
    type: Accepted
  - lastTransitionTime: "2023-07-31T21:48:19Z"
    message: successfully applied patches.
    reason: Programmed
    status: "True"
    type: Programmed

Offline

Caveats

This API will always be an unstable API and the same outcome cannot be garunteed across versions for these reasons

  • The Envoy Proxy API might deprecate and remove API fields
  • Envoy Gateway might alter the xDS translation creating a different xDS output such as changing the name field of resources.

1.5 - Observability

This section includes observability tasks.

1.5.1 - Gateway API Metrics

Resource metrics for Gateway API objects are available using the Gateway API State Metrics project. The project also provides example dashboard for visualising the metrics using Grafana, and example alerts using Prometheus & Alertmanager.

Prerequisites

Follow the steps from the Quickstart to install Envoy Gateway and the example manifest. Before proceeding, you should be able to query the example backend using HTTP.

Run the following commands to install the metrics stack, with the Gateway API State Metrics configuration, on your kubernetes cluster:

kubectl apply --server-side -f https://raw.githubusercontent.com/Kuadrant/gateway-api-state-metrics/main/config/examples/kube-prometheus/bundle_crd.yaml
kubectl apply -f https://raw.githubusercontent.com/Kuadrant/gateway-api-state-metrics/main/config/examples/kube-prometheus/bundle.yaml

Metrics and Alerts

To access the Prometheus UI, wait for the statefulset to be ready, then use the port-forward command:

# This first command may fail if the statefulset has not been created yet.
# In that case, try again until you get a message like 'Waiting for 2 pods to be ready...'
# or 'statefulset rolling update complete 2 pods...'
kubectl -n monitoring rollout status --watch --timeout=5m statefulset/prometheus-k8s
kubectl -n monitoring port-forward service/prometheus-k8s 9090:9090 > /dev/null &

Navigate to http://localhost:9090. Metrics can be queried from the ‘Graph’ tab e.g. gatewayapi_gateway_created See the Gateway API State Metrics README for the full list of Gateway API metrics available.

Alerts can be seen in the ‘Alerts’ tab. Gateway API specific alerts will be grouped under the ‘gateway-api.rules’ heading.

Note: Alerts are defined in a PrometheusRules custom resource in the ‘monitoring’ namespace. You can modify the alert rules by updating this resource.

Dashboards

To view the dashboards in Grafana, wait for the deployment to be ready, then use the port-forward command:

kubectl -n monitoring wait --timeout=5m deployment/grafana --for=condition=Available
kubectl -n monitoring port-forward service/grafana 3000:3000 > /dev/null &

Navigate to http://localhost:3000 and sign in with admin/admin. The Gateway API State dashboards will be available in the ‘Default’ folder and tagged with ‘gateway-api’. See the Gateway API State Metrics README for further information on available dashboards.

Note: Dashboards are loaded from configmaps. You can modify the dashboards in the Grafana UI, however you will need to export them from the UI and update the json in the configmaps to persist changes.

1.5.2 - Proxy Observability

Envoy Gateway provides observability for the ControlPlane and the underlying EnvoyProxy instances. This guide show you how to config proxy observability, includes metrics, logs, and traces.

Prerequisites

Follow the steps from the Quickstart to install Envoy Gateway and the example manifest. Before proceeding, you should be able to query the example backend using HTTP.

FluentBit is used to collect logs from the EnvoyProxy instances and forward them to Loki. Install FluentBit:

helm repo add fluent https://fluent.github.io/helm-charts
helm repo update
helm upgrade --install fluent-bit fluent/fluent-bit -f https://raw.githubusercontent.com/envoyproxy/gateway/latest/examples/fluent-bit/helm-values.yaml -n monitoring --create-namespace --version 0.30.4

Loki is used to store logs. Install Loki:

kubectl apply -f https://raw.githubusercontent.com/envoyproxy/gateway/latest/examples/loki/loki.yaml -n monitoring 

Tempo is used to store traces. Install Tempo:

helm repo add grafana https://grafana.github.io/helm-charts
helm repo update
helm upgrade --install tempo grafana/tempo -f https://raw.githubusercontent.com/envoyproxy/gateway/latest/examples/tempo/helm-values.yaml -n monitoring --create-namespace --version 1.3.1

OpenTelemetry Collector offers a vendor-agnostic implementation of how to receive, process and export telemetry data. Install OTel-Collector:

helm repo add open-telemetry https://open-telemetry.github.io/opentelemetry-helm-charts
helm repo update
helm upgrade --install otel-collector open-telemetry/opentelemetry-collector -f https://raw.githubusercontent.com/envoyproxy/gateway/latest/examples/otel-collector/helm-values.yaml -n monitoring --create-namespace --version 0.60.0

Expose endpoints:

LOKI_IP=$(kubectl get svc loki -n monitoring -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
TEMPO_IP=$(kubectl get svc tempo -n monitoring -o jsonpath='{.status.loadBalancer.ingress[0].ip}')

Metrics

By default, Envoy Gateway expose metrics with prometheus endpoint.

Verify metrics:

export ENVOY_POD_NAME=$(kubectl get pod -n envoy-gateway-system --selector=gateway.envoyproxy.io/owning-gateway-namespace=default,gateway.envoyproxy.io/owning-gateway-name=eg -o jsonpath='{.items[0].metadata.name}')
kubectl port-forward pod/$ENVOY_POD_NAME -n envoy-gateway-system 19001:19001

# check metrics 
curl localhost:19001/stats/prometheus  | grep "default/backend/rule/0/match/0-www"

You can disable metrics by setting the telemetry.metrics.prometheus.disable to true in the EnvoyProxy CRD.

kubectl apply -f https://raw.githubusercontent.com/envoyproxy/gateway/latest/examples/kubernetes/metric/disable-prometheus.yaml

Envoy Gateway can send metrics to OpenTelemetry Sink. Send metrics to OTel-Collector:

kubectl apply -f https://raw.githubusercontent.com/envoyproxy/gateway/latest/examples/kubernetes/metric/otel-sink.yaml

Verify OTel-Collector metrics:

export OTEL_POD_NAME=$(kubectl get pod -n monitoring --selector=app.kubernetes.io/name=opentelemetry-collector -o jsonpath='{.items[0].metadata.name}')
kubectl port-forward pod/$OTEL_POD_NAME -n monitoring 19001:19001

# check metrics 
curl localhost:19001/metrics  | grep "default/backend/rule/0/match/0-www"

Logs

If custom format string is not specified, Envoy Gateway uses the following default format:

{"start_time":"%START_TIME%","method":"%REQ(:METHOD)%","x-envoy-origin-path":"%REQ(X-ENVOY-ORIGINAL-PATH?:PATH)%","protocol":"%PROTOCOL%","response_code":"%RESPONSE_CODE%","response_flags":"%RESPONSE_FLAGS%","response_code_details":"%RESPONSE_CODE_DETAILS%","connection_termination_details":"%CONNECTION_TERMINATION_DETAILS%","upstream_transport_failure_reason":"%UPSTREAM_TRANSPORT_FAILURE_REASON%","bytes_received":"%BYTES_RECEIVED%","bytes_sent":"%BYTES_SENT%","duration":"%DURATION%","x-envoy-upstream-service-time":"%RESP(X-ENVOY-UPSTREAM-SERVICE-TIME)%","x-forwarded-for":"%REQ(X-FORWARDED-FOR)%","user-agent":"%REQ(USER-AGENT)%","x-request-id":"%REQ(X-REQUEST-ID)%",":authority":"%REQ(:AUTHORITY)%","upstream_host":"%UPSTREAM_HOST%","upstream_cluster":"%UPSTREAM_CLUSTER%","upstream_local_address":"%UPSTREAM_LOCAL_ADDRESS%","downstream_local_address":"%DOWNSTREAM_LOCAL_ADDRESS%","downstream_remote_address":"%DOWNSTREAM_REMOTE_ADDRESS%","requested_server_name":"%REQUESTED_SERVER_NAME%","route_name":"%ROUTE_NAME%"}

Note: Envoy Gateway disable envoy headers by default, you can enable it by setting EnableEnvoyHeaders to true in the ClientTrafficPolicy CRD.

Verify logs from loki:

curl -s "http://$LOKI_IP:3100/loki/api/v1/query_range" --data-urlencode "query={job=\"fluentbit\"}" | jq '.data.result[0].values'

If you want to disable it, set the telemetry.accesslog.disable to true in the EnvoyProxy CRD.

kubectl apply -f https://raw.githubusercontent.com/envoyproxy/gateway/latest/examples/kubernetes/accesslog/disable-accesslog.yaml

Envoy Gateway can send logs to OpenTelemetry Sink.

kubectl apply -f https://raw.githubusercontent.com/envoyproxy/gateway/latest/examples/kubernetes/accesslog/otel-accesslog.yaml

Verify logs from loki:

curl -s "http://$LOKI_IP:3100/loki/api/v1/query_range" --data-urlencode "query={exporter=\"OTLP\"}" | jq '.data.result[0].values'

Traces

By default, Envoy Gateway doesn’t send traces to OpenTelemetry Sink. You can enable traces by setting the telemetry.tracing in the EnvoyProxy CRD.

Note: Envoy Gateway use 100% sample rate, which means all requests will be traced. This may cause performance issues.

kubectl apply -f https://raw.githubusercontent.com/envoyproxy/gateway/latest/examples/kubernetes/tracing/default.yaml

Verify traces from tempo:

curl -s "http://$TEMPO_IP:3100/api/search" --data-urlencode "q={ component=envoy }" | jq .traces
curl -s "http://$TEMPO_IP:3100/api/traces/<trace_id>" | jq

1.5.3 - Visualising metrics using Grafana

Envoy Gateway provides support for exposing Envoy Proxy metrics to a Prometheus instance. This guide shows you how to visualise the metrics exposed to prometheus using grafana.

Prerequisites

Follow the steps from the Quickstart to install Envoy Gateway and the example manifest. Before proceeding, you should be able to query the example backend using HTTP.

Follow the steps from the Proxy Observability to enable prometheus metrics.

Prometheus is used to scrape metrics from the Envoy Proxy instances. Install Prometheus:

helm repo add prometheus-community https://prometheus-community.github.io/helm-charts
helm repo update
helm upgrade --install prometheus prometheus-community/prometheus -n monitoring --create-namespace

Grafana is used to visualise the metrics exposed by the envoy proxy instances. Install Grafana:

helm repo add grafana https://grafana.github.io/helm-charts
helm repo update
helm upgrade --install grafana grafana/grafana -f https://raw.githubusercontent.com/envoyproxy/gateway/latest/examples/grafana/helm-values.yaml -n monitoring --create-namespace

Expose endpoints:

GRAFANA_IP=$(kubectl get svc grafana -n monitoring -o jsonpath='{.status.loadBalancer.ingress[0].ip}')

Connecting Grafana with Prometheus datasource

To visualise metrics from Prometheus, we have to connect Grafana with Prometheus. If you installed Grafana from the command from prerequisites sections, the prometheus datasource should be already configured.

You can also add the data source manually by following the instructions from Grafana Docs.

Accessing Grafana

You can access the Grafana instance by visiting http://{GRAFANA_IP}, derived in prerequisites.

To log in to Grafana, use the credentials admin:admin.

Envoy Gateway has examples of dashboard for you to get started:

Envoy Proxy Global

Envoy Proxy Global

Envoy Clusters

Envoy Clusters

Envoy Pod Resources

Envoy Pod Resources

You can load the above dashboards in your Grafana to get started. Please refer to Grafana docs for importing dashboards.

1.6 - Operations

This section includes operations-related tasks.

1.6.1 - Customize EnvoyProxy

Envoy Gateway provides an EnvoyProxy CRD that can be linked to the ParametersRef in GatewayClass, allowing cluster admins to customize the managed EnvoyProxy Deployment and Service. To learn more about GatewayClass and ParametersRef, please refer to Gateway API documentation.

Installation

Follow the steps from the Quickstart to install Envoy Gateway and the example manifest. Before proceeding, you should be able to query the example backend using HTTP.

Add GatewayClass ParametersRef

First, you need to add ParametersRef in GatewayClass, and refer to EnvoyProxy Config:

cat <<EOF | kubectl apply -f -
apiVersion: gateway.networking.k8s.io/v1
kind: GatewayClass
metadata:
  name: eg
spec:
  controllerName: gateway.envoyproxy.io/gatewayclass-controller
  parametersRef:
    group: gateway.envoyproxy.io
    kind: EnvoyProxy
    name: custom-proxy-config
    namespace: envoy-gateway-system
EOF

Save and apply the following resource to your cluster:

---
apiVersion: gateway.networking.k8s.io/v1
kind: GatewayClass
metadata:
  name: eg
spec:
  controllerName: gateway.envoyproxy.io/gatewayclass-controller
  parametersRef:
    group: gateway.envoyproxy.io
    kind: EnvoyProxy
    name: custom-proxy-config
    namespace: envoy-gateway-system

Customize EnvoyProxy Deployment Replicas

You can customize the EnvoyProxy Deployment Replicas via EnvoyProxy Config like:

cat <<EOF | kubectl apply -f -
apiVersion: gateway.envoyproxy.io/v1alpha1
kind: EnvoyProxy
metadata:
  name: custom-proxy-config
  namespace: envoy-gateway-system
spec:
  provider:
    type: Kubernetes
    kubernetes:
      envoyDeployment:
        replicas: 2
EOF

Save and apply the following resource to your cluster:

---
apiVersion: gateway.envoyproxy.io/v1alpha1
kind: EnvoyProxy
metadata:
  name: custom-proxy-config
  namespace: envoy-gateway-system
spec:
  provider:
    type: Kubernetes
    kubernetes:
      envoyDeployment:
        replicas: 2

After you apply the config, you should see the replicas of envoyproxy changes to 2. And also you can dynamically change the value.

kubectl get deployment -l gateway.envoyproxy.io/owning-gateway-name=eg -n envoy-gateway-system

Customize EnvoyProxy Image

You can customize the EnvoyProxy Image via EnvoyProxy Config like:

cat <<EOF | kubectl apply -f -
apiVersion: gateway.envoyproxy.io/v1alpha1
kind: EnvoyProxy
metadata:
  name: custom-proxy-config
  namespace: envoy-gateway-system
spec:
  provider:
    type: Kubernetes
    kubernetes:
      envoyDeployment:
        container:
          image: envoyproxy/envoy:v1.25-latest
EOF

Save and apply the following resource to your cluster:

---
apiVersion: gateway.envoyproxy.io/v1alpha1
kind: EnvoyProxy
metadata:
  name: custom-proxy-config
  namespace: envoy-gateway-system
spec:
  provider:
    type: Kubernetes
    kubernetes:
      envoyDeployment:
        container:
          image: envoyproxy/envoy:v1.25-latest

After applying the config, you can get the deployment image, and see it has changed.

Customize EnvoyProxy Pod Annotations

You can customize the EnvoyProxy Pod Annotations via EnvoyProxy Config like:

cat <<EOF | kubectl apply -f -
apiVersion: gateway.envoyproxy.io/v1alpha1
kind: EnvoyProxy
metadata:
  name: custom-proxy-config
  namespace: envoy-gateway-system
spec:
  provider:
    type: Kubernetes
    kubernetes:
      envoyDeployment:
        pod:
          annotations:
            custom1: deploy-annotation1
            custom2: deploy-annotation2
EOF

Save and apply the following resource to your cluster:

---
apiVersion: gateway.envoyproxy.io/v1alpha1
kind: EnvoyProxy
metadata:
  name: custom-proxy-config
  namespace: envoy-gateway-system
spec:
  provider:
    type: Kubernetes
    kubernetes:
      envoyDeployment:
        pod:
          annotations:
            custom1: deploy-annotation1
            custom2: deploy-annotation2

After applying the config, you can get the envoyproxy pods, and see new annotations has been added.

Customize EnvoyProxy Deployment Resources

You can customize the EnvoyProxy Deployment Resources via EnvoyProxy Config like:

cat <<EOF | kubectl apply -f -
apiVersion: gateway.envoyproxy.io/v1alpha1
kind: EnvoyProxy
metadata:
  name: custom-proxy-config
  namespace: envoy-gateway-system
spec:
  provider:
    type: Kubernetes
    kubernetes:
      envoyDeployment:
        container:
          resources:
            requests:
              cpu: 150m
              memory: 640Mi
            limits:
              cpu: 500m
              memory: 1Gi
EOF

Save and apply the following resource to your cluster:

---
apiVersion: gateway.envoyproxy.io/v1alpha1
kind: EnvoyProxy
metadata:
  name: custom-proxy-config
  namespace: envoy-gateway-system
spec:
  provider:
    type: Kubernetes
    kubernetes:
      envoyDeployment:
        container:
          resources:
            requests:
              cpu: 150m
              memory: 640Mi
            limits:
              cpu: 500m
              memory: 1Gi

Customize EnvoyProxy Deployment Env

You can customize the EnvoyProxy Deployment Env via EnvoyProxy Config like:

cat <<EOF | kubectl apply -f -
apiVersion: gateway.envoyproxy.io/v1alpha1
kind: EnvoyProxy
metadata:
  name: custom-proxy-config
  namespace: envoy-gateway-system
spec:
  provider:
    type: Kubernetes
    kubernetes:
      envoyDeployment:
        container:
          env:
          - name: env_a
            value: env_a_value
          - name: env_b
            value: env_b_value
EOF

Save and apply the following resource to your cluster:

---
apiVersion: gateway.envoyproxy.io/v1alpha1
kind: EnvoyProxy
metadata:
  name: custom-proxy-config
  namespace: envoy-gateway-system
spec:
  provider:
    type: Kubernetes
    kubernetes:
      envoyDeployment:
        container:
          env:
          - name: env_a
            value: env_a_value
          - name: env_b
            value: env_b_value

Envoy Gateway has provided two initial env ENVOY_GATEWAY_NAMESPACE and ENVOY_POD_NAME for envoyproxy container.

After applying the config, you can get the envoyproxy deployment, and see resources has been changed.

Customize EnvoyProxy Deployment Volumes or VolumeMounts

You can customize the EnvoyProxy Deployment Volumes or VolumeMounts via EnvoyProxy Config like:

cat <<EOF | kubectl apply -f -
apiVersion: gateway.envoyproxy.io/v1alpha1
kind: EnvoyProxy
metadata:
  name: custom-proxy-config
  namespace: envoy-gateway-system
spec:
  provider:
    type: Kubernetes
    kubernetes:
      envoyDeployment:
        container:
          volumeMounts:
          - mountPath: /certs
            name: certs
            readOnly: true
        pod:
          volumes:
          - name: certs
            secret:
              secretName: envoy-cert
EOF

Save and apply the following resource to your cluster:

---
apiVersion: gateway.envoyproxy.io/v1alpha1
kind: EnvoyProxy
metadata:
  name: custom-proxy-config
  namespace: envoy-gateway-system
spec:
  provider:
    type: Kubernetes
    kubernetes:
      envoyDeployment:
        container:
          volumeMounts:
          - mountPath: /certs
            name: certs
            readOnly: true
        pod:
          volumes:
          - name: certs
            secret: